Snapper Essential Maintenance Guidelines for Lawn Mower Transmission Repair

Page 28

Maintenance

!

WARNING

!

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. DO NOT attempt to service or charge the battery while it is installed on the machine.

Battery Service -

Valve Regulated Type

The battery provided with your unit is sealed and mainte- nance-free. It requires no special care other than keeping it properly charged.

How To Remove The Battery

How To Charge The Battery

1.Remove the battery. Refer to “How To Remove The Battery”.

2.Place the battery in a well-ventilated area.

3.Connect a 12-volt constant-voltagebattery charger to the battery terminals; RED to positive (+) and BLACK to negative (-) terminal.

4.Charge the battery for 2 to 4 hours.

!

WARNING

!

The battery on this unit requires the use of a constant voltage (CV) battery charger designed for valve regulated (sealed) non-spillable batteries. Attempting to use a standard battery charger may result in damage to the battery. DO NOT use “BOOST” chargers on the battery. DO NOT attempt to charge the battery while installed on the unit.

1. Raise the operator seat to gain access to the battery

 

How To Install The Battery

 

 

compartment.

 

 

 

 

 

 

2. Disconnect the BLACK (Negative) cable (A, Figure 33)

1.

Raise the operator seat.

 

 

 

 

 

Reproduction

 

 

from the negative battery terminal. Retain the mounting

2.

Install the battery (E, Figure 33) into the battery compart-

 

hardware.

 

 

 

 

 

 

ment, orientating it in the wireform (D) as shown.

 

 

 

 

 

 

 

3.

Secure the battery with the battery strap (C), hooking the

!

WARNING

 

!

4.

loose end onto the wireform.

 

 

Connect the RED positive (+) cables (B) to the positive

Always disconnect the BLACK negative (-) cable first.

 

 

terminal (+) the battery with the removed hardware.

 

 

 

 

 

for

5.

Connect the black negative (-) cable (A) to the negative

3. Disconnect the RED (Positive) cables (B) from the posi-

 

 

terminal (-)

the battery with the removed hardware.

 

tive battery terminal. Retain the mounting hardware.

 

 

!

WARNING

!

4. Unhook one end of the battery strap (C) from the wire-

 

 

 

form (D).

 

Not

 

 

Always connect the BLACK negative (-) cable last.

 

5. Carefully remove the battery (E).

 

 

 

 

 

 

 

 

 

 

 

 

 

6.

Apply a small amount of grease over the terminals to

 

 

 

 

E

 

7.

prevent corrosion.

 

 

 

B

 

A

Reinstall the positive terminal cover (F) over the positive

 

F

 

 

 

 

terminal.

 

 

 

 

 

 

 

 

 

!

WARNING

!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Always shield the positive terminal with the positive terminal

 

 

 

 

 

 

 

cover.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

 

How To Store The Battery

 

 

 

 

 

 

 

 

If the unit is to be stored out of season, it is recommended

D

the battery be removed, charged and stored.

1.

Remove the battery. Refer to “How To Remove The

 

2.

Battery”.

 

Charge the battery. Refer to “How To Charge The

Figure 33: Battery (valve regulated type)

3.

Battery”.

Store the battery in an area away from the unit on a

 

 

wood surface. DO NOT STORE THE BATTERY ON A

 

 

CONCRETE SURFACE.

28

www.snapper.com

Image 28
Contents Reproduction Not ForNot Table of Contents Operator Safety Operating Safety Not OrfRead the Manual ChildrenC il renReproductioReversenFuel and MaintenanceReproduction Thrown Objects Operator Safety Slope OperationMoving Parts Protection Against Tip-Overs/Roll-Overs Operator SafetyProtection for Children Operation PreparationSafe Handling of Gasoline Maintenance TowingFor Safety and Instructional Decals Reproduction ForExplanation of Safety Decals Explanation of Instructional DecalsFor Not Features and Controls Features and ControlsHow To Check/Add Oil OperationBefore Starting Before adding or checking the oilHow To Add Fuel How To Adjust The Operator SeatFuel Recommendations How To Start The Engine How To Engage The Mower Blade ForwardMower Blade EngineTransmission How To Set The Parking Brake Reverse Mowing Option RMO DeflectorRepr Oduction How To Push The Unit By HandTowing Implements Maintanance Chart MaintenanceEmissions Control How To Change The Oil Filter if EquippedHow To Service The Air Filter NotBFlat Air Filter Oval Air FilterRider Maintenance Basic Rider Maintenance Advanced How To Service The Fuel FilterHow To Check The Mower Blade How To Check The Mower Drive BeltsHow To Lubricate Grease Fittings How To Lubricate Differential / ChainHow To Lubricate Mower Blade Spindle How To Lubricate Mower Deck LinkageBattery Service Sealed Lead Acid Type How To Remove The Battery How To Charge The BatteryHow To Install The Battery How To Store The BatteryBattery Service Valve Regulated Type Battery valve regulated typeFuel System StorageBriggs & Stratton Fresh Start available in a drip con Engine Adjustments and Repairs Rider Adjustments And RepairsHow To Sharpen The Mower Blade How To Inspect The Mower BladeHow To Level The Mower Deck Reproduction BRepair Side-To-Side LevelingHow To Adjust The Brake / Parking Brake How To Adjust Mower Blade Belt TensionManual Drive Models Hydro Drive ModelsHow To Adjust The Blade Brake How To Remove The Deck Cover Troubleshooting Problem Probable Cause Corrective ActionTroubleshooting Limited Warranty WarrantiesBriggs & Stratton Emissions Control Warranty Provisions Page Page 4.5 / 1,6 7,2 0 / 0 8,0

7800918-00, 7800920-00, 7800932-00 specifications

The Snapper 7800920-00, 7800918-00, and 7800932-00 represent a series of high-performance mowers designed for both residential and commercial use. These models leverage advanced technologies and engineering, making them some of the most reliable and efficient choices on the market for lawn care enthusiasts and professionals alike.

One of the standout features of the Snapper 7800 series is their powerful engine options. Most models in this range are equipped with reliable Briggs & Stratton engines, known for their durability and easy starting capabilities. This ensures that users can tackle tough mowing jobs with confidence, whether dealing with thick grass, uneven terrain, or large lawns.

The cutting deck of these mowers is another significant highlight. The Snapper 7800920-00 features a 21-inch steel cutting deck that provides a clean and even cut, improving the overall appearance of your lawn. The other models, 7800918-00 and 7800932-00, offer a similar design with slight variations suited for different mowing needs. The adjustable cutting height allows users to customize the lawn cut based on personal preferences or seasonal requirements.

In terms of usability, these mowers come with ergonomic handles designed for comfort during prolonged use. The handles are often adjustable, catering to different user heights and improving maneuverability across various lawn types. The self-propelled feature, present in many models, allows easy navigation across slopes or uneven ground, making these mowers suitable for a variety of landscapes.

Snapper also integrates innovative technologies that enhance operational efficiency. Features such as efficient bagging systems allow for easy grass collection while reducing the need for raking afterward. The mulching capability, prevalent in these models, provides an eco-friendly solution by returning grass clippings to the lawn, promoting healthier growth.

Safety is another priority with Snapper's design ethos. These mowers are equipped with safety features such as blade brake systems and easily accessible controls that ensure users can operate the machines safely and effectively.

In conclusion, the Snapper 7800920-00, 7800918-00, and 7800932-00 incorporate advanced engineering, powerful performance, and user-friendly features that cater to the needs of both casual lawn caretakers and professional landscapers. With their strong build quality, reliability, and array of capabilities, these models stand out as excellent investments for maintaining pristine outdoor spaces.