Snapper LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV Reverse Lockout Mechanism

Page 11

Section 2 - OPERATING INSTRUCTIONS

2.7. REVERSE LOCKOUT MECHANISM

Data indicates that tragic back-over accidents occur each year. These accidents usually involve unsupervised children. Many times these children have been given rides on the machine and have been trained to view this potentially dangerous piece of machinery as fun rather than being taught how to avoid danger.

This riding mower has a Reverse Lockout Mechanism. This mechanism prevents the mower from being shifted into reverse with the blades running. To shift into reverse you must first stop the blades and then shift to reverse. It is our recommendation that this mechanism remain functional and the operator of this equipment develop the habit of never backing up with the blades running. As the Safety Instructions Indicate, DO NOT operate blades in reverse. STOP BLADES, LOOK AND SEE BEHIND AND DOWN for children, pets and hazards before and while backing.

We realize that this could cause a change to your previous mowing method but we encourage you to adjust to this new system. Do not defeat the Reverse Lockout Mechanism.

If you operate your mower near roadways or use attachments that require quicker shifting to reverse, there is an override lever provided. This lever can be pushed and held before starting the blades and will allow reverse operation until the blade engagement lever is moved to the “OFF” position, at which time the system will return to its Reverse Lockout mode. This feature should never be selected unless you are absolutely sure that no children or others are present in the mowing area and that all children are away and supervised by a responsible adult.

2.7.1.Reverse Lockout Mechanism Override

1.Stop machine. Stop blades.

2.Depress and hold Override Lever.

3.Raise blade engagement lever to "ON".

4.Release override lever.

WARNING

LOOK and SEE behind and down for children, pets and hazards before and while backing.

IMPORTANT! DO NOT use the Reverse Lockout Mechanism Override as the normal operating mode. To return to the Reverse Lockout Mechanism mode, move the blade engagement lever down to the “OFF” position. The Override will reset to Reverse Lockout.

2.7.2.Check the Reverse Lockout Mechanism Before each use, check the Reverse Lockout Mechanism for proper function. Perform the following check with the engine “OFF”.

1.With engine “OFF”, raise blade engagement lever to "ON".

2.The Reverse Lockout Mechanism must prevent the speed control lever from going into reverse.

WARNING

DO NOT operate machine if Reverse Lockout Mechanism is not functioning properly. Contact your SNAPPER dealer immediately for assistance.

DANGER

LOOK and SEE behind and down for children, pets and hazards before and while backing.

BLADES must be turned off before backing machine. DO NOT allow children on machine (even with

blades off) or in yard when mowing.

12

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 150 Model Number ExplanationPreparation Protection for ChildrenProtection Against Tipovers Operation MaintenanceTable of Contents Controls ComponentsOPERATOR’S Seat Adjustment Front to Rear Adjustment PRE-START ChecklistOFF Starting & Operation Starting EngineStopping Wheel Drive Starting & Operation 2.3.2. Starting Wheel DriveStarting Mower Blade Releasing Park Brake Setting Park BrakeCutting Height Adjustment Stopping Stopping Mower BladeRolling Tractor with Engine OFF 2.6.1. Rolling Hydro Models Reverse Lockout Mechanism Override Reverse Lockout MechanismCheck Blade Brake Service After First 5 HoursIntroduction Change Engine OILCheck 38 Deck Drive Belt Service Every 25 Operating Hours Check EngineCheck Mower Blade Check 33 Deck Drive BeltTractor Lubrication Mower ComponentsService Annually Spark Plug Hydrostatic Transmission OIL Service Annually 3.4.2. Fuel FilterService Annually 3.4.2. Fuel Filter From Previous Deck Blade Brake Adjustment Engine Adjustments & RepairBlade Brake Adjustment On next Blade Belt Adjustment 33 DeckBlade Belt Adjustment 38 Deck Side View of Deck Adjusting Mower Blade 33 Deck from previousFrom previous Deck Level Adjustment Side to SideDeck Level Adjustment Front to Rear Sector Plates Deck Level Adjustment Front to Rear Front Lift RODFront of Tractor Rear to Front View of Deck Deck Level Adjustment Front to RearTractor Drive Components Brake Adjustment Shifter Adjustment Steering AdjustmentMounting Ninja Blade Sharpening Mower Blade Service Standard Blade Wear LimitsNinja Blade Wear Limits Standard Blade SharpeningTraction Drive Belt Replacement Mower Deck Removal Mower Blade ReplacementTraction drive belt removal View from Underneath Tractor Traction drive belt replacementDeck Drive Belt Battery Storage Battery Battery RemovalBattery Installation Battery ServiceNEW Battery Preparation Battery TestingAvailable LT150H33IBV LT150H38IBV Accessories Available AccessoriesLT150H33IBV & LT150H38IBV Schematic Wiring Harness P.NSchematic Wiring Harness P.N LT150H38HKV Problem Probable Cause Corrective Action Troubleshooting GuideTroubleshooting Guide WLT170H38IBV Tractor Drive Belts Mower BladesNinja WLT150H38IBVDisclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Service Notes Lawn Tractor Hydrostatic Drive Series

LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV, LT150H331BV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV specifications

The Snapper LT150H331BV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV, LT150H33IBV, and WLT170H38IBV are part of Snapper's robust lineup of lawn tractors designed for residential and commercial landscaping needs. These models are engineered for efficiency, durability, and comfort, making them perfect for tackling various mowing tasks.

One of the standout features across these models is the powerful engine options. Equipped with reliable Briggs & Stratton engines, these tractors provide ample horsepower to handle tough mowing conditions. The LT150H331BV and LT150H38IBV boast a 150cc engine that delivers dependable performance, while the WLT170H38IBV features a more powerful 170cc engine, allowing for increased cutting speeds and improved overall efficiency.

The cutting deck on these models varies, with sizes generally around 38 inches to 42 inches, offering a balance between maneuverability and cutting capacity. The mulching capability is another significant advantage, allowing homeowners to recycle grass clippings, which promotes healthier lawns. Many of these tractors also feature adjustable cutting height settings, providing versatility for different grass types and mowing conditions.

Ergonomics play a crucial role in user satisfaction, and Snapper has designed these models with comfortable padded seats and easy-to-reach controls. The availability of hydrostatic transmission in models like the WLT150H38IBV allows for smooth speed adjustments, enhancing the user experience during operation.

In terms of technology, these Snapper lawn tractors often incorporate smart cut technology, which automatically adjusts the engine speed based on the mowing conditions. This feature not only results in a cleaner cut but also aids in fuel efficiency. The compact design of these tractors ensures easier storage and maneuverability around landscaping obstacles.

Durability is at the forefront of Snapper’s construction, with heavy-duty steel frames and reinforced decks designed to withstand regular use. These models are also backed by Snapper's reputation for quality, ensuring users can rely on their performance for many seasons.

In summary, the Snapper LT150H331BV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV, LT150H33IBV, LT150H38IBV, and WLT170H38IBV offer a blend of power, comfort, and innovative features. Whether you are maintaining a small residential lawn or a larger area, these tractors provide the reliability and efficiency needed for effective lawn care.
Top Page Image Contents