Snapper 5900683, 5900709, 5900734 manual Training, Preparation, Operation

Page 7

Operator Safety

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is

capable of amputating hands and feet and throwing objects. The triangle in text signifies important cautions

or warnings which must be followed.

Safety

TRAINING

1.Read, understand, and follow all instructions in the manual and on the unit before starting. If the operator(s) or mechanic(s) can not read English it is the owner’s responsibility to explain this material to them.

2.Become familiar with the safe operation of the equipment, operator controls, and safety signs.

3.All operators and mechanics should be trained. The owner is responsible for training the users.

4.Only allow responsible adults, who are familiar with the instructions, to operate the unit.

5.Never let children or untrained people operate or service the equipment. Local regulations may restrict the age of the operator.

6.The owner/user can prevent and is responsible for accidents or injuries occurring to themselves, other people or property.

7.Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower- related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.

PREPARATION

1.Evaluate the terrain to determine what accessories and attachments are needed to properly and safely perform the job. Use only accessories and attachments approved by the manufacturer.

2.Wear appropriate clothing including safety shoes, safety glasses and ear protection. Long hair, loose clothing or jewelry may get tangled in moving parts.

3.Inspect the area where the equipment is to be used and remove all objects such as rocks, toys and wire, which can be thrown by the machine.

4.Use extra care when handling gasoline and other fuels. They are flammable and vapors are explosive.

a)Use only an approved container.

b)Never remove fuel cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke.

c)Never refuel or drain the machine indoors.

5.Check that operator’s presence controls, safety switches and shields are attached and functioning properly. Do not operate unless they are functioning properly.

OPERATION

1. Never run an engine in an enclosed area.

2.Mow only in the daylight or with good artificial light, keeping away from holes and hidden hazards.

3.Be sure all drives are in neutral and parking brake is engaged before starting engine. Only start engine from the operator’s position. Use seat belts if provided.

4.Be sure of your footing while using pedestrian controlled equipment, especially when backing up. Walk, don’t run. Reduced footing could cause slipping.

5.Slow down and use extra care on hillsides. Be sure to travel in the recommended direction on hillsides. Turf conditions can affect the machines stability. Use caution when operating near drop-offs.

6.Do not mow in reverse unless absolutely necessary. Always look down and behind before and while traveling in reverse.

7.Be aware of the mower discharge direction and do not point it at anyone. Do not operate the mower without either the entire grass catcher or the deflector in place.

8.Slow down and use caution when making turns and when changing directions on slopes.

9.Never raise deck with the blades running.

10.Never leave a running unit unattended. Always disengage the PTO, set parking brake, stop engine, and remove keys before dismounting. Keep hands and feet away from the cutting units.

11.Turn off the PTO switch to disengage the blades when not mowing.

12.Never operate with guards not securely in place. Be sure all interlocks are attached, adjusted properly and functioning properly.

13.Never operate with the discharge deflector raised, removed or altered, unless using a grass catcher.

14.Do not change the engine governor setting or overspeed the engine.

15.Stop on level ground, lower implements, disengage drives, engage parking brake, shut off engine before leaving the operator’s position for any reason including emptying the grass catchers or unclogging the chute.

16.Stop equipment and inspect blades after striking objects or abnormal vibration occurs. Make necessary repairs before resuming operations.

17.Keep hands and feet away from the cutting units.

18.Look behind and down before backing up to be sure of a clear path.

19.Never carry passengers and keep pets and bystanders away.

20.Do not operate the unit while under the influence of alcohol or drugs.

21.Slow down and use caution when making turns and crossing roads and sidewalks. Stop blades if not mowing.

22.Use care when loading or unloading the machine into a trailer or truck.

23.Use care when approaching blind corners, shrubs, trees or other objects that may obscure vision.

24.To reduce fire hazard, keep unit free of grass, leaves & excess oil. Do not stop or park over dry leaves, grass or combustible materials.

25.The engine in this unit is not factory equipped with a

5

Image 7
Contents North Main Street Briggs & Stratton Yard Power Products GroupDescription Model NumberDate Purchased Table of Contents Read the Manual Operator SafetyOperator Safety Operating SafetyThrown Objects Slope OperationMoving Parts Retaining WALLS, DROP-OFFS, and Water Fuel and MaintenanceEnclosed Areas Or warnings which must be followed TrainingPreparation OperationPeriods of exposure Towed Equipment RIDE-ON UnitsEmissions Ignition System Gasoline ModelsMaintenance and Storage Service and MaintenanceSafe Handling of Gasoline Safety Decals North American Safety Icons Safety Interlock SystemOperational Safety Checks Safety IconsFeatures and Controls Features and ControlsIdentification Numbers Ground Speed Control Levers Seat Adjustment LeverIgnition Switch Control FunctionsFeatures & Controls Checks Before Starting General Operating SafetyOperation OperationCheck Tire Pressures Seat AdjustmentTire Pressure Foot Pedal Adjustment Mowing Height AdjustmentTo adjust pedal position Pushing the Rider By Hand Insert the key into the ignition switch and turn it toStarting the Engine Stopping the RiderForward Travel Practice Zero Turn Driving PracticeForward Reverse Travel Executing Turns Practice Turning Around a CornerPractice Turning In Place Executing an End-Of-Row Zero TurnTall Grass Requires Incremental Cutting MowingMowing Recommendations Height of GrassMowing Methods Engine Speed & Ground Speed for Mulching Attaching a TrailerProper Mulching Mulching Requires Excellent Mowing ConditionsSafety Items Before Every Spring Regular MaintenanceRegular Maintenance Maintenance ScheduleChange Oil & Filter Engine MaintenanceChecking / Adding Fuel Fuel FilterLubricating the Front Casters LubricationGrease OilCheck / Fill Transmission Oil Change Interval Every 200 Hours Replacement Filter NumberTransmission Oil Filter Change Inspecting the Mower Blades Servicing The Mower BladesNever weld or straighten bent mower blades Balancing the Mower Blade Nail Reinstalling the Mower BladesSpeed Balancing Adjustment Ground Speed Control Lever AdjustmentNeutral Adjustment 375 0,95 cm Parking Brake AdjustmentReturn-to-Neutral Adjustment Jam Nuts Neutral Return Rod Return-to-Neutral AdjustmentMower deck Deck Rod Timing AdjustmentDeck Leveling Adjustment Adjustment is required continue with StepTo avoid damaging belts, do not PRY Belts Over Pulleys Mower Belt Replacement 36 Deck ModelsAt this time Blade Alignment 36 Models Mower PTO Belt Idler Arm Stationary Idler Pulley Mower Belt Replacement 48 Deck ModelsUse extreme caution when removing this spring Hydraulic Pump Drive Belt ReplacementBattery Compartment Battery MaintenanceJump Starting With Auxiliary Booster Battery Battery ServiceChecking Battery Voltage Charging a Completely Discharged BatteryMake Certain Vehicles do not Touch Long Term Storage Longer Than 30 Days StorageStarting After Long Term Storage Temporary Storage 30 Days Or LessTroubleshooting the Rider TroubleshootingTroubleshooting Troubleshooting ChartTroubleshooting Streaking Troubleshooting Common Cutting ProblemsChassis SpecificationsDimensions EngineSurface Vertical a with Edge this Align LineIndentification SlopeFerris Limited Warranty Tractor Product SpecificationsCommon Service Parts HP Kawasaki