Snapper CP215019KW, CP215519HV PRE-START Check List, Starting & Operation Engine & Blade

Page 7

Section 2 - OPERATING INSTRUCTIONS

2.1PRE-START CHECK LIST

Make the following checks and perform the service required before each start-up.

2.1.1.Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened.

2.1.2.Check blade control, wheel drive control, and engine speed control to insure they work freely. See Figure 2.1.

BLADE

CONTROL

WHEEL

DRIVE

CONTROL

ENGINE

SPEED

CONTROL

FIGURE 2.1

2.1.3.Check cutting height. Adjust to desired height. Refer to Section “OPERATING INSTRUCTIONS –

CUTTING HEIGHT ADJUSTMENT”.

2.1.4.Check engine oil and add as needed to bring level up to ‘full’ mark on dipstick. See Figure 2.2. (Kawasaki engine shown, fuel and oil fill locations may vary with engine.) Refer to Engine Owner’s Manual for oil specifications.

2.1.5.Add fuel to tank. See Figure 2.2. Fuel mower outside where fumes can safely dissipate. Make sure cap is tightened after refueling. Refer to Engine Owners Manual for fuel specifications.

OIL FILL/

DIPSTICK

FUEL

FILL

2.1.6. Clean exterior surfaces of cutting deck and engine of any accumulation of spilled fuel, dirt, grass, oil, etc. Keep engine air intake screen and cooling fins clear at all times.

2.2STARTING & OPERATION

2.2.1.ENGINE & BLADE

1.Make sure fuel valve on engine is open. See Figure 2.3 (Kawasaki engines) or Figure 2.3a (Honda engines).

FUEL

VALVE

CLOSE

OPEN

FIGURE 2.3

FUEL SHUT OFF VALVE

SHOWN IN THE “ON”

POSITION

FIGURE 2.3a

2.Move engine speed control past “Fast” detent to “Choke” position. See Figure 2.4 and

“FAMILIARIZATION”.

3.Pull blade control against handle.

4.Pull rope start handle to crank engine.

FIGURE 2.2

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Steel Deck Walk Mowers Commercial Models Series Engine Designation Series Designation Engine Horse PowerImportant Safety Instructions Do not refuel the machine indoors From PreviousFrom Previous Column Important Safety Instructions Table of Contents Introduction Engine Speed ControlNomenclature Starting & Operation Engine & Blade PRE-START Check ListStopping Handle Height AdjustmentCutting Height Adjustment Propelling MowerLatch Position Cutting Height Settings Removing and Dumping Grass Catcher Slide Closure Type Recycling Operation Dispose of drain oil properly Service After First 5 Hours 3.2.1. Change Engine OILCheck Engine Drive Belt Service AnnuallyStorage Procedure Check Mower BladeBlade Sharpening Mower Blade Replacement Standard Blade Wear Limit1.A. Ninja Blade Wear Limit Wheel Drive Control Adjustment Driven Disc Adjustment Driven and Drive Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementOn Next Replacing Driven Disc Rubber Ring Reassemble components in reverse order Remove bearing and replace with new bearingEngine Drive Belt Replacement Stretch Type Belts Belt ServiceOn Next Pulley Position Reinstall blade hub and cutter bladeCorrective Action Problem Probable CauseUSE HRS Season Service Performed EachMAINTENANCE/REPLACEMENT Parts 100Disclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Page Steel Deck Walk Behind Mowers Commercial Models Series

CP215019KW, CP215519HV, CP216019KWV, CP215519HV specifications

The Snapper CP216019KWV, CP215519HV, CP215019KW, and CP215519HV models are robust lawn mowers designed to cater to various residential and professional mowing needs. Each model is built with cutting-edge technologies and features that enhance performance, durability, and user-friendliness.

The CP216019KWV is favored for its powerful 21-inch cutting deck that allows for efficient mowing over large areas. With a 190cc engine, it delivers reliable performance and impressive torque, ensuring that grass cutting is smooth and effortless. The adjustable cutting height provides users with the flexibility to achieve their desired lawn appearance, making it suitable for different grass types. Furthermore, it boasts a self-propelling mechanism which allows for easy maneuvering, especially on hilly terrains.

In contrast, the CP215519HV model stands out with its innovative Variable Speed Drive system. This feature enables the operator to adjust the mower's speed according to their walking pace, making it more comfortable to use over extended periods. The 21-inch deck is also designed for versatility, allowing for both bagging and mulching options, which enhances the mowing experience and benefits lawn health.

The CP215019KW is another model that focuses on efficiency and power. With a 150cc engine, this mower is lightweight yet formidable, providing enough power for residential yard maintenance. Its compact design makes it easy to store, while still offering features like an easy-start recoil and a durable steel deck that guarantees longevity. The integrated bagging system collects clippings neatly, keeping lawns tidy.

Finally, the CP215519HV model presents a balanced option with user-friendly features and a solid construction. It integrates a powerful engine that ensures consistent grass cutting capabilities and a quick-change height adjustment lever to transition seamlessly between different grass lengths. Its dual-lever height adjustment system enhances precision, allowing for custom cutting heights tailored to specific lawn requirements.

All four models are equipped with Snapper's commitment to quality, making them excellent choices for anyone looking to maintain a manicured lawn. With ergonomic designs, easy-to-use features, and durable construction, they provide powerful solutions for both novice and seasoned gardeners alike.
Top Page Image Contents