Snapper MRP216015B PRE-START Check List, Starting & Operation 2.2.1. Engine & Blade

Page 6

Section 2 - OPERATING INSTRUCTIONS

2.1PRE-START CHECK LIST

Make the following checks and perform the service required before each start-up.

2.1.1.Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened.

2.1.2.Check blade control and wheel drive control to insure they work freely. See Figure 2.1.

WHEEL

DRIVE

CONTROL

BLADE

CONTROL

FIGURE 2.1

2.1.3.Check cutting height. Adjust to desired height.

2.1.4.Check engine oil and add oil as needed to bring level up to the full mark. Refer to Engine Owner’s Manual for oil specifications. See Figure 2.2.

FIGURE 2.2

2.1.5.Add fuel to tank after pushing the mower outside where fumes can safely dissipate. Make sure cap is tightened after refueling. Refer to Engine Owners Manual for specifications.

2.1.6.Clean exterior surfaces of cutting deck and engine of any accumulation of spilled fuel, dirt, grass, oil, etc. Keep engine air intake screen and cooling fins clear at all times.

2.2STARTING & OPERATION 2.2.1. ENGINE & BLADE

The engine speed is preset and is not adjustable. A primer is provided to assist in starting a cold engine.

1.Push primer bulb three times to start a cold engine. NOTE: The primer should not be required to restart a hot engine. See Figure 2.3.

NOTE: Stop the engine (and blade) by releasing the blade control.

FOR ENGINES

EQUIPPED

WITH PRIMER

BULB

PUSH PRIMER BULB

THREE TIMES TO

START COLD

ENGINE

FIGURE 2.3

2.Pull blade control against handle.

3.Pull rope start handle to crank engine.

4.After engine starts, allow a brief warm-up until engine runs smooth.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Steel Deck Walk Mowers M Model Series Important Safety Instructions Operation Table of Contents Introduction NomenclaturePRE-START Check List Starting & Operation 2.2.1. Engine & BladeHandle Height Adjustment Starting & OperationStopping Cutting Height Adjustment Recycling OperationService After First 5 Hours 3.2.1. Change Engine OIL Check Grease Level in TransmissionOn Next Check Mower Blade Service AnnuallyStorage Procedure Check Engine Drive BeltMower Blade Replacement 4.1.1. Standard Blade Wear Limit Blade SharpeningNinja Blade Wear Limit Wheel Drive Control Adjustment Drive Spring Repair/Replacement Driven Disc ServiceCleaning Drive Disc & Driven Disc Driven Disc AdjustmentReplacing Rubber Driven Disc Ring Replacing Bearing In Driven Disc Assembly Belt Service Engine Drive Belt Replacement Stretch Type BeltsTransmission Poly-V Belt Replacement Pulley PositionTroubleshooting Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed EachClean Sponge Element Engine Manual 100Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Steel Deck Walk Behind Mowers M Model Series

MRP216015B specifications

The Snapper MRP216015B is a versatile and efficient lawn mower designed to provide exceptional performance for both residential and commercial gardening needs. As a part of Snapper’s trusted range of outdoor power equipment, the MRP216015B stands out for its innovative features and user-friendly technology.

One of the primary features of the MRP216015B is its robust 159cc OHV engine, which delivers reliable power and performance. This engine ensures that the mower can tackle various types of grass and terrain, making it suitable for a wide range of mowing conditions. The easy start technology allows users to get going quickly without the frustration of a traditional pull-start mechanism.

Another distinguishing characteristic of the Snapper MRP216015B is its 21-inch cutting deck. This size strikes a great balance between maneuverability and coverage, allowing users to cover large areas efficiently while still being able to navigate tight spaces. The steel construction of the deck provides durability, ensuring that the mower can withstand the rigors of regular use.

Additionally, the MRP216015B features a 3-in-1 mowing capability, enabling users to choose between mulching, bagging, or side discharge. This versatility allows for customization based on the specific needs and preferences of the user, whether they want to mulch for added fertilization or bag clippings for a cleaner finish.

The adjustable cutting height feature is another key technology that makes the Snapper MRP216015B stand out. With a simple lever adjustment, users can select from different cutting heights ranging from 1 to 4 inches. This adaptability ensures that the mower can handle different grass types and adapts to seasonal growth patterns effectively.

Comfort and convenience are paramount in the design of the MRP216015B. The ergonomic handle, equipped with cushioning, allows for extended operation without fatigue. Additionally, the foldable handle makes it easy to store the mower in smaller spaces when not in use.

In summary, the Snapper MRP216015B is a powerful, versatile, and user-friendly lawn mower. With its strong engine, durable cutting deck, and adaptable features, the MRP216015B is an excellent choice for anyone looking to achieve a well-manicured lawn efficiently and effectively.
Top Page Image Contents