Deck Removal | Snapper NZM19480KWV, NZM21520KWV specification

Section 4 - MAINTENANCE

WARNING

Allow engine to cool for at least ten minutes before performing service or maintenance. DO NOT smoke near fuel components when performing service or maintenance. DO NOT perform service and maintenance near an open flame. Wipe off any spilled fuel before starting engine. DO NOT run engine indoors.

4.5ANNUALLY (END OF EACH SEASON) (Continued from previous Page) 4.5.2. FUEL FILTER

Service fuel filter as instructed below. Turn key to “OFF” position. Engine MUST be stopped and MUST be cold before removing filter. Clamp fuel line to prevent fuel spillage or perform filter change when fuel tank and fuel line are empty.

1.Remove fuel line clamps from fuel filter.

2.Remove fuel lines from filter. Discard filter.

3.Install new fuel filter. IMPORTANT: Some fuel filters are fuel flow directional. Check for arrow that shows fuel flow direction. Reinstall fuel line clamps. See Figure 4.8.

LEFT SIDE OF

MACHINE

4.6DECK REMOVAL

Move power unit/mower deck to an area where the mower deck is to be disconnected. Turn engine “OFF” and remove key from switch. Remove spark plug wire(s) and secure away from spark plug(s). Move motion control levers to the neutral position. Engage parking brake.

1.Move deck lift lever and set the mower deck to the highest cutting position. See Figure 4.9.

2.IMPORTANT – STORED ENERGY. Relieve tension on deck lift assist spring by backing off nut on eyebolt. Failure to relive tension could result in personal injury. See Figure 4.9.

3.Place a wooden block under the front and rear edge of the mower deck.

4.Move deck lift lever and set the mower deck to a lower cutting position until deck rests on wooden blocks. Position the deck to where there is no tension on the deck hanger chains. See Figure 4.9.

LOWEST CUTTING

POSITION (ALL THE

WAY FORWARD)

POSITION DECK LIFT LEVER IN HIGHEST CUTTING POSITION. PLACE WOODEN BLOCKS UNDER FRONT AND REAR OF DECK. LOWER DECK ONTO

CLAMP FUEL LINE	LOOSEN DECK
CLAMP FUEL LINE	LIFT ASSIST
TO PREVENT	SPRING
SPILLAGE

REMOVE

FUEL FILTER

	CLAMP FUEL	FIGURE 4.9

REMOVE LINE	LINE TO

	PREVENT
CLAMPS		(Continued On Next Page)
	SPILLAGE

FIGURE 4.8

NZM19480KWV, NZM21520KWV specifications

The Snapper NZM19480KWV and NZM21520KWV are standout offerings in the realm of robust mowers, designed to cater to both residential and commercial users seeking efficiency and versatility. These models embody Snapper’s commitment to quality engineering and innovative features that simplify the mowing experience while delivering exceptional performance.

At the heart of both models is a powerful engine, ensuring reliable operation even in the most challenging terrains. The NZM19480KWV features a robust 48-inch cutting deck that allows for a wider cutting path, significantly reducing mowing time. This makes it an optimal choice for larger lawns and landscapes. In contrast, the NZM21520KWV showcases a slightly smaller but efficient 52-inch deck, ideal for tackling intricate yard designs while maintaining maneuverability.

Both mowers are equipped with Snapper's unique Pivoting Front Axle technology, which enhances stability and control. This feature allows the mower to navigate uneven ground smoothly, ensuring a consistent cut regardless of the terrain. The optimized weight distribution contributes to improved traction and handling, making both models suitable for diverse mowing conditions.

The user-friendly design of these mowers is another highlight. They feature a comfortable, adjustable seat with easy-grip controls, allowing operators to navigate their lawns with ease. Additionally, the intuitive dashboard provides real-time information regarding engine performance and fuel levels, enhancing the mowing experience and ensuring that users can focus on achieving the best results.

One of the standout technologies employed in the Snapper NZM19480KWV and NZM21520KWV is the electric start feature. This innovation eliminates the hassle of manual starting, allowing users to begin mowing with the push of a button. Furthermore, both models come with a robust transmission system that ensures smooth acceleration and responsive handling.

In summary, the Snapper NZM19480KWV and NZM21520KWV are exemplary choices for anyone seeking reliable, durable, and efficient mowers. With powerful engines, advanced technologies, and user-friendly designs, these models not only streamline the mowing process but also ensure a pristine lawn appearance. Whether for residential gardening or commercial landscaping, Snapper’s engineering excellence stands out.