Snapper MRP216015B important safety instructions Important Safety Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind and body and must not be under the influence of any substance, which might impair vision, dexterity or judgment. If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).

PROTECTION FOR CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

1.KEEP children out of the mowing area and under the watchful care of a responsible adult.

2.DO NOT allow children in yard when machine is operated and turn machine OFF if anyone enters the area.

3.DO NOT allow pre-teenage children to operate machine.

4.ALLOW only responsible adults & teenagers with mature judgment under close adult supervision to operate machine.

5.DO NOT pull mower backwards unless absolutely necessary. LOOK and SEE behind and down for children, pets and hazards before and while backing.

6.USE EXTRA CARE when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

SLOPE OPERATION

1.Slopes are a major factor related to slip and fall accidents, which can result in severe injury. All slopes require extra caution. If you feel uneasy on a slope, DO NOT mow it.

2.Mow across slopes, never up-and-down. Exercise extreme CAUTION when changing directions on slopes. DO NOT mow steep slopes or other areas where stability or traction is in doubt.

3.Use extra care with crass catchers or other attachments; these affect the handling and the stability of the machine.

PREPARATION

1.Read, understand, and follow instructions and warnings in this manual and on the mower, engine and attachments. Know the controls and the proper use of the mower before starting.

2.Only mature, responsible persons shall operate the machine and only after proper instruction.

PREPARATION

(Continued From Previous Column)

3.Data indicates that operators age 60 and above, are involved in a large percentage of mower- related injuries. These operators should evaluate their ability to operate the mower safely enough to protect themselves and others from serious injury.

4.Handle fuel with extra care. Fuels are flammable and vapors are explosive. Use only an approved fuel container. DO NOT remove fuel cap or add fuel with engine running. Add fuel outdoors only with engine stopped and cool. Clean spilled fuel and oil from machine. DO NOT smoke.

5.Check the area to be mowed and remove all objects such as toys, wire, rocks, limbs and other objects that could cause injury if thrown by blade or interfere with mowing. Also note the location of holes, stumps, and other possible hazards.

6.Keep people and pets out of the mowing area. Immediately, STOP Blade, Stop engine and Stop mower if anyone enters the area.

7.Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.

8.Make sure all safety decals are clearly legible. Replace if damaged.

9.Protect yourself when mowing and wear safety glasses, long pants and substantial footwear. DO NOT mow barefooted or with sandals.

10.Know how to STOP blade and engine quickly in preparation for emergencies.

11.Use extra care when loading or unloading the machine into a trailer or truck.

12.Check grass catcher components frequently for signs of wear or deterioration and replace as needed to prevent injury from thrown objects going through weak or torn spots.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Steel Deck Walk Mowers M Model Series Important Safety Instructions Operation Table of Contents Introduction NomenclaturePRE-START Check List Starting & Operation 2.2.1. Engine & BladeStopping Handle Height AdjustmentStarting & Operation Cutting Height Adjustment Recycling OperationOn Next Service After First 5 Hours 3.2.1. Change Engine OILCheck Grease Level in Transmission Check Mower Blade Service AnnuallyStorage Procedure Check Engine Drive BeltNinja Blade Wear Limit Mower Blade Replacement 4.1.1. Standard Blade Wear LimitBlade Sharpening Wheel Drive Control Adjustment Drive Spring Repair/Replacement Driven Disc ServiceCleaning Drive Disc & Driven Disc Driven Disc AdjustmentReplacing Rubber Driven Disc Ring Replacing Bearing In Driven Disc Assembly Belt Service Engine Drive Belt Replacement Stretch Type BeltsTransmission Poly-V Belt Replacement Pulley PositionTroubleshooting Problem Probable Cause Corrective ActionMAINTENANCE/REPLACEMENT Parts Service Performed EachClean Sponge Element Engine Manual 100Year Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Page Page Page Steel Deck Walk Behind Mowers M Model Series

MRP216015B specifications

The Snapper MRP216015B is a versatile and efficient lawn mower designed to provide exceptional performance for both residential and commercial gardening needs. As a part of Snapper’s trusted range of outdoor power equipment, the MRP216015B stands out for its innovative features and user-friendly technology.

One of the primary features of the MRP216015B is its robust 159cc OHV engine, which delivers reliable power and performance. This engine ensures that the mower can tackle various types of grass and terrain, making it suitable for a wide range of mowing conditions. The easy start technology allows users to get going quickly without the frustration of a traditional pull-start mechanism.

Another distinguishing characteristic of the Snapper MRP216015B is its 21-inch cutting deck. This size strikes a great balance between maneuverability and coverage, allowing users to cover large areas efficiently while still being able to navigate tight spaces. The steel construction of the deck provides durability, ensuring that the mower can withstand the rigors of regular use.

Additionally, the MRP216015B features a 3-in-1 mowing capability, enabling users to choose between mulching, bagging, or side discharge. This versatility allows for customization based on the specific needs and preferences of the user, whether they want to mulch for added fertilization or bag clippings for a cleaner finish.

The adjustable cutting height feature is another key technology that makes the Snapper MRP216015B stand out. With a simple lever adjustment, users can select from different cutting heights ranging from 1 to 4 inches. This adaptability ensures that the mower can handle different grass types and adapts to seasonal growth patterns effectively.

Comfort and convenience are paramount in the design of the MRP216015B. The ergonomic handle, equipped with cushioning, allows for extended operation without fatigue. Additionally, the foldable handle makes it easy to store the mower in smaller spaces when not in use.

In summary, the Snapper MRP216015B is a powerful, versatile, and user-friendly lawn mower. With its strong engine, durable cutting deck, and adaptable features, the MRP216015B is an excellent choice for anyone looking to achieve a well-manicured lawn efficiently and effectively.
Top Page Image Contents