Snapper 1800, 2800, 500, 1700, 2700, 400 manual Snapper Models

Page 24

Operating the Tractor

Mower Deck Removal & Installation

50” Snapper Models

WARNING

Engage parking brake, disengage PTO, stop engine and remove key before attempting to install or remove the mower.

Muffler and surrounding areas may be hot.

Removing the Mower Deck

1.Park the tractor, fully lower the attachment lift, turn off the PTO, turn off the engine, remove the key, and engage the parking brake. If equipped, pivot the gauge wheels into sliding position (see Figure 11).

2.Place mower in the lowest cutting position using the mower height control.

3.Place the attachment lift in the highest position.

4.From left side of tractor, use the idler arm (F, Figure 14) to relieve belt tension. Remove the belt (E) from the PTO pulley.

5.Disconnect outside chain (D, Figure 14) from hanger

(C). Repeat on other side.

CAUTION

The muffler and surrounding areas may be hot.

6.Place the attachment lift in the lowest position.

7.Disconnect lift chain (B) from lift hook (A). Repeat on other side.

8.Turn the wheels straight ahead. Pull back on spring- loaded lever (B, Figure 15) and lift mower hitch off of the tractor brackets (A).

9.Turn wheels fully left, and slide mower deck out from under the right side of the tractor.

Installing the Mower Deck

NOTE: Perform mower installation on a hard, level sur- face such as a concrete floor.

1.Park the tractor, fully lower the attachment lift, turn off the PTO switch, turn off the engine, remove the key, and engage the parking brake. Turn the wheels fully to the left.

C

E

A

B

D

F

Figure 14. Mower Lift

 

A. Lift Hook

D. Outside Chain

B. Lift Chain, Inside

E. PTO Belt

C. Hanger

F. Idler Arm

A

B

Figure 15. Mower Hitch

A.Tractor Hitch Brackets

B.Spring-Loaded Lever

2.Place mower in the lowest cutting position using the mower height adjuster. Slide the mower deck under the right side of tractor so that the mower hitch is aligned with front tractor hitch (A, Figure 15).

3.See Figure 15. Turn wheels straight. Pull back on the spring-loaded lever (B) while lifting up on the mower hitch. Install the mower hitch onto tractor hitch brackets (A). When properly installed, the spring- loaded lever should seat fully underneath the brack- ets (A).

4.Connect the lift chains (B, Figure 14) to the the trac- tor lift hooks (A).

5.Place the attachment lift in the highest position.

6.Connect outside chains (D, Figure 14) to hanger (C).

7.From left side of tractor, use the idler arm (F, Figure 14) to relieve belt tension. Install belt (E) onto the PTO pulley.

8.If equipped, raise the attachment lift and rotate the front gauge wheels (Figure 11) into cutting position.

22

Page 23 Page 25
Image 24
Page 23 Page 25
Contents 23HP Hydro Tractors Mower Decks 25HP Hydro Tractors Mower DecksMfg. No Description Mfg. No. DescriptionPage Table of Contents Safety Rules & Information Operating Safety Safety Rules and Information Slope OperationSafety Rules & Information General OperationIgnition System Service & Maintenance Safe Handling of GasolineIdentification Numbers CE Identification Tag MarkingsTractor ID Tag Mower ID Tag Safety Decals Safety DecalsDecal Ignition Switch Positions Decal Cutting Height Decal Transmission ReleaseCE Safety Icons Safety IconsControl Functions Throttle ControlChoke HeadlightsFeatures & Controls What is Automatic Controlled Traction? Parking Brake FunctionAutomatic Controlled Traction Attachment Lift Control LeverVolt Power Outlet Dashboard Display & FunctionsDisplay Items FunctionsGeneral Operating Safety Operational Safety ChecksAdding Fuel Operating the Tractor Starting the EngineStopping the Tractor & Engine Driving The TractorMowing Mowing in ReverseAttachment Operation in Reverse Adjusting Mower Cutting Height Pushing the Tractor by HandMower Deck Removal & Installation Installing the Mower DeckSimplicity, Massey Ferguson or Agco Models Removing the Mower DeckSnapper Models Upper Hanger Upper Hole Lift Hook Lower Hole Long HubSimplicity, Massey Ferguson and Agco Models Pivoting Gauge Wheels Select ModelsMower Hitch Tractor Hitch Brackets Spring-Loaded Lever Snapper Models Attaching a Trailer StorageLift Variations When Using Attachments Hydraulic Lift ModelsManual Lift Models How and When to Water Fertilize & AerateHow High To Mow the Grass Tall Grass Requires Incremental CuttingWhen and How Often to Mow Lawn Care & Mowing InformationProper Mowing Speed Regular Maintenance Before Every Spring Each Hours 100 250 Fall UseRegular Maintenance Battery Maintenance Cleaning the Battery and CablesCheck Tire Pressures SizeLubrication GreaseOil Lubricate Rear Axle Shafts Conquest / 1700 / 2700 / 400 / YTServicing the Mower Blabes Blade RemovalTransmission Maintenance K66 MaintenanceTransmission Identification Transmission Oil Capacity Apx .6 qt 2.5LK71 Maintenance Service Interval Every 5 HoursService Interval After 50 Hrs, Then Every 250 Hrs Transmission Oil Capacity Apx -1/2 qt 4.25LInternal Transmission Filter Service Filter Access Cap Troubleshooting Adjustment, & Service TroubleshootingTroubleshooting, Adjustment, & Service Tractor TroubleshootingBattery Charging Seat AdjustmentManual Lift Assist Adjustment Steering Wheel Adjustment Steering Gear AdjustmentBrake Adjustment Thicker Spoke Faces SeatPTO clutch adjustment Mower AdjustmentsTransport Height & Ground Following Adjustment Select Models Gauge Wheels Select ModelsLeveling The Mower Leveling The Mower Side-to-Side, J-Hook Models LocknutMower Belt Replacement 44 & 50 PTO Belt ReplacementTo avoid damaging belts, do not PRY GapArbor Drive Belt Replacement 25 HP* Kohler 23 HP* Briggs & StrattonK71 K66Replacement Parts Maintenance ItemsOptional Accessories Technical ManualsPage Page
Top Page Image Contents