Snapper EP2167517BV, ERP2167517BV Replacing Rubber Driven Disc, On Next

Page 15

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3.3. DRIVEN DISC ADJUSTMENT (Continued From Previous Page)

2.Remove driven disc spring from driven disc assembly. Loosen connector hex nut. See Figure 4.9.

DRIVEN DISC

ASSEMBLY

DRIVE

DISC

DRIVEN DISC

SPRING

TRANSFER

ROD

CONNECTOR

CONNECTOR

HEX NUT

FIGURE 4.9

3.Slide driven disc assembly over to 1/8” from outside edge of drive disc. Maintaining the 1/8” measurement, remove any looseness from the linkage. This can be done by holding the transfer rod and applying pressure to the left (as viewed from operators position). Then retighten the connector hex nut securely. See Figure 4.10. Move ground speed control to the first speed position, then back to the sixth speed position. Recheck the 1/8” measurement described previously. Reinstall driven disc spring to driven disc assembly.

1/8” MEASUREMENT TO OUTSIDE EDGE OF DRIVE DISC

DRIVE

SLIDE DRIVENDISC DISC ASSEMBLY

TOWARD OUTSIDE EDGE

TRANSFER

ROD

CONNECTOR

HEX NUTOUTSIDE EDGE

CONNECTOR

FIGURE 4.10

4.3.4. Replacing Rubber Driven Disc

If the rubber is badly chunked or worn it must be replaced. Install new Driven Disc as follows:

1.Using a small flat blade screwdriver, free the clip from the transfer rod. Then remove the transfer rod from the clip and the speed control rod. See Figure

CONNECTOR

CLIP

TRANSFER

ROD

SPEED CONTROL

ROD

FIGURE 4.11

(Continued On Next Page)

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model Number Explanation European 21 Steel Deck Walk Mowers SeriesProtection for Children Slope OperationPreparation Operation Maintenance and StorageTable of Contents Introduction Nomenclature FamiliarizationOperating Instructions PRE-START Check ListStarting & Operation 2.2.1. Engine & Blade Primer Models Self Propelled Models Only Cutting Height AdjustmentHandle Height Adjustment Propelling MowerSecure Adapter To Deck with Nuts Nuts Change Engine OIL MaintenanceService After First 5 Hours Introduction Check Grease Level in TransmissionCheck Engine Drive Belt Service AnnuallyStorage Procedure Check Mower Blade1.A. Ninja Blade Wear Limit Repair & AdjustmentsMower Blade Replacement 4.1.1. Standard Blade Wear Limit Blade SharpeningWheel Drive Control Adjustment Drive Spring Repair/Replacement Driven and Drive Disc ServiceDriven Disc Adjustment Cleaning Drive Disc & Driven DiscReplacing Rubber Driven Disc Drive Disc Assembly Install NEW Driven Disc Snap Rings Belt Service Pulley Position Problem Probable Cause Corrective Action Troubleshooting100 Service Performed EachClean Sponge Element Engine Manual MAINTENANCE/REPLACEMENT PartsDecal Identification European Performance Disclaimer of Warranty Year Limited WarrantyEuropean Steel Deck Walk Behind Mowers Series

EP2167517BV, ERP2167517BV specifications

The Snapper EP2167517BV, also known as ERP2167517BV, is a powerful and reliable product designed for efficiency and durability in various applications. Engineered with precision, this model stands out for its assortment of features, innovative technologies, and robust characteristics.

One of the primary features of the Snapper EP2167517BV is its advanced engine technology. This model is equipped with a high-performance engine that provides optimal power output, enabling smooth operation even under heavy loads. The engine's efficiency not only contributes to a reduction in fuel consumption but also ensures minimal emissions, making it environmentally friendly.

The Snapper EP2167517BV also boasts a user-friendly design, combining ergonomics with functionality. The control panel is intuitively laid out, allowing operators to easily navigate through various functions. Adjustable handles provide users with enhanced comfort during operation, reducing fatigue during extended periods of use. The overall construction of the equipment is robust, built to withstand the rigors of demanding work environments.

Another noteworthy technology incorporated in the Snapper EP2167517BV is the advanced cutting system. This system allows for precise and uniform cutting, ensuring that tasks are completed efficiently and effectively. The sharp blades are crafted from high-quality materials, promoting longevity and performance over time. The model’s cutting height can be easily adjusted to accommodate different grass lengths, providing versatility for various landscaping tasks.

Durability is a cornerstone of the Snapper EP2167517BV’s design. Constructed from premium materials, this model is designed to endure harsh conditions and heavy usage. The robust frame reinforces its stability, while the rust-resistant components ensure longevity, reducing the need for frequent replacements or repairs.

In terms of maintenance, the Snapper EP2167517BV simplifies the upkeep process. Its easily accessible components allow for straightforward servicing, promoting optimal performance and extending the lifespan of the product. Additionally, the manufacturer provides comprehensive support and guidance, making it easier for users to maintain their equipment in peak condition.

In summary, the Snapper EP2167517BV, or ERP2167517BV, is a high-performance product characterized by its advanced engine technology, user-friendly design, efficient cutting system, and durable construction. These features collectively elevate its capability, making it an ideal choice for both professional landscapers and homeowners alike. Whether tackling tough jobs or maintaining aesthetics, this model delivers exceptional results and reliability.
Top Page Image Contents