Snapper MRP216015B Mower Blade Replacement 4.1.1. Standard Blade Wear Limit, Blade Sharpening

Page 11

Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

4.1 MOWER BLADE REPLACEMENT 4.1.1. STANDARD BLADE WEAR LIMIT

1.Inspect blade frequently for signs of excessive wear or damage. See Figure 4.1.

NEW

BLADEWEAR LIMIT (NOTCH STARTS)

DANGEROUS

CONDITION!

DO NOT USE ON

MOWER! REPLACE

WITH NEW BLADE.

2.Replace the blade if it is badly chipped, bent, noticeably out of balance or has cracks or notch in either tip. See Figure 4.1 & 4.2. Replace with new blade.

WARNING

DO NOT use a cutting blade that shows signs of excessive wear or damage. Refer to Section “MOWER BLADE REPLACEMENT” for proper blade inspection and service procedures.

4.1.3. BLADE SHARPENING

1.Disconnect spark plug wire and secure end away from plug.

IMPORTANT: DO NOT tip machine with carburetor or spark plug down. Oil from crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

2.Tilt mower up on its rear wheels.

3.Remove blade. See Figure 4.3.

FIGURE 4.1

4.1.2.NINJA BLADE WEAR LIMIT

1.Inspect blade frequently for signs of excessive wear or damage. See Figure 4.2.

BLADE

HUB

FLANGE

BLADE

MAKE SURE THAT BLADE HUB IS SEATED BETWEEN FLANGES

NEW BLADE

WEAR LIMIT. CRACKS

OR NOTCHES BEGIN

 

 

TO APPEAR ON TIP.

CONE WASHER (Concave Side Up)

CAPSCREW

FIGURE 4.3

DANGEROUS!

DO NOT USE A BLADE IN

THIS CONDITION!

FIGURE 4.2

11

Image 11
Contents Steel Deck Walk Mowers M Model Series Important Safety Instructions Operation Table of Contents Nomenclature IntroductionStarting & Operation 2.2.1. Engine & Blade PRE-START Check ListStopping Handle Height AdjustmentStarting & Operation Recycling Operation Cutting Height AdjustmentOn Next Service After First 5 Hours 3.2.1. Change Engine OILCheck Grease Level in Transmission Check Engine Drive Belt Service AnnuallyStorage Procedure Check Mower BladeNinja Blade Wear Limit Mower Blade Replacement 4.1.1. Standard Blade Wear LimitBlade Sharpening Wheel Drive Control Adjustment Driven Disc Adjustment Driven Disc ServiceCleaning Drive Disc & Driven Disc Drive Spring Repair/ReplacementReplacing Rubber Driven Disc Ring Replacing Bearing In Driven Disc Assembly Engine Drive Belt Replacement Stretch Type Belts Belt ServicePulley Position Transmission Poly-V Belt ReplacementProblem Probable Cause Corrective Action Troubleshooting100 Service Performed EachClean Sponge Element Engine Manual MAINTENANCE/REPLACEMENT PartsDisclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Steel Deck Walk Behind Mowers M Model Series

MRP216015B specifications

The Snapper MRP216015B is a versatile and efficient lawn mower designed to provide exceptional performance for both residential and commercial gardening needs. As a part of Snapper’s trusted range of outdoor power equipment, the MRP216015B stands out for its innovative features and user-friendly technology.

One of the primary features of the MRP216015B is its robust 159cc OHV engine, which delivers reliable power and performance. This engine ensures that the mower can tackle various types of grass and terrain, making it suitable for a wide range of mowing conditions. The easy start technology allows users to get going quickly without the frustration of a traditional pull-start mechanism.

Another distinguishing characteristic of the Snapper MRP216015B is its 21-inch cutting deck. This size strikes a great balance between maneuverability and coverage, allowing users to cover large areas efficiently while still being able to navigate tight spaces. The steel construction of the deck provides durability, ensuring that the mower can withstand the rigors of regular use.

Additionally, the MRP216015B features a 3-in-1 mowing capability, enabling users to choose between mulching, bagging, or side discharge. This versatility allows for customization based on the specific needs and preferences of the user, whether they want to mulch for added fertilization or bag clippings for a cleaner finish.

The adjustable cutting height feature is another key technology that makes the Snapper MRP216015B stand out. With a simple lever adjustment, users can select from different cutting heights ranging from 1 to 4 inches. This adaptability ensures that the mower can handle different grass types and adapts to seasonal growth patterns effectively.

Comfort and convenience are paramount in the design of the MRP216015B. The ergonomic handle, equipped with cushioning, allows for extended operation without fatigue. Additionally, the foldable handle makes it easy to store the mower in smaller spaces when not in use.

In summary, the Snapper MRP216015B is a powerful, versatile, and user-friendly lawn mower. With its strong engine, durable cutting deck, and adaptable features, the MRP216015B is an excellent choice for anyone looking to achieve a well-manicured lawn efficiently and effectively.