Snapper 7800918-00, 7800932-00, 7800920-00 manual Troubleshooting

Page 35

 

 

 

 

Troubleshooting

 

 

 

 

 

 

PROBLEM

PROBABLE CAUSE

CORRECTIVE ACTION

Rider Will Not

1. Drive disc worn or damaged.

1.

Replace drive disc. Contact authorized dealer.

 

Move Or Loss

 

 

 

 

2. Rubber drive disc is not tracking properly on

2.

Adjust rubber drive disc. Contact authorized dealer.

of Traction

drive disc.

 

 

 

(Manual Drive

 

 

 

 

 

Models)

3. Tapered axle bolt and nut missing.

3.

Contact authorized dealer.

 

 

4.

Axle bearing seized.

4.

Contact authorized dealer.

 

 

5.

Insufficient lubrication in chain case or

5.

Contact authorized dealer.

 

 

transmission/differential.

 

 

 

Rider Will Not

1. Drive belt slipping or broken.

1.

Contact authorized dealer.

 

Move Or Loss

 

 

 

 

2. Transmission problem.

2.

Contact authorized dealer.

of Traction

 

 

 

 

 

(Hydro Drive

 

 

 

 

 

Models)

 

 

 

 

 

Blade(s) Not

1. Blade control in the OFF position.

1.

Move blade control to the ON position.

 

Cutting

 

 

 

 

2. Mower belt slipping.

2.

Adjust or replace mower belt. Contact authorized

 

 

 

dealer.

 

 

3.

Cutting blade is dull, worn or damaged.

3.

Sharpen or replace cutting blade.

 

Cutting Grass

1. Uneven tire pressure.

1.

Check tire pressure and adjust as needed.

 

Improperly

 

 

 

 

 

 

2.

Cutting height too low or high.

2.

Adjust cutting height.

 

 

3.

Engine speed too slow.

3.

Move engine speed control to FAST position.

 

 

4.

Forward ground speed too fast.

4.

Adjust unit to a slower ground speed.

 

 

5.

Terraced cut, side to side.

5.

Adjust side to side leveling.

 

 

6.

Excessive deck pitch, front to rear.

6.

Adjust front to rear leveling.

 

 

7.

Cutting blade(s) dull or damaged.

7.

Sharpen cutting edges or replace blade(s).

 

 

8.

Mower belt slipping.

8.

Adjust tension or replace mower belt. Contact

 

 

 

 

authorized dealer.

 

Poor Grass

1. Engine speed too slow.

1.

Move engine speed control to FAST position.

 

Discharge

 

 

 

 

2. Forward ground speed too fast.

2.

Adjust unit to a slower ground speed.

 

3.

Grass is wet.

3.

Mow when grass is dry.

 

 

4.

Excessively dull, worn or damaged blade(s).

4.

Service mower blade.

 

 

5.

Build up of grass clippings and debris under

5.

Clean the underside of deck.

 

 

deck.

 

 

 

 

6.

Improper blade installed on deck.

6.

Install proper blades.

 

Oil Leaking

1. Leaking chain case or differential plugs.

1.

Verify plugs are not cracked & are in good shape.

 

 

 

 

Check gaskets.

 

 

2.

Leaking engine block.

2.

Contact authorized dealer.

 

en

35

Image 35
Contents Not For ReproductionNot Table of Contents ChildrenC il renReproductioReversen Operator Safety Operating SafetyNot Orf Read the ManualMoving Parts Operator Safety Slope OperationFuel and MaintenanceReproduction Thrown Objects Protection for Children Operator SafetyProtection Against Tip-Overs/Roll-Overs Safe Handling of Gasoline PreparationOperation Towing MaintenanceFor Reproduction For Safety and Instructional DecalsExplanation of Instructional Decals Explanation of Safety DecalsFor Not Features and Controls Features and ControlsBefore adding or checking the oil How To Check/Add OilOperation Before StartingFuel Recommendations How To Adjust The Operator SeatHow To Add Fuel How To Start The Engine Forward How To Engage The Mower BladeTransmission EngineMower Blade Deflector How To Set The Parking Brake Reverse Mowing Option RMOTowing Implements How To Push The Unit By HandRepr Oduction Emissions Control MaintenanceMaintanance Chart Equipped How To Change The Oil Filter ifOval Air Filter How To Service The Air FilterNotB Flat Air FilterRider Maintenance Basic How To Check The Mower Drive Belts Rider Maintenance AdvancedHow To Service The Fuel Filter How To Check The Mower BladeHow To Lubricate Mower Deck Linkage How To Lubricate Grease FittingsHow To Lubricate Differential / Chain How To Lubricate Mower Blade SpindleHow To Store The Battery Battery Service Sealed Lead Acid TypeHow To Remove The Battery How To Charge The Battery How To Install The BatteryBattery valve regulated type Battery Service Valve Regulated TypeBriggs & Stratton Fresh Start available in a drip con StorageFuel System How To Inspect The Mower Blade Engine Adjustments and RepairsRider Adjustments And Repairs How To Sharpen The Mower BladeSide-To-Side Leveling How To Level The Mower DeckReproduction B RepairHydro Drive Models How To Adjust The Brake / Parking BrakeHow To Adjust Mower Blade Belt Tension Manual Drive ModelsHow To Adjust The Blade Brake How To Remove The Deck Cover Problem Probable Cause Corrective Action TroubleshootingTroubleshooting Warranties Limited WarrantyBriggs & Stratton Emissions Control Warranty Provisions Page Page 4.5 / 1,6 7,2 0 / 0 8,0

7800918-00, 7800920-00, 7800932-00 specifications

The Snapper 7800920-00, 7800918-00, and 7800932-00 represent a series of high-performance mowers designed for both residential and commercial use. These models leverage advanced technologies and engineering, making them some of the most reliable and efficient choices on the market for lawn care enthusiasts and professionals alike.

One of the standout features of the Snapper 7800 series is their powerful engine options. Most models in this range are equipped with reliable Briggs & Stratton engines, known for their durability and easy starting capabilities. This ensures that users can tackle tough mowing jobs with confidence, whether dealing with thick grass, uneven terrain, or large lawns.

The cutting deck of these mowers is another significant highlight. The Snapper 7800920-00 features a 21-inch steel cutting deck that provides a clean and even cut, improving the overall appearance of your lawn. The other models, 7800918-00 and 7800932-00, offer a similar design with slight variations suited for different mowing needs. The adjustable cutting height allows users to customize the lawn cut based on personal preferences or seasonal requirements.

In terms of usability, these mowers come with ergonomic handles designed for comfort during prolonged use. The handles are often adjustable, catering to different user heights and improving maneuverability across various lawn types. The self-propelled feature, present in many models, allows easy navigation across slopes or uneven ground, making these mowers suitable for a variety of landscapes.

Snapper also integrates innovative technologies that enhance operational efficiency. Features such as efficient bagging systems allow for easy grass collection while reducing the need for raking afterward. The mulching capability, prevalent in these models, provides an eco-friendly solution by returning grass clippings to the lawn, promoting healthier growth.

Safety is another priority with Snapper's design ethos. These mowers are equipped with safety features such as blade brake systems and easily accessible controls that ensure users can operate the machines safely and effectively.

In conclusion, the Snapper 7800920-00, 7800918-00, and 7800932-00 incorporate advanced engineering, powerful performance, and user-friendly features that cater to the needs of both casual lawn caretakers and professional landscapers. With their strong build quality, reliability, and array of capabilities, these models stand out as excellent investments for maintaining pristine outdoor spaces.