Snapper CP216019KWV, CP215519HV Remove bearing and replace with new bearing

Page 18

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3.4.Replacing Driven Disc Rubber Ring (Continued from previous page)

2.Using needle nose pliers, unhook the drive spring and slide the driven disc assembly off the hex shaft. See Figure 4.12.

3.Remove the five machine screws and plate which secure the rubber ring to the driven disc hub. See Figure 4.13.

4.Install new rubber ring.

5.Reverse above procedures for reassembly and installation.

REMOVE

SPRING

REMOVE

DRIVEN DISC

ASSEMBLY

FIGURE 4.12

DRIVEN DISC HUB

MACHINE

SCREWS

4.3.5.Replacing Bearing In Driven Disc Assembly If the driven disc bearing fails, remove the driven disc assembly and replace bearing as follows:

1. Remove pin and washer from transfer rod, and remove end of transfer rod from hole in driven disc assembly. See Figure 4.9.

2. Using needle nose pliers, unhook the drive spring and slide the driven disc assembly off the hex shaft. See Figure 4.12.

3. Remove snap ring that secures driven disc hub to thrust plate. See Figure 4.14.

4. Slide the hub assembly out of the bearing.

5. Remove the four screws.

6. Remove bearing and replace with new bearing.

7. Reassemble components in reverse order.

THRUST

SHIM

PLATE

WASHER

 

SNAP

 

RING

BEARING

 

REMOVE FOUR

 

MACHINE

 

SCREWS

DRIVEN DISC

 

 

HUB

DRIVEN DISC

RUBBER

DISC

PLATE

 

 

 

FIGURE 4.14

RUBBER

RING

PLATE

FIGURE 4.13

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Engine Designation Series Designation Engine Horse Power Steel Deck Walk Mowers Commercial Models SeriesImportant Safety Instructions From Previous Do not refuel the machine indoorsFrom Previous Column Important Safety Instructions Table of Contents Engine Speed Control IntroductionNomenclature PRE-START Check List Starting & Operation Engine & BladePropelling Mower Handle Height AdjustmentCutting Height Adjustment StoppingLatch Position Cutting Height Settings Removing and Dumping Grass Catcher Slide Closure Type Recycling Operation Service After First 5 Hours 3.2.1. Change Engine OIL Dispose of drain oil properlyCheck Mower Blade Service AnnuallyStorage Procedure Check Engine Drive BeltMower Blade Replacement Standard Blade Wear Limit Blade Sharpening1.A. Ninja Blade Wear Limit Wheel Drive Control Adjustment Drive Spring Repair/Replacement Driven and Drive Disc ServiceCleaning Drive Disc & Driven Disc Driven Disc AdjustmentOn Next Replacing Driven Disc Rubber Ring Remove bearing and replace with new bearing Reassemble components in reverse orderBelt Service Engine Drive Belt Replacement Stretch Type BeltsOn Next Reinstall blade hub and cutter blade Pulley PositionProblem Probable Cause Corrective Action100 Service Performed EachMAINTENANCE/REPLACEMENT Parts USE HRS SeasonYear Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Page Steel Deck Walk Behind Mowers Commercial Models Series

CP215019KW, CP215519HV, CP216019KWV, CP215519HV specifications

The Snapper CP216019KWV, CP215519HV, CP215019KW, and CP215519HV models are robust lawn mowers designed to cater to various residential and professional mowing needs. Each model is built with cutting-edge technologies and features that enhance performance, durability, and user-friendliness.

The CP216019KWV is favored for its powerful 21-inch cutting deck that allows for efficient mowing over large areas. With a 190cc engine, it delivers reliable performance and impressive torque, ensuring that grass cutting is smooth and effortless. The adjustable cutting height provides users with the flexibility to achieve their desired lawn appearance, making it suitable for different grass types. Furthermore, it boasts a self-propelling mechanism which allows for easy maneuvering, especially on hilly terrains.

In contrast, the CP215519HV model stands out with its innovative Variable Speed Drive system. This feature enables the operator to adjust the mower's speed according to their walking pace, making it more comfortable to use over extended periods. The 21-inch deck is also designed for versatility, allowing for both bagging and mulching options, which enhances the mowing experience and benefits lawn health.

The CP215019KW is another model that focuses on efficiency and power. With a 150cc engine, this mower is lightweight yet formidable, providing enough power for residential yard maintenance. Its compact design makes it easy to store, while still offering features like an easy-start recoil and a durable steel deck that guarantees longevity. The integrated bagging system collects clippings neatly, keeping lawns tidy.

Finally, the CP215519HV model presents a balanced option with user-friendly features and a solid construction. It integrates a powerful engine that ensures consistent grass cutting capabilities and a quick-change height adjustment lever to transition seamlessly between different grass lengths. Its dual-lever height adjustment system enhances precision, allowing for custom cutting heights tailored to specific lawn requirements.

All four models are equipped with Snapper's commitment to quality, making them excellent choices for anyone looking to maintain a manicured lawn. With ergonomic designs, easy-to-use features, and durable construction, they provide powerful solutions for both novice and seasoned gardeners alike.
Top Page Image Contents