Snapper 3317523BVE specifications Battery Removal, Battery Installation

Page 27

Maintenance (Continued)

!

WARNING

!

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage. DO NOT attempt to service or charge the battery while it is installed on the machine.

Battery

Battery Removal

1.Carefully pull each side of the battery cover (A, Figure 48) away from the ratchet fasteners (B) and remove the cover.

C

B

A

Figure 49: Connecting the battery

A

B

Figure 48: Removing the battery cover

2.Remove the hair pin and swivel from the deck support to allow clearance for battery removal.

3.Slide the battery from the battery box to gain access to the terminal cables.

4.Observe and note the cable positions (A and B, Figure 49) on the battery.

5.Disconnect the cables from the battery terminals, dis- connecting BLACK (Negative) cable (A) first. Retain the mounting bolts and nuts.

!

WARNING

!

The cables must be connected to the battery terminals in the proper position as shown. DO NOT attempt to charge the battery while installed on the Rear Engine Rider. DO NOT use “BOOST” chargers on the battery.

Battery Installation

1.Slide the battery partially into the battery housing.

2.Connect the red positive (+) cable (B, Figure 49) first, from the wiring harness to the positive terminal (+) on the battery, using the bolt and nut provided in the hard- ware bag. Connect the black negative (-) cable (A) last, to the negative terminal (-) on the battery, using the bolt and nut. Apply a small amount of grease over the termi- nals to prevent corrosion.

3.Reinstall the positive terminal insulator (C).

4.Insert the battery completely into the battery housing.

5.Reinstall the battery cover (A, Figure 48).

6.Reinstall the swivel and hair pin for the deck support.

Maintenance

!

CAUTION

!

If the battery is removed, DO NOT operate the engine without insulating the Positive (+) battery cable terminal with electrical tape, or sparking from the battery cables can result.

25

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Series Simplicity Manufacturing, Inc Date of Purchase Retailer Retailers Phone Number EquipmentEngine Snapper is a trademarkTable of Contents Do not allow pre-teenage children to operate machine Protection for ChildrenProtection against Tipovers PreparationOperation Safe Handling of GasolineTowing MaintenanceFeatures and Controls Features and ControlsFuel Tank OPERATOR’S Seat Adjustment Operation Pre-Start Check ListFuel filler cap A, is tight, and the vent B is On Next Operation Operation Starting and OperationEngine Electric Start Engine runs smoothEngine Manual Start Setting the park brakeOperation Mower BladeWheel Drive Stop the engine by turning the key A, to the OFF position Stopping Engine Wheel Drive, BladePark Brake Cutting Height AdjustmentOperation Stopping Engine, Wheel Drive BladeWhile backing Operation Reverse Lockout MechanismReverse Lockout Mechanism Override Ate blades in reverse. Stop BLADES, Look and seeMaintenance Service After the First 5 HoursIntroduction Blade Brake Service Brake / Park BrakeBlade Drive Belt Replacement Check the Blade Drive BeltLubrication Grease Fittings Safety Interlock System ChecksCheck Engine Reverse Lockout MechanismService Every 25 Operating Hours Engine Service Rear Axle Bearing LubricationDifferential / Chain Case Lubrication Removing the Fuel Tank Service AnnuallyEvery Two Years Storage Out of SeasonReinstall the belt cover and tighten the bolts securely Engine Adjustments and RepairMower Deck and Component Adjustments Blade Brake AdjustmentMower Deck Adjustment Front-to-Rear Levelness Mower Deck Adjustment Side-To-Side LevelnessTo the rear main case Mower Drive Belt Adjustment For 28 & 30 Decks OnlyService BRAKE/PARK Brake Adjustment Move the blade lever up and over to the on positionMeasurement should be 3/4 Rear Engine Rider Drive ComponentsMower Blade Replacement Blade Wear LimitsSigns of excessive wear or damage Blade Sharpening Belt Removal Belt ReplacementDo not attempt any adjustments, maintenance, service or Tled Mower Drive Belt AdjustmentSlide the battery partially into the battery housing BatteryBattery Removal Battery InstallationBattery Testing Battery ServiceBattery Storage New Battery PreparationSnapper Rear Engine Rider Accessories Battery Condition ChartDescription of Kit Models Used on Season Maintenance Service ScheduleMaintenance Maintenance/Replacement Parts Troubleshooting Problem Probable Cause Corrective ActionStop Move lever to the on position Year Limited Warranty Slope Guide Page Page Page Page Product Specifications 2811523BV Common Service PartsSnapper Products Macon Street McDonough, GA

3317523BVE specifications

The Snapper 3317523BVE is a cutting-edge lawn mower designed to cater to homeowners who prioritize performance, efficiency, and ease of use in their gardening tools. This model stands out in the Snapper line for its robust engineering and innovative features, making it an excellent choice for residential lawn care.

One of the key features of the Snapper 3317523BVE is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this mower delivers the necessary power for effective grass cutting, accommodating various grass types and conditions. The engine is not only powerful but also designed for fuel efficiency, allowing users to complete their mowing tasks without frequent refueling interruptions.

The Snapper 3317523BVE boasts a 21-inch cutting deck, which enhances maneuverability even in tight spaces. This compact size makes it suitable for urban and suburban lawns, where obstacles like flower beds and trees are common. Additionally, the cutting height is adjustable, with several settings available to allow for flexibility based on the grass type and weather conditions.

Another notable characteristic of the Snapper 3317523BVE is its innovative rear-wheel drive system. This feature significantly improves traction on slopes and uneven terrains, enabling users to maintain control over the mower, particularly in challenging mowing conditions. The wheels are designed for durability and stability, ensuring that they can handle the rigors of regular use.

The ergonomic handle design on the Snapper 3317523BVE adds to the overall user experience, allowing for comfortable operation. The handle can be adjusted for height, accommodating users of various sizes and preferences, while also providing a folding mechanism for easy storage.

Snapper's patented SmartChoke technology simplifies the starting process, reducing the hassle often associated with traditional mowers. This technology ensures a reliable start every time, even in varying weather conditions.

Moreover, the Snapper 3317523BVE's robust build is complemented by a sturdy plastic housing that is resistant to rust and corrosion, ensuring longevity and maintaining the mower's appearance over time.

Overall, the Snapper 3317523BVE is engineered to provide a seamless and efficient mowing experience, combining power, durability, and user-friendly features. This mower is a testament to Snapper's commitment to quality in the lawn care industry, making it a reliable choice for homeowners looking to maintain their gardens with ease.
Top Page Image Contents