Snapper LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV Troubleshooting Guide

Page 35

TROUBLESHOOTING GUIDE

(Continued From Previous Page)

PROBLEM

 

PROBABLE CAUSE

 

CORRECTIVE ACTION

Tractor Will Not

1. Speed control handle in the neutral “N”

1.

Place speed control in desired speed.

Move Or Loss Of

 

position.

 

 

Traction

 

 

 

 

 

2.

Roll release control in “ROLL” position.

2. Move roll release control to the engaged

 

 

 

 

position.

 

3.

Low transmission oil level.

3.

Bring oil to proper level.

 

4.

Shifter out of adjustment.

4.

Adjust shifter.

 

5.

Traction drive belt requires adjustment.

5.

Adjust traction drive belt.

 

6.

Traction drive belt requires replacement.

6.

Replace traction drive belt.

Blade(s) Not

1. Blade engagement switch in the “OFF”

1.

Move switch to the “ON” position.

Turning

 

position.

 

 

 

2.

Blade belt requires adjustment.

2.

Adjust mower belt.

 

3.

Blade belt requires replacement.

3.

Replace mower belt.

 

4.

Electric clutch not functioning.

4.

Contact authorized SNAPPER dealer.

Cutting Grass

1. Uneven tire pressure.

1.

Bring to proper pressure.

Improperly

 

 

 

 

 

2.

Cutting height too low or high.

2.

Adjust cutting height.

 

3.

Engine speed too slow.

3.

Move engine speed control to “FAST”.

 

4.

Forward speed too fast.

4.

Move speed control to a slower speed.

 

5.

Deck side to side level requires adjustment.

5.

Adjust side to side level.

 

6.

Deck front to rear level requires adjustment.

6.

Adjust front to rear level.

 

7.

Cutting Blade dull or damaged.

7.

Sharpen cutting edges or replace blade.

 

8.

Blade belt requires replacement.

8.

Replace blade belt.

 

9.

Blade belt slipping.

9.

Replace blade belt.

Poor Grass

1. Engine speed too slow.

1.

Move engine speed control to “FAST”.

Discharge

 

 

 

 

 

2.

Forward speed too fast.

2.

Move speed control to a slower speed.

 

3.

Grass is wet.

3.

Mow when grass is dry.

 

4.

Excessively worn or damaged blade(s).

4.

Service mower blade(s).

 

5.

Build up of grass clippings and debris under

5.

Clean deck.

 

 

deck.

 

 

 

6.

Improper blade(s) installed on deck.

6.

Install proper SNAPPER blades.

 

7.

Blade(s) installed improperly on deck.

7.

Install blades properly.

Battery Will Not

1. Poor cable connections.

1.

Clean cables and battery terminals.

Charge

 

 

 

 

 

2.

Bad battery cell(s).

2.

Replace with new battery.

 

3.

Faulty alternator.

3.

Contact engine manufacturer’s dealer.

Oil Leaking From

1. Loose or missing oil filler cap on

1.

Check oil level and re-install oil cap.

Transmission

 

transmission.

 

 

 

2.

Leaking axle seats.

2.

Contact authorized SNAPPER dealer.

 

3.

Leaking at casing seal.

3.

Contact authorized SNAPPER dealer.

36

Page 34 Page 36
Image 35
Page 34 Page 36
Contents 150 Model Number ExplanationPreparation Protection for ChildrenProtection Against Tipovers Operation MaintenanceTable of Contents Controls ComponentsOPERATOR’S Seat Adjustment Front to Rear Adjustment PRE-START ChecklistOFF Starting & Operation Starting EngineStopping Wheel Drive Starting & Operation 2.3.2. Starting Wheel DriveStarting Mower Blade Releasing Park Brake Setting Park BrakeCutting Height Adjustment Stopping Stopping Mower BladeRolling Tractor with Engine OFF 2.6.1. Rolling Hydro Models Reverse Lockout Mechanism Override Reverse Lockout MechanismCheck Blade Brake Service After First 5 HoursIntroduction Change Engine OILCheck 38 Deck Drive Belt Service Every 25 Operating Hours Check EngineCheck Mower Blade Check 33 Deck Drive BeltTractor Lubrication Mower ComponentsService Annually Spark Plug Hydrostatic Transmission OIL Service Annually 3.4.2. Fuel FilterService Annually 3.4.2. Fuel Filter From Previous Deck Blade Brake Adjustment Engine Adjustments & RepairBlade Brake Adjustment On next Blade Belt Adjustment 33 DeckBlade Belt Adjustment 38 Deck Side View of Deck Adjusting Mower Blade 33 Deck from previousFrom previous Deck Level Adjustment Side to SideDeck Level Adjustment Front to Rear Sector Plates Deck Level Adjustment Front to Rear Front Lift RODFront of Tractor Rear to Front View of Deck Deck Level Adjustment Front to RearTractor Drive Components Brake Adjustment Shifter Adjustment Steering AdjustmentMounting Ninja Blade Sharpening Mower Blade Service Standard Blade Wear LimitsNinja Blade Wear Limits Standard Blade SharpeningTraction Drive Belt Replacement Mower Deck Removal Mower Blade ReplacementTraction drive belt removal View from Underneath Tractor Traction drive belt replacementDeck Drive Belt Battery Storage Battery Battery RemovalBattery Installation Battery ServiceNEW Battery Preparation Battery TestingAvailable LT150H33IBV LT150H38IBV Accessories Available AccessoriesLT150H33IBV & LT150H38IBV Schematic Wiring Harness P.NSchematic Wiring Harness P.N LT150H38HKV Problem Probable Cause Corrective Action Troubleshooting GuideTroubleshooting Guide WLT170H38IBV Tractor Drive Belts Mower BladesNinja WLT150H38IBVDisclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Service Notes Lawn Tractor Hydrostatic Drive Series

LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV, LT150H331BV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV specifications

The Snapper LT150H331BV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV, LT150H33IBV, and WLT170H38IBV are part of Snapper's robust lineup of lawn tractors designed for residential and commercial landscaping needs. These models are engineered for efficiency, durability, and comfort, making them perfect for tackling various mowing tasks.

One of the standout features across these models is the powerful engine options. Equipped with reliable Briggs & Stratton engines, these tractors provide ample horsepower to handle tough mowing conditions. The LT150H331BV and LT150H38IBV boast a 150cc engine that delivers dependable performance, while the WLT170H38IBV features a more powerful 170cc engine, allowing for increased cutting speeds and improved overall efficiency.

The cutting deck on these models varies, with sizes generally around 38 inches to 42 inches, offering a balance between maneuverability and cutting capacity. The mulching capability is another significant advantage, allowing homeowners to recycle grass clippings, which promotes healthier lawns. Many of these tractors also feature adjustable cutting height settings, providing versatility for different grass types and mowing conditions.

Ergonomics play a crucial role in user satisfaction, and Snapper has designed these models with comfortable padded seats and easy-to-reach controls. The availability of hydrostatic transmission in models like the WLT150H38IBV allows for smooth speed adjustments, enhancing the user experience during operation.

In terms of technology, these Snapper lawn tractors often incorporate smart cut technology, which automatically adjusts the engine speed based on the mowing conditions. This feature not only results in a cleaner cut but also aids in fuel efficiency. The compact design of these tractors ensures easier storage and maneuverability around landscaping obstacles.

Durability is at the forefront of Snapper’s construction, with heavy-duty steel frames and reinforced decks designed to withstand regular use. These models are also backed by Snapper's reputation for quality, ensuring users can rely on their performance for many seasons.

In summary, the Snapper LT150H331BV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV, LT150H33IBV, LT150H38IBV, and WLT170H38IBV offer a blend of power, comfort, and innovative features. Whether you are maintaining a small residential lawn or a larger area, these tractors provide the reliability and efficiency needed for effective lawn care.
Top Page Image Contents