Snapper MR216015T Mower Blade Replacement 4.1.1. Standard Blade Wear Limit, Blade Sharpening

Page 11

Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

4.1 MOWER BLADE REPLACEMENT 4.1.1. STANDARD BLADE WEAR LIMIT

1.Inspect blade frequently for signs of excessive wear or damage. See Figure 4.1.

NEW

BLADEWEAR LIMIT (NOTCH STARTS)

DANGEROUS

CONDITION!

DO NOT USE ON

MOWER! REPLACE

WITH NEW BLADE.

2.Replace the blade if it is badly chipped, bent, noticeably out of balance or has cracks or notch in either tip. See Figure 4.1 & 4.2. Replace with new blade.

WARNING

DO NOT use a cutting blade that shows signs of excessive wear or damage. Refer to Section “MOWER BLADE REPLACEMENT” for proper blade inspection and service procedures.

4.1.3. BLADE SHARPENING

1.Disconnect spark plug wire and secure end away from plug.

IMPORTANT: DO NOT tip machine with carburetor or spark plug down. Oil from crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

2.Tilt mower up on its rear wheels.

3.Remove blade. See Figure 4.3.

FIGURE 4.1

4.1.2.NINJA BLADE WEAR LIMIT

1.Inspect blade frequently for signs of excessive wear or damage. See Figure 4.2.

BLADE

HUB

FLANGE

BLADE

MAKE SURE THAT BLADE HUB IS SEATED BETWEEN FLANGES

NEW BLADE

WEAR LIMIT. CRACKS

OR NOTCHES BEGIN

 

 

TO APPEAR ON TIP.

CONE WASHER (Concave Side Up)

CAPSCREW

FIGURE 4.3

DANGEROUS!

DO NOT USE A BLADE IN

THIS CONDITION!

FIGURE 4.2

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Steel Deck Walk Mowers M Model Series Important Safety Instructions Operation Table of Contents Nomenclature IntroductionPrimer Models Push & Non Commercial Self-Propelled PRE-START Check ListStarting & Operation 2.2.1. Engine & Blade Propelling Mower Handle Height AdjustmentStarting & Operation 2.2.2. Engine & Blade Choke ModelsCommercial OnlyRecycling Operation Cutting Height AdjustmentOn Next Service After First 5 Hours 3.2.1. Change Engine OILCheck Grease Level in Transmission Check Engine Drive Belt Service AnnuallyStorage Procedure Check Mower BladeNinja Blade Wear Limit Mower Blade Replacement 4.1.1. Standard Blade Wear LimitBlade Sharpening Wheel Drive Control Adjustment Driven Disc Adjustment Driven Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementReplacing Rubber Driven Disc Ring Replacing Bearing In Driven Disc Assembly Engine Drive Belt Replacement Stretch Type Belts Belt ServicePulley Position Transmission Poly-V Belt ReplacementProblem Probable Cause Corrective Action Troubleshooting100 Service Performed EachClean Sponge Element Engine Manual MAINTENANCE/REPLACEMENT PartsDisclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Steel Deck Walk Behind Mowers M Model Series

MR216015T specifications

The Snapper MR216015T is a versatile and powerful lawn mower designed for residential and commercial use. Renowned for its durability and performance, this model appeals to those seeking efficiency and dependability in lawn maintenance.

One of the standout features of the Snapper MR216015T is its robust 159cc Briggs & Stratton engine, which delivers reliable power for a variety of mowing tasks. This engine is designed for longevity and requires minimal maintenance, making it an appealing choice for those who prioritize ease of use.

The mower incorporates a 21-inch steel cutting deck, which not only ensures a wide cutting swath but also contributes to a professional-looking finish. The deck is engineered for durability and is complemented by a 3-in-1 cutting system, allowing users to choose from side discharge, mulching, or bagging options. This versatility ensures that mowing can be tailored to different lawn types and conditions, making it ideal for various outdoor spaces.

Another key feature of the Snapper MR216015T is its adjustable cutting height system. With six different height settings, users can easily adapt the mower to achieve the desired grass length, enhancing user control and lawn health. This feature is particularly beneficial for those with varying grass types or uneven terrains.

Ergonomics is also a focus in the design of this mower. The handle is adjustable and designed for comfort, allowing operators of different heights to operate the mower without strain. Additionally, the foldable design of the handle facilitates easy storage and transportation, which is an essential consideration for those with limited garage space.

The Snapper MR216015T is equipped with a reliable starting system, which enhances user convenience. Its easy pull-start mechanism ensures that the mower is ready to go when needed, eliminating the frustration of difficult starts often encountered with other models.

Lastly, the Snapper MR216015T has a reputation for being environmentally friendly due to its efficient design that optimizes fuel consumption while minimizing emissions. This makes it a responsible choice for environmentally conscious consumers.

In summary, the Snapper MR216015T lawn mower boasts a powerful engine, a durable cutting deck, adjustable height controls, user-friendly ergonomics, and an efficient starting system, making it a leading choice for anyone looking for reliability and performance in lawn care.
Top Page Image Contents