Snapper FRP216016 PRE-START Check List, Starting & Operation 2.2.1. Engine & Blade, Primer Models

Page 6

Section 2 - OPERATING INSTRUCTIONS

2.1PRE-START CHECK LIST

Make the following checks and perform the service required before each start-up.

2.1.1.Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened.

2.1.2.Check blade control and wheel drive control to insure they work freely. See Figure 2.1.

RECYCLING MODEL SHOWN (ROPE START MOUNTED ON RIGHT SIDE OF HANDLE)

WHEEL DRIVE

BLADECONTROL

CONTROL

FIGURE 2.1

2.1.3.Check cutting height. Adjust to desired height.

2.1.4.Check engine oil and add oil as needed to bring level up to the full mark. Refer to Engine Owner’s Manual for oil specifications. See Figure 2.2.

FIGURE 2.2

2.1.5.Add fuel to tank after pushing the mower outside where fumes can safely dissipate. Make sure cap is tightened after refueling. Refer to Engine Owners Manual for specifications.

2.1.6.Clean exterior surfaces of cutting deck and engine of any accumulation of spilled fuel, dirt, grass, oil, etc. Keep engine air intake screen and cooling fins clear at all times.

2.2STARTING & OPERATION 2.2.1. ENGINE & BLADE

(Primer Models)

1.Move engine speed control to the “Fast” (Rabbit) position. See Figure 2.3.

NOTE: Stop the engine (and blade) by releasing the blade control.

CATCHER MODEL SHOWN (ROPE START MOUNTED ON LEFT SIDE OF HANDLE)

BLADE

CONTROL

WHEEL

DRIVE

CONTROL

ENGINE SPEED CONTROL (SHOWN IN FAST

FIGURE 2.3

2.Push primer button three times to start a cold engine. NOTE: Do not use primer button to start warm engine.

3.Pull blade control against handle.

4.Pull rope start handle to crank engine.

5.After engine starts, allow a brief warm-up until engine runs smooth.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Steel Deck Walk Mowers Series Important Safety Instructions Operation Table of Contents Introduction NomenclaturePRE-START Check List Starting & Operation 2.2.1. Engine & BladePrimer Models Propelling Mower Cutting Height AdjustmentHandle Height Adjustment StoppingRecycling Operation Adjusting Front Deck BaffleInstallation of Grass Catcher Models with an F prefix in model numberService After First 5 Hours 3.2.1. Change Engine OIL On NextCheck Mower Blade Service AnnuallyStorage Procedure Check Engine Drive BeltMower Blade Replacement 4.1.1. Standard Blade Wear Limit Blade Sharpening1A. Ninja Blade Wear Limit Wheel Drive Control Adjustment Cleaning Drive Disc & Driven Disc Driven Disc ServiceDriven Disc Adjustment Drive Spring Repair/ReplacementReplacing Rubber Driven Disc Ring Replacing Rubber Driven Disc Ring From Previous Belt Service Drive Idler Pulley Differential Bracket Troubleshooting Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed EachClean Sponge Element Engine Manual 100Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Steel Deck Walk Behind Mowers Series

FRP216016 specifications

The Snapper FRP216016 is a versatile and innovative lawn mower designed to enhance the efficiency of lawn care for both residential and commercial users. One of its standout features is the powerful 21-inch cutting deck, which is engineered to deliver a clean and precise cut across various types of grass and terrain. This size allows for optimum maneuverability, making it ideal for small to medium-sized lawns while still having the capacity to manage larger spaces effectively.

Equipped with a reliable 160cc engine, the FRP216016 ensures robust performance, enabling it to handle tough mowing conditions without compromising on power. This engine features advanced technology that not only provides ample torque but also promotes fuel efficiency, translating to longer run times and reduced operational costs.

The Snapper FRP216016 also incorporates the innovative SureCut technology, which enhances the cutting experience by preventing grass clumping, resulting in a well-manicured lawn. This unique design helps to disperse clippings more evenly, minimizing the need for additional clean-up after mowing.

Another key characteristic of the FRP216016 is its height adjustment feature, allowing users to customize the cut to their preference with ease. The mower offers multiple cutting height positions, accommodating various grass types and seasonal preferences. This flexibility is crucial for achieving the perfect lawn look while ensuring optimal health of the grass.

Additionally, the ergonomic handle design contributes to user comfort during operation. This mower is lightweight and easy to maneuver, reducing fatigue during longer mowing sessions. Snapper also focuses on user-friendly features, including an easy-start system that enables users to begin mowing with minimal effort.

The snapper FRP216016 is also designed with durability in mind, featuring high-quality materials that resist wear and tear over time. This durability ensures that the mower remains a reliable tool in your lawn care arsenal for years to come.

In conclusion, the Snapper FRP216016 lawn mower is an excellent choice for individuals seeking power, efficiency, and ease of use in their lawn care routines. With features tailored to meet the demands of various mowing conditions, it stands out as a top contender in the realm of residential and light commercial mowing equipment. Whether you're maintaining your yard or managing a small golf course, the Snapper FRP216016 is engineered to exceed expectations.
Top Page Image Contents