Snapper FRP216016 Driven Disc Service, Driven Disc Adjustment, Cleaning Drive Disc & Driven Disc

Page 13

Section 4 - REPAIR & ADJUSTMENTS

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3 DRIVEN DISC SERVICE

If the mower does not propel itself properly, See Figure 4.6. Check for the following problems:

USE NEEDLE NOSE PLIERS TO INSTALL DRIVE SPRING

DRIVEN DISC & RUBBER RING

DRIVE

SPRING

ENGINE

DRIVE

BELT

DRIVE

DISC

POLY-V BELT

DRIVE

SPRING

FIGURE 4.7

4.3.3. DRIVEN DISC ADJUSTMENT

If the drive disc and driven disc are clean and the mower drive is still slipping, adjust the driven disc as follows:

1.Place ground speed control in the number six speed position. See Figure 4.8.

FIGURE 4.6

1.Grease on drive disc causing slippage.

2.Broken or disconnected drive spring.

3.Driven disc is out of adjustment.

4.Driven disc rubber ring is worn - does not contact drive disc properly.

5.Worn Poly-V Belt or engine drive belt.

NOTE: If any of the above (1 thru 5) are causing problems, service as follows:

4.3.1. Cleaning Drive Disc & Driven Disc.

If oil or grease on the drive disc or driven disc is causing slippage, clean discs as follows:

1.Wipe away any oil or grease with a clean cloth.

2.Use either an approved grease solvent or hot, soapy water to clean drive disc or driven disc.

3.Rinse components with clean water.

4.Dry components with a clean cloth.

4.3.2. Drive Spring Repair/Replacement

If drive spring is loose, reconnect as shown in Figure 4.7. If spring is broken, replace with new spring.

IMPORTANT: If machine drive system continues slipping see Trouble Shooting section.

MOVE GROUND

REYCLING MODEL SHOWN

SPEED CONTROL TO

(ROPE START MOUNTED ON

SIX SPEED POSITION

RIGHT SIDE OF HANDLE)

 

SIXTH SPEED

POSITION

SIXTH

FIRST

FIRST SPEED

POSITION

 

FIGURE 4.8

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Steel Deck Walk Mowers Series Important Safety Instructions Operation Table of Contents Nomenclature IntroductionStarting & Operation 2.2.1. Engine & Blade PRE-START Check ListPrimer Models Handle Height Adjustment Cutting Height AdjustmentPropelling Mower StoppingInstallation of Grass Catcher Adjusting Front Deck BaffleRecycling Operation Models with an F prefix in model numberOn Next Service After First 5 Hours 3.2.1. Change Engine OILStorage Procedure Service AnnuallyCheck Mower Blade Check Engine Drive BeltBlade Sharpening Mower Blade Replacement 4.1.1. Standard Blade Wear Limit1A. Ninja Blade Wear Limit Wheel Drive Control Adjustment Driven Disc Adjustment Driven Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementReplacing Rubber Driven Disc Ring Replacing Rubber Driven Disc Ring From Previous Belt Service Drive Idler Pulley Differential Bracket Problem Probable Cause Corrective Action TroubleshootingClean Sponge Element Engine Manual Service Performed EachMAINTENANCE/REPLACEMENT Parts 100Disclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Steel Deck Walk Behind Mowers Series

FRP216016 specifications

The Snapper FRP216016 is a versatile and innovative lawn mower designed to enhance the efficiency of lawn care for both residential and commercial users. One of its standout features is the powerful 21-inch cutting deck, which is engineered to deliver a clean and precise cut across various types of grass and terrain. This size allows for optimum maneuverability, making it ideal for small to medium-sized lawns while still having the capacity to manage larger spaces effectively.

Equipped with a reliable 160cc engine, the FRP216016 ensures robust performance, enabling it to handle tough mowing conditions without compromising on power. This engine features advanced technology that not only provides ample torque but also promotes fuel efficiency, translating to longer run times and reduced operational costs.

The Snapper FRP216016 also incorporates the innovative SureCut technology, which enhances the cutting experience by preventing grass clumping, resulting in a well-manicured lawn. This unique design helps to disperse clippings more evenly, minimizing the need for additional clean-up after mowing.

Another key characteristic of the FRP216016 is its height adjustment feature, allowing users to customize the cut to their preference with ease. The mower offers multiple cutting height positions, accommodating various grass types and seasonal preferences. This flexibility is crucial for achieving the perfect lawn look while ensuring optimal health of the grass.

Additionally, the ergonomic handle design contributes to user comfort during operation. This mower is lightweight and easy to maneuver, reducing fatigue during longer mowing sessions. Snapper also focuses on user-friendly features, including an easy-start system that enables users to begin mowing with minimal effort.

The snapper FRP216016 is also designed with durability in mind, featuring high-quality materials that resist wear and tear over time. This durability ensures that the mower remains a reliable tool in your lawn care arsenal for years to come.

In conclusion, the Snapper FRP216016 lawn mower is an excellent choice for individuals seeking power, efficiency, and ease of use in their lawn care routines. With features tailored to meet the demands of various mowing conditions, it stands out as a top contender in the realm of residential and light commercial mowing equipment. Whether you're maintaining your yard or managing a small golf course, the Snapper FRP216016 is engineered to exceed expectations.
Top Page Image Contents