Snapper 3317523BVE specifications Operation, Mower Blade, Wheel Drive

Page 11

Operation (Continued)

!

WARNING

!

Once blade is disengaged, it should come to a complete stop in 3 seconds or less. If the blade continues to rotate after 3 seconds, the blade brake must be adjusted. Refer to Section “BLADE BRAKE ADJUSTMENT” for adjustment pro- cedures or return machine to an authorized SNAPPER deal- er for adjustment. DO NOT CONTINUE to operate machine until blade brake is adjusted and functioning properly.

Starting and Operation (Continued)

Mower Blade

1.With the engine running, move the engine speed control to the “FAST” position.

2.Move the blade lever (A, Figure 10) forward to the “ON” position, then depress the blade pedals (B) to hold the blade lever in the “ON” position.

A

B

Figure 10: Engaging the mower blade

Wheel Drive

1.With the engine running, adjust the engine speed control to the “FAST” position.

2.Depress the clutch/brake pedal (A, Figure 11).

3.Place the transmission shift lever (A, Figure 12) into the first forward speed notch (B).

4.Release the clutch/brake pedal to begin forward motion.

5.During forward motion, the transmission shift lever may be placed in any desired forward speed without depressing the clutch/brake pedal.

NOTE: For best cutting results, move the transmission shift lever into a slow forward speed and the engine speed control to a fast position. This combination will allow the mower blades to lift the grass while cutting smoothly and evenly.

!

WARNING

!

DO NOT operate blades in reverse. STOP BLADES. LOOK and SEE behind and down for children, pets and hazards before and while backing.

A

Figure 11: Engaging the clutch/brake pedal

A

B

Figure 12: Transmission shift lever

Operation

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Series Simplicity Manufacturing, Inc Date of Purchase Retailer Retailers Phone Number EquipmentEngine Snapper is a trademarkTable of Contents Do not allow pre-teenage children to operate machine Protection for ChildrenProtection against Tipovers PreparationOperation Safe Handling of GasolineTowing MaintenanceFuel Tank Features and ControlsFeatures and Controls Fuel filler cap A, is tight, and the vent B is OPERATOR’S Seat AdjustmentOperation Pre-Start Check List On Next Operation Operation Starting and OperationEngine Electric Start Engine runs smoothEngine Manual Start Setting the park brakeWheel Drive OperationMower Blade Stop the engine by turning the key A, to the OFF position Stopping Engine Wheel Drive, BladePark Brake Cutting Height AdjustmentOperation Stopping Engine, Wheel Drive BladeWhile backing Operation Reverse Lockout MechanismReverse Lockout Mechanism Override Ate blades in reverse. Stop BLADES, Look and seeIntroduction MaintenanceService After the First 5 Hours Blade Brake Service Brake / Park BrakeBlade Drive Belt Replacement Check the Blade Drive BeltLubrication Grease Fittings Safety Interlock System ChecksCheck Engine Reverse Lockout MechanismService Every 25 Operating Hours Differential / Chain Case Lubrication Engine ServiceRear Axle Bearing Lubrication Removing the Fuel Tank Service AnnuallyEvery Two Years Storage Out of SeasonReinstall the belt cover and tighten the bolts securely Engine Adjustments and RepairMower Deck and Component Adjustments Blade Brake AdjustmentMower Deck Adjustment Front-to-Rear Levelness Mower Deck Adjustment Side-To-Side LevelnessTo the rear main case Mower Drive Belt Adjustment For 28 & 30 Decks OnlyService BRAKE/PARK Brake Adjustment Move the blade lever up and over to the on positionMeasurement should be 3/4 Rear Engine Rider Drive ComponentsSigns of excessive wear or damage Blade Sharpening Mower Blade ReplacementBlade Wear Limits Belt Removal Belt ReplacementDo not attempt any adjustments, maintenance, service or Tled Mower Drive Belt AdjustmentSlide the battery partially into the battery housing BatteryBattery Removal Battery InstallationBattery Testing Battery ServiceBattery Storage New Battery PreparationDescription of Kit Models Used on Snapper Rear Engine Rider AccessoriesBattery Condition Chart Season Maintenance Service ScheduleMaintenance Maintenance/Replacement Parts Stop TroubleshootingProblem Probable Cause Corrective Action Move lever to the on position Year Limited Warranty Slope Guide Page Page Page Page Snapper Products Macon Street McDonough, GA Product Specifications 2811523BVCommon Service Parts

3317523BVE specifications

The Snapper 3317523BVE is a cutting-edge lawn mower designed to cater to homeowners who prioritize performance, efficiency, and ease of use in their gardening tools. This model stands out in the Snapper line for its robust engineering and innovative features, making it an excellent choice for residential lawn care.

One of the key features of the Snapper 3317523BVE is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this mower delivers the necessary power for effective grass cutting, accommodating various grass types and conditions. The engine is not only powerful but also designed for fuel efficiency, allowing users to complete their mowing tasks without frequent refueling interruptions.

The Snapper 3317523BVE boasts a 21-inch cutting deck, which enhances maneuverability even in tight spaces. This compact size makes it suitable for urban and suburban lawns, where obstacles like flower beds and trees are common. Additionally, the cutting height is adjustable, with several settings available to allow for flexibility based on the grass type and weather conditions.

Another notable characteristic of the Snapper 3317523BVE is its innovative rear-wheel drive system. This feature significantly improves traction on slopes and uneven terrains, enabling users to maintain control over the mower, particularly in challenging mowing conditions. The wheels are designed for durability and stability, ensuring that they can handle the rigors of regular use.

The ergonomic handle design on the Snapper 3317523BVE adds to the overall user experience, allowing for comfortable operation. The handle can be adjusted for height, accommodating users of various sizes and preferences, while also providing a folding mechanism for easy storage.

Snapper's patented SmartChoke technology simplifies the starting process, reducing the hassle often associated with traditional mowers. This technology ensures a reliable start every time, even in varying weather conditions.

Moreover, the Snapper 3317523BVE's robust build is complemented by a sturdy plastic housing that is resistant to rust and corrosion, ensuring longevity and maintaining the mower's appearance over time.

Overall, the Snapper 3317523BVE is engineered to provide a seamless and efficient mowing experience, combining power, durability, and user-friendly features. This mower is a testament to Snapper's commitment to quality in the lawn care industry, making it a reliable choice for homeowners looking to maintain their gardens with ease.
Top Page Image Contents