Snapper EP2167517BV, ERP2167517BV Maintenance, Introduction Check Grease Level in Transmission

Page 10

Section 3 – MAINTENANCE

3.1

INTRODUCTION

3.2.2. CHECK GREASE LEVEL IN TRANSMISSION

 

To retain the quality of the mower, use genuine

1. Remove transmission fill plug. Roll machine

 

SNAPPER replacement parts only. Contact a local

forward or backward while looking down into plug

 

SNAPPER dealer for parts and service assistance.

hole.

 

For the correct part or information for a particular

2. If liquid grease IS NOT visible on the input gear

 

mower, always mention model and serial number.

(the small gear below the plug hole), add an

3.2

SERVICE - AFTER FIRST 5 HOURS

amount, to cover gear, of Snapper “00” grease. See

Figure 3.2.

 

3.2.1. CHANGE ENGINE OIL

 

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

1.Refer to Engine Manual for proper oil specifications and procedures.

2.For simplest/cleanest oil change, loosen lower handle wing nuts and stand mower up on lower handle as shown in Figure 3.1. Drain oil through dipstick tube into a container.

FIGURE 3.1

IMPORTANT: Drain fuel tank before tipping mower.

FILL PLUG

FIGURE 3.2

NOTE: Snapper “00” Grease (Part No. 2-9443) is available at your SNAPPER dealer.

(Continued on Next Page)

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents European 21 Steel Deck Walk Mowers Series Model Number ExplanationSlope Operation Protection for ChildrenPreparation Maintenance and Storage OperationTable of Contents Familiarization Introduction NomenclaturePRE-START Check List Operating InstructionsStarting & Operation 2.2.1. Engine & Blade Primer Models Propelling Mower Cutting Height AdjustmentHandle Height Adjustment Self Propelled Models OnlySecure Adapter To Deck with Nuts Nuts Introduction Check Grease Level in Transmission MaintenanceService After First 5 Hours Change Engine OILCheck Mower Blade Service AnnuallyStorage Procedure Check Engine Drive BeltBlade Sharpening Repair & AdjustmentsMower Blade Replacement 4.1.1. Standard Blade Wear Limit 1.A. Ninja Blade Wear LimitWheel Drive Control Adjustment Cleaning Drive Disc & Driven Disc Driven and Drive Disc ServiceDriven Disc Adjustment Drive Spring Repair/ReplacementReplacing Rubber Driven Disc Drive Disc Assembly Install NEW Driven Disc Snap Rings Belt Service Pulley Position Troubleshooting Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed EachClean Sponge Element Engine Manual 100Decal Identification European Performance Year Limited Warranty Disclaimer of WarrantyEuropean Steel Deck Walk Behind Mowers Series

EP2167517BV, ERP2167517BV specifications

The Snapper EP2167517BV, also known as ERP2167517BV, is a powerful and reliable product designed for efficiency and durability in various applications. Engineered with precision, this model stands out for its assortment of features, innovative technologies, and robust characteristics.

One of the primary features of the Snapper EP2167517BV is its advanced engine technology. This model is equipped with a high-performance engine that provides optimal power output, enabling smooth operation even under heavy loads. The engine's efficiency not only contributes to a reduction in fuel consumption but also ensures minimal emissions, making it environmentally friendly.

The Snapper EP2167517BV also boasts a user-friendly design, combining ergonomics with functionality. The control panel is intuitively laid out, allowing operators to easily navigate through various functions. Adjustable handles provide users with enhanced comfort during operation, reducing fatigue during extended periods of use. The overall construction of the equipment is robust, built to withstand the rigors of demanding work environments.

Another noteworthy technology incorporated in the Snapper EP2167517BV is the advanced cutting system. This system allows for precise and uniform cutting, ensuring that tasks are completed efficiently and effectively. The sharp blades are crafted from high-quality materials, promoting longevity and performance over time. The model’s cutting height can be easily adjusted to accommodate different grass lengths, providing versatility for various landscaping tasks.

Durability is a cornerstone of the Snapper EP2167517BV’s design. Constructed from premium materials, this model is designed to endure harsh conditions and heavy usage. The robust frame reinforces its stability, while the rust-resistant components ensure longevity, reducing the need for frequent replacements or repairs.

In terms of maintenance, the Snapper EP2167517BV simplifies the upkeep process. Its easily accessible components allow for straightforward servicing, promoting optimal performance and extending the lifespan of the product. Additionally, the manufacturer provides comprehensive support and guidance, making it easier for users to maintain their equipment in peak condition.

In summary, the Snapper EP2167517BV, or ERP2167517BV, is a high-performance product characterized by its advanced engine technology, user-friendly design, efficient cutting system, and durable construction. These features collectively elevate its capability, making it an ideal choice for both professional landscapers and homeowners alike. Whether tackling tough jobs or maintaining aesthetics, this model delivers exceptional results and reliability.
Top Page Image Contents