1. Refrigerant Recovery

This icemaker is provided with refrigerant access valves. Using proper refrigerant practices, recover the refrigerant from the service valves and store it in an approved container. Do not discharge the refrigerant into the atmosphere.

2. Brazing

WARNING

•R-404A itself is not flammable at atmospheric pressure and temperatures up to

176°F (80°C).

•R-404A itself is not explosive or poisonous. However, when exposed to high temperatures (open flames), R-404A can be decomposed to form hydrofluoric acid and carbonyl fluoride both of which are hazardous.

•Do not use silver alloy or copper alloy containing arsenic.

•Use an electronic leak detector or soap bubbles to check for leaks. Add a trace of refrigerant to the system (if using an electronic leak detector), and then raise the pressure using nitrogen gas (140 PSIG). DO NOT use R-404A as a mixture with pressurized air for leak testing.

1)Braze all fittings while purging with nitrogen gas flowing at a pressure of 3 to 4 PSIG.

NOTICE

•Always install a new drier every time the sealed refrigeration system is opened.

•Do not replace the drier until after all other repair or replacement has been made.

Install the new drier with the arrow on the drier in the direction of the refrigerant flow.

•When brazing, protect the drier by using a wet cloth to prevent the drier from overheating. Do not allow the drier to exceed 250°F (121°C).

2)Use an electronic leak detector or soap bubbles to check for leaks. Add a trace of refrigerant to the system (if using an electronic leak detector), and then raise the pressure using nitrogen gas (140 PSIG). DO NOT use R-404A as a mixture with pressurized air for leak testing.

3.Evacuation and Recharge (R-404A)

1)Attach a vacuum pump to the system. Be sure to connect charging hoses to both high and low-side access valves.

IMPORTANT

The vacuum level and vacuum pump may be the same as those for current refrigerants. However, the rubber hose and gauge manifold to be used for evacuation and refrigerant charge should be exclusively for POE oils.

2)Turn on the vacuum pump. Open the gauge manifold valves. Never allow the oil in the vacuum pump to flow backwards.

3)Allow the vacuum pump to pull down to a 29.9" Hg vacuum. Evacuating period depends on pump capacity.

39

Page 38 Page 40
Page 39
Image 39
Hoshizaki DCM 300BAH(-OS) service manual Refrigerant Recovery, Brazing, Evacuation and Recharge R-404A
Page 38 Page 40

DCM 300BAH(-OS) specifications

The Hoshizaki DCM 300BAH(-OS) is a high-performance ice and water dispenser designed to meet the demands of various commercial environments. Known for its reliability and efficiency, this machine is widely used in restaurants, hotels, and catering services where a continuous supply of ice is essential.

One of the standout features of the DCM 300BAH(-OS) is its ability to produce crescent-shaped ice, which is favored in many settings for its hardness and slow-melting properties. This type of ice helps maintain the temperature of beverages longer without diluting them too quickly, making it ideal for mixed drinks and soft drinks alike.

Technology-wise, the Hoshizaki DCM 300BAH(-OS) integrates advanced refrigeration components that enhance energy efficiency. The machine is designed with a patented cooling system that reduces energy consumption while maintaining optimal ice production. Moreover, it is equipped with a highly efficient compressor that ensures quick recovery times even during peak usage.

One characteristic that sets this model apart is its space-saving design. With a footprint that allows for easy placement in tight quarters, it is particularly suited for establishments with limited counter space. The sleek and contemporary exterior also means it complements a variety of decor styles, making it a versatile addition to any commercial kitchen or bar.

The unit boasts a user-friendly interface, with easy-to-read indicators for ice and water levels, allowing staff to manage operations seamlessly. Additionally, the DCM 300BAH(-OS) features a self-cleaning cycle, which automates the sanitation process to ensure the utmost hygiene standards are maintained. This feature not only saves time but also enhances the longevity of the unit by reducing wear and tear.

Its durable construction is another strong point. Built from high-quality stainless steel, the DCM 300BAH(-OS) is resistant to corrosion and wear, ensuring it can withstand the rigors of daily use. Furthermore, Hoshizaki products are renowned for their reliability, and this model upholds that reputation, providing consistent performance with minimal downtime.

In summary, the Hoshizaki DCM 300BAH(-OS) stands out for its efficient ice production, innovative technology, space-saving design, user-friendly features, and robust durability, making it an ideal choice for any business that requires a reliable ice and water dispensing solution.
Top Page Image Contents