Snapper 7800269, 7800392, 7800382, 7800393, 7800386, 7800374 Installing the Seat, Installing the seat

Page 9

Axion / 150Z Series

Installing the Seat

1.Raise the seat base.

2.Align the holes in the seat bottom with the holes in the seat base.

3.Secure the seat to the seat base with four 5/16-18 x 3/4” bolts. Torque to 14-19 ft. lbs. (19-25 N.m.) See Figure 5.

19-25 N.m.

14-19 ft. lbs.

5/16-18 x 3/4

Figure 5. Installing the seat

8/2008

9

TP 300-5412---ZT-SN

Image 9

Contents Axion / 150Z Series Table of Contents Safety Rules Ignition System Service and Maintenance Quick Setup List Important Note UncratingCharge Battery Battery Activation InstallationInstalling the seat Installing the SeatInstalling the seat safety switch Installing the Seat Safety SwitchSetting up the ground speed levers Setting Up the Ground Speed Control LeversTorquing the mower blade hardware 33 Deck Torque Mower Blade HardwareTorquing the mower blade hardware 50 Deck Reduce & Check Tire Pressures Check Fluid LevelsGrease LubricationBurnish PTO Clutch Check Rider Safety System