Snapper FRP216016 important safety instructions Operation

Page 3

IMPORTANT SAFETY INSTRUCTIONS

OPERATION

1.DO NOT put hands or feet near or under rotating parts. Keep clear of discharge area while engine is running.

2.STOP engine when crossing gravel drives, walks, or roads, and under any conditions where thrown objects might be a hazard.

3.Mow only in daylight or good artificial light.

4.DO NOT operate mower while under the influence of alcohol or drugs.

5.After striking a foreign object or if mower vibrates abnormally, STOP the engine, disconnect and secure spark plug wire. Inspect the mower for any damage and repair the damage.

6.DO NOT mow near drop offs, ditches or embankments. Operator could lose footing or balance.

7.STAY ALERT for holes and other hidden hazards. Tall grass can hide obstacles. Keep away from ditches, washouts, culverts, fences and protruding objects.

8.DO NOT mow on wet grass. Always be sure of your footing. Keep a firm hold on the handle and walk, never run. Slipping could cause injury.

9.DO NOT leave the machine with the engine running. STOP BLADE and STOP ENGINE before leaving the operators position for any reason.

10.Before cleaning, repairing or inspecting make certain engine, blade and all moving parts have STOPPED. Disconnect and secure spark plug wire away from plug to prevent accidental starting.

11.STOP engine and wait until the blade comes to complete STOP before removing grass bag and/or clearing grass.

12.DO NOT operate mower without the entire grass catcher or guards in place. DO NOT point discharge at people, passing cars, windows or doors.

13.Slow down before turning.

14.Watch out for traffic when near or crossing roadways.

15.DO NOT operate engine in enclosed areas. Engine exhaust gases contain carbon monoxide, a deadly poison.

3

MAINTENANCE AND STORAGE

1.DO NOT store mower or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of reach of children in a well ventilated, unoccupied building.

2.Keep mower and engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4.Keep all bolts, especially blade bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

5.Always provide adequate ventilation when running engine. Engine exhaust gases contain carbon monoxide, a deadly poison.

6.Service engine and make adjustments only when engine is stopped. Removed spark plug wire from spark plug and secure wire away from spark plug to prevent accidental starting.

7.DO NOT change engine governor speed settings or overspeed engine.

8.Check grass bag assembly frequently for wear or deterioration to avoid thrown objects and exposure to moving parts. Replace with new bag if loose seams or tears are evident. Replace slider or bag adapter if broken or cracked.

9.Mower blades are sharp and can cut. Wrap the blades or wear heavy leather gloves and use CAUTION when handling them.

10.DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exiting engine.

11.Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.

12.Use only genuine SNAPPER replacement parts to assure that original standards are maintained.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Steel Deck Walk Mowers Series Important Safety Instructions Operation Table of Contents Nomenclature IntroductionPRE-START Check List Starting & Operation 2.2.1. Engine & BladePrimer Models Stopping Cutting Height AdjustmentHandle Height Adjustment Propelling MowerModels with an F prefix in model number Adjusting Front Deck BaffleInstallation of Grass Catcher Recycling OperationOn Next Service After First 5 Hours 3.2.1. Change Engine OILCheck Engine Drive Belt Service AnnuallyStorage Procedure Check Mower BladeMower Blade Replacement 4.1.1. Standard Blade Wear Limit Blade Sharpening1A. Ninja Blade Wear Limit Wheel Drive Control Adjustment Drive Spring Repair/Replacement Driven Disc ServiceDriven Disc Adjustment Cleaning Drive Disc & Driven DiscReplacing Rubber Driven Disc Ring Replacing Rubber Driven Disc Ring From Previous Belt Service Drive Idler Pulley Differential Bracket Problem Probable Cause Corrective Action Troubleshooting100 Service Performed EachClean Sponge Element Engine Manual MAINTENANCE/REPLACEMENT PartsDisclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Steel Deck Walk Behind Mowers Series

FRP216016 specifications

The Snapper FRP216016 is a versatile and innovative lawn mower designed to enhance the efficiency of lawn care for both residential and commercial users. One of its standout features is the powerful 21-inch cutting deck, which is engineered to deliver a clean and precise cut across various types of grass and terrain. This size allows for optimum maneuverability, making it ideal for small to medium-sized lawns while still having the capacity to manage larger spaces effectively.

Equipped with a reliable 160cc engine, the FRP216016 ensures robust performance, enabling it to handle tough mowing conditions without compromising on power. This engine features advanced technology that not only provides ample torque but also promotes fuel efficiency, translating to longer run times and reduced operational costs.

The Snapper FRP216016 also incorporates the innovative SureCut technology, which enhances the cutting experience by preventing grass clumping, resulting in a well-manicured lawn. This unique design helps to disperse clippings more evenly, minimizing the need for additional clean-up after mowing.

Another key characteristic of the FRP216016 is its height adjustment feature, allowing users to customize the cut to their preference with ease. The mower offers multiple cutting height positions, accommodating various grass types and seasonal preferences. This flexibility is crucial for achieving the perfect lawn look while ensuring optimal health of the grass.

Additionally, the ergonomic handle design contributes to user comfort during operation. This mower is lightweight and easy to maneuver, reducing fatigue during longer mowing sessions. Snapper also focuses on user-friendly features, including an easy-start system that enables users to begin mowing with minimal effort.

The snapper FRP216016 is also designed with durability in mind, featuring high-quality materials that resist wear and tear over time. This durability ensures that the mower remains a reliable tool in your lawn care arsenal for years to come.

In conclusion, the Snapper FRP216016 lawn mower is an excellent choice for individuals seeking power, efficiency, and ease of use in their lawn care routines. With features tailored to meet the demands of various mowing conditions, it stands out as a top contender in the realm of residential and light commercial mowing equipment. Whether you're maintaining your yard or managing a small golf course, the Snapper FRP216016 is engineered to exceed expectations.
Top Page Image Contents