Snapper 7800393, 7800392 Torque Mower Blade Hardware, Torquing the mower blade hardware 33 Deck

Page 12

Axion / 150Z Series

Torque Mower

Blade Hardware

1.Check to see that the blade and hardware are installed according to the diagram shown (A, Figures 8-10).

2.Torque the blade hardware to the noted torque (B):

Note: Use a wooden block to prevent blade rotation.

A

B

41-54 N.m.

30-40 ft. lbs.

Figure 8. Torquing the mower blade hardware (33” Deck)

TP 300-5412---ZT-SN

12

8/2008

Image 12

Contents Axion / 150Z Series Table of Contents Safety Rules Ignition System Service and Maintenance Quick Setup List Uncrating Important NoteBattery Activation Installation Charge Battery Installing the Seat Installing the seatInstalling the Seat Safety Switch Installing the seat safety switchSetting Up the Ground Speed Control Levers Setting up the ground speed leversTorque Mower Blade Hardware Torquing the mower blade hardware 33 DeckTorquing the mower blade hardware 50 Deck Check Fluid Levels Reduce & Check Tire PressuresLubrication GreaseCheck Rider Safety System Burnish PTO Clutch