Snapper MR216015T Starting & Operation 2.2.2. Engine & Blade, Choke ModelsCommercial Only

Page 7

Section 2 - OPERATING INSTRUCTIONS

2.2 STARTING & OPERATION 2.2.2. ENGINE & BLADE

(Choke Models)(Commercial Only)

1.Move engine speed control to the “Choke” position. See Figure 2.4.

NOTE: Stop the engine (and blade) by releasing the blade control.

MOVE CHOKE/ENGINE

SPEED CONTROL TO THE

CHOKE POSITION

PULL ROPE START

HANDLE TO CRANK

ENGINE

PULL BLADE

CONTROL AGAINST

HANDLE

ENGAGE

WHEEL DRIVE

CONTROL

FIGURE 2.4

NOTE: Do not use choke to start warm engine.

2.Pull blade control against handle.

3.Pull rope start handle to crank engine.

4.After engine starts, move engine speed control away from the choke position to the “Fast” (Rabbit) position and allow a brief warm-up until engine runs smooth.

WARNING

Stop engine and mower blade by releasing the blade control before adjusting ground speed.

2.2.3.PROPELLING MOWER

(Self Propelled Models Only)

1.Stop engine and mower blade by releasing the blade control before adjusting ground speed. Move ground speed control to the desired speed position. See Figure 2.5.

2.Start engine. Refer to Section “Starting & Operation”.

3.Move wheel drive control against handle to engage wheel drive and propel mower forward. See Figure 2.4.

GROUND SPEED

CONTROL

FAST SPEED

SLOW SPEED

FIGURE 2.5

2.3STOPPING

Stop engine and blade by releasing the blade control. Stop forward motion of mower by releasing the wheel drive control.

2.4HANDLE HEIGHT ADJUSTMENT

The height of the mower handle can be adjusted as follows:

1. Loosen the lower nuts on each lower handle as shown in Figure 2.6.

HIGHER

LOWER

HANDLE

LOWER

LOOSEN LOWER

NUTS ON EACH

LOWER HANDLE

FIGURE 2.6

2.Move upper mower handle up or down until the desired position is achieved.

3.Tighten the lower nuts on each lower handle to maintain desired position.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Steel Deck Walk Mowers M Model Series Important Safety Instructions Operation Table of Contents Nomenclature IntroductionStarting & Operation 2.2.1. Engine & Blade PRE-START Check ListPrimer Models Push & Non Commercial Self-Propelled Propelling Mower Handle Height AdjustmentStarting & Operation 2.2.2. Engine & Blade Choke ModelsCommercial OnlyRecycling Operation Cutting Height AdjustmentCheck Grease Level in Transmission Service After First 5 Hours 3.2.1. Change Engine OILOn Next Check Engine Drive Belt Service AnnuallyStorage Procedure Check Mower BladeBlade Sharpening Mower Blade Replacement 4.1.1. Standard Blade Wear LimitNinja Blade Wear Limit Wheel Drive Control Adjustment Driven Disc Adjustment Driven Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementReplacing Rubber Driven Disc Ring Replacing Bearing In Driven Disc Assembly Engine Drive Belt Replacement Stretch Type Belts Belt ServicePulley Position Transmission Poly-V Belt ReplacementProblem Probable Cause Corrective Action Troubleshooting100 Service Performed EachClean Sponge Element Engine Manual MAINTENANCE/REPLACEMENT PartsDisclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Steel Deck Walk Behind Mowers M Model Series

MR216015T specifications

The Snapper MR216015T is a versatile and powerful lawn mower designed for residential and commercial use. Renowned for its durability and performance, this model appeals to those seeking efficiency and dependability in lawn maintenance.

One of the standout features of the Snapper MR216015T is its robust 159cc Briggs & Stratton engine, which delivers reliable power for a variety of mowing tasks. This engine is designed for longevity and requires minimal maintenance, making it an appealing choice for those who prioritize ease of use.

The mower incorporates a 21-inch steel cutting deck, which not only ensures a wide cutting swath but also contributes to a professional-looking finish. The deck is engineered for durability and is complemented by a 3-in-1 cutting system, allowing users to choose from side discharge, mulching, or bagging options. This versatility ensures that mowing can be tailored to different lawn types and conditions, making it ideal for various outdoor spaces.

Another key feature of the Snapper MR216015T is its adjustable cutting height system. With six different height settings, users can easily adapt the mower to achieve the desired grass length, enhancing user control and lawn health. This feature is particularly beneficial for those with varying grass types or uneven terrains.

Ergonomics is also a focus in the design of this mower. The handle is adjustable and designed for comfort, allowing operators of different heights to operate the mower without strain. Additionally, the foldable design of the handle facilitates easy storage and transportation, which is an essential consideration for those with limited garage space.

The Snapper MR216015T is equipped with a reliable starting system, which enhances user convenience. Its easy pull-start mechanism ensures that the mower is ready to go when needed, eliminating the frustration of difficult starts often encountered with other models.

Lastly, the Snapper MR216015T has a reputation for being environmentally friendly due to its efficient design that optimizes fuel consumption while minimizing emissions. This makes it a responsible choice for environmentally conscious consumers.

In summary, the Snapper MR216015T lawn mower boasts a powerful engine, a durable cutting deck, adjustable height controls, user-friendly ergonomics, and an efficient starting system, making it a leading choice for anyone looking for reliability and performance in lawn care.
Top Page Image Contents