Snapper MRP216015B important safety instructions Replacing Rubber Driven Disc Ring

Page 14

Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

4.3.3.DRIVEN DISC ADJUSTMENT (Continued From Previous Page)

2.Remove driven disc spring from driven disc assembly. Loosen connector hex nut. See Figure

DRIVEN DISC ASSEMBLY

DRIVE

DISC

DRIVEN

DISC

SPRING

TRANSFER

ROD

CONNECTOR

CONNECTOR

HEX NUT

FIGURE 4.9

3.Slide driven disc assembly over to 1/8” from outside edge of drive disc. Maintaining the 1/8” measurement, remove any looseness from the linkage. This can be done by holding the transfer rod and applying pressure to the left (as viewed from operators position). Then retighten the connector hex nut securely. See Figure 4.10. Move ground speed control to the first speed position, then back to the sixth speed position. Recheck the 1/8” measurement described previously. Reinstall driven disc spring to driven disc assembly.

1/8” MEASUREMENT TO

SLIDE DRIVEN

OUTSIDE EDGE OF

DISC ASSEMBLY

DRIVE DISC

TOWARD

 

OUTSIDE EDGE

DRIVE

 

DISC

TRANSFER

ROD

CONNECTOR HEX NUT

 

OUTSIDE

CONNECTOR

EDGE

 

FIGURE 4.10

4.3.4. Replacing Rubber Driven Disc Ring

If the rubber ring is badly chunked or worn down to within 1/16” of the metal rim of the driven disc hub, it must be replaced. Install new rubber ring as follows:

1.Using a small flat blade screwdriver, free the clip from the transfer rod. Then remove the transfer rod from the clip and the speed control rod. See Figure

CONNECTOR

CLIP

TRANSFER ROD

SPEED CONTROL

ROD

FIGURE 4.11

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Steel Deck Walk Mowers M Model Series Important Safety Instructions Operation Table of Contents Introduction NomenclaturePRE-START Check List Starting & Operation 2.2.1. Engine & BladeStopping Handle Height AdjustmentStarting & Operation Cutting Height Adjustment Recycling OperationOn Next Service After First 5 Hours 3.2.1. Change Engine OILCheck Grease Level in Transmission Check Mower Blade Service AnnuallyStorage Procedure Check Engine Drive BeltNinja Blade Wear Limit Mower Blade Replacement 4.1.1. Standard Blade Wear LimitBlade Sharpening Wheel Drive Control Adjustment Drive Spring Repair/Replacement Driven Disc ServiceCleaning Drive Disc & Driven Disc Driven Disc AdjustmentReplacing Rubber Driven Disc Ring Replacing Bearing In Driven Disc Assembly Belt Service Engine Drive Belt Replacement Stretch Type BeltsTransmission Poly-V Belt Replacement Pulley PositionTroubleshooting Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed EachClean Sponge Element Engine Manual 100Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Steel Deck Walk Behind Mowers M Model Series

MRP216015B specifications

The Snapper MRP216015B is a versatile and efficient lawn mower designed to provide exceptional performance for both residential and commercial gardening needs. As a part of Snapper’s trusted range of outdoor power equipment, the MRP216015B stands out for its innovative features and user-friendly technology.

One of the primary features of the MRP216015B is its robust 159cc OHV engine, which delivers reliable power and performance. This engine ensures that the mower can tackle various types of grass and terrain, making it suitable for a wide range of mowing conditions. The easy start technology allows users to get going quickly without the frustration of a traditional pull-start mechanism.

Another distinguishing characteristic of the Snapper MRP216015B is its 21-inch cutting deck. This size strikes a great balance between maneuverability and coverage, allowing users to cover large areas efficiently while still being able to navigate tight spaces. The steel construction of the deck provides durability, ensuring that the mower can withstand the rigors of regular use.

Additionally, the MRP216015B features a 3-in-1 mowing capability, enabling users to choose between mulching, bagging, or side discharge. This versatility allows for customization based on the specific needs and preferences of the user, whether they want to mulch for added fertilization or bag clippings for a cleaner finish.

The adjustable cutting height feature is another key technology that makes the Snapper MRP216015B stand out. With a simple lever adjustment, users can select from different cutting heights ranging from 1 to 4 inches. This adaptability ensures that the mower can handle different grass types and adapts to seasonal growth patterns effectively.

Comfort and convenience are paramount in the design of the MRP216015B. The ergonomic handle, equipped with cushioning, allows for extended operation without fatigue. Additionally, the foldable handle makes it easy to store the mower in smaller spaces when not in use.

In summary, the Snapper MRP216015B is a powerful, versatile, and user-friendly lawn mower. With its strong engine, durable cutting deck, and adaptable features, the MRP216015B is an excellent choice for anyone looking to achieve a well-manicured lawn efficiently and effectively.
Top Page Image Contents