Snapper FRP216016 important safety instructions Important Safety Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind and body and must not be under the influence of any substance, which might impair vision, dexterity or judgment. If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).

PROTECTION FOR CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

1.KEEP children out of the mowing area and under the watchful care of a responsible adult.

2.DO NOT allow children in yard when machine is operated and turn machine OFF if anyone enters the area.

3.DO NOT allow pre-teenage children to operate machine.

4.ALLOW only responsible adults & teenagers with mature judgment under close adult supervision to operate machine.

5.DO NOT pull mower backwards unless absolutely necessary. LOOK and SEE behind and down for children, pets and hazards before and while backing.

6.USE EXTRA CARE when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

SLOPE OPERATION

1.Slopes are a major factor related to slip and fall accidents, which can result in severe injury. All slopes require extra caution. If you feel uneasy on a slope, DO NOT mow it.

2.Mow across slopes, never up-and-down. Exercise extreme CAUTION when changing directions on slopes. DO NOT mow steep slopes or other areas where stability or traction is in doubt.

3.Use extra care with crass catchers or other attachments; these affect the handling and the stability of the machine.

PREPARATION

1.Read, understand, and follow instructions and warnings in this manual and on the mower, engine and attachments. Know the controls and the proper use of the mower before starting.

2.Only mature, responsible persons shall operate the machine and only after proper instruction.

PREPARATION

(Continued From Previous Column)

3.Data indicates that operators age 60 and above, are involved in a large percentage of mower- related injuries. These operators should evaluate their ability to operate the mower safely enough to protect themselves and others from serious injury.

4.Handle fuel with extra care. Fuels are flammable and vapors are explosive. Use only an approved fuel container. DO NOT remove fuel cap or add fuel with engine running. Add fuel outdoors only with engine stopped and cool. Clean spilled fuel and oil from machine. DO NOT smoke.

5.Check the area to be mowed and remove all objects such as toys, wire, rocks, limbs and other objects that could cause injury if thrown by blade or interfere with mowing. Also note the location of holes, stumps, and other possible hazards.

6.Keep people and pets out of the mowing area. Immediately, STOP Blade, Stop engine and Stop mower if anyone enters the area.

7.Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.

8.Make sure all safety decals are clearly legible. Replace if damaged.

9.Protect yourself when mowing and wear safety glasses, long pants and substantial footwear. DO NOT mow barefooted or with sandals.

10.Know how to STOP blade and engine quickly in preparation for emergencies.

11.Use extra care when loading or unloading the machine into a trailer or truck.

12.Check grass catcher components frequently for signs of wear or deterioration and replace as needed to prevent injury from thrown objects going through weak or torn spots.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Steel Deck Walk Mowers Series Important Safety Instructions Operation Table of Contents Introduction NomenclaturePrimer Models PRE-START Check ListStarting & Operation 2.2.1. Engine & Blade Propelling Mower Cutting Height AdjustmentHandle Height Adjustment StoppingRecycling Operation Adjusting Front Deck BaffleInstallation of Grass Catcher Models with an F prefix in model numberService After First 5 Hours 3.2.1. Change Engine OIL On NextCheck Mower Blade Service AnnuallyStorage Procedure Check Engine Drive Belt1A. Ninja Blade Wear Limit Mower Blade Replacement 4.1.1. Standard Blade Wear LimitBlade Sharpening Wheel Drive Control Adjustment Cleaning Drive Disc & Driven Disc Driven Disc ServiceDriven Disc Adjustment Drive Spring Repair/ReplacementReplacing Rubber Driven Disc Ring Replacing Rubber Driven Disc Ring From Previous Belt Service Drive Idler Pulley Differential Bracket Troubleshooting Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed EachClean Sponge Element Engine Manual 100Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Steel Deck Walk Behind Mowers Series

FRP216016 specifications

The Snapper FRP216016 is a versatile and innovative lawn mower designed to enhance the efficiency of lawn care for both residential and commercial users. One of its standout features is the powerful 21-inch cutting deck, which is engineered to deliver a clean and precise cut across various types of grass and terrain. This size allows for optimum maneuverability, making it ideal for small to medium-sized lawns while still having the capacity to manage larger spaces effectively.

Equipped with a reliable 160cc engine, the FRP216016 ensures robust performance, enabling it to handle tough mowing conditions without compromising on power. This engine features advanced technology that not only provides ample torque but also promotes fuel efficiency, translating to longer run times and reduced operational costs.

The Snapper FRP216016 also incorporates the innovative SureCut technology, which enhances the cutting experience by preventing grass clumping, resulting in a well-manicured lawn. This unique design helps to disperse clippings more evenly, minimizing the need for additional clean-up after mowing.

Another key characteristic of the FRP216016 is its height adjustment feature, allowing users to customize the cut to their preference with ease. The mower offers multiple cutting height positions, accommodating various grass types and seasonal preferences. This flexibility is crucial for achieving the perfect lawn look while ensuring optimal health of the grass.

Additionally, the ergonomic handle design contributes to user comfort during operation. This mower is lightweight and easy to maneuver, reducing fatigue during longer mowing sessions. Snapper also focuses on user-friendly features, including an easy-start system that enables users to begin mowing with minimal effort.

The snapper FRP216016 is also designed with durability in mind, featuring high-quality materials that resist wear and tear over time. This durability ensures that the mower remains a reliable tool in your lawn care arsenal for years to come.

In conclusion, the Snapper FRP216016 lawn mower is an excellent choice for individuals seeking power, efficiency, and ease of use in their lawn care routines. With features tailored to meet the demands of various mowing conditions, it stands out as a top contender in the realm of residential and light commercial mowing equipment. Whether you're maintaining your yard or managing a small golf course, the Snapper FRP216016 is engineered to exceed expectations.
Top Page Image Contents