Snapper NZM19481KWV important safety instructions Important Safety Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind and body and must not be under the influence of any substance, which might impair vision, dexterity or judgment. If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).

PROTECTION FOR CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

1.KEEP children out of the mowing area and under the watchful care of a responsible adult.

2.DO NOT allow children in yard when machine is operated (even with the blades OFF).

3.DO NOT allow children or others to ride on machine, attachments or towed equipment (even with the blades OFF). They may fall and be seriously injured.

4.DO NOT allow pre-teenage children to operate machine. Local regulations may restrict the age of the operator.

5.ALLOW only adults or responsible teenagers with mature judgment under close adult supervision to operate machine.

6.DO NOT operate blades in reverse. STOP BLADES. LOOK and SEE behind and down for children, pets and hazards before and while backing.

7.USE EXTRA CARE when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

PROTECTION AGAINST TIPOVERS

Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra CAUTION. If you cannot back up the slope or if you feel uneasy on the slope, DO NOT mow it. Use extra care with grass catchers or other attachments; these and turf conditions affect the handling and the stability of the machine.

1.DO NOT operate machine on slopes exceeding 15 degrees (27% grade).

2.Exercise EXTREME CAUTION on slopes above 10 degrees (18% grade). Turn blades OFF when traveling uphill. Use a slow speed and avoid sudden or sharp turns.

3.DO NOT operate machine back and forth across face of slopes. Operate up and down. Practice on slopes with blades off.

PROTECTION AGAINST TIPOVERS

(Continued From Previous Column)

4.AVOID starting, stopping or turning on slopes. If machine stops going uphill or tires lose traction, turn blades OFF and back slowly straight down the slope.

5.STAY ALERT for holes and other hidden hazards. Tall grass can hide obstacles. Keep away from ditches, washouts, culverts, fences and protruding objects.

6.DO NOT operate machine near drop offs, ditches, embankments, washouts, culverts, fences and protruding objects. KEEP A SAFE DISTANCE (at least 3 feet) away from edge of ditches and other drop offs. The machine could turn over if an edge caves in.

7.Always begin forward motion slowly and with caution.

8.Use weights or a weighted load carrier in accordance with instructions supplied with a grass catcher. DO NOT operate machine on slopes exceeding 10 degrees (18% grade) when equipped with grass catcher.

9.DO NOT put your foot on the ground to try to stabilize the machine.

10.DO NOT operate machine on wet grass. Reduced traction could cause sliding.

11.Chose a low enough ground speed setting so that you will not have to stop or shift on a slope. Tires may lose traction on slopes even though the brakes are functioning properly.

12.DO NOT operate machine under any condition where traction, steering or stability is doubtful.

13.Always keep machine in gear when going down slopes. DO NOT shift to neutral (or actuate hydro roll release) and coast downhill.

14.Operator Protective Structures are available for this machine through your local SNAPPER dealer.

PREPARATION

1.Read, understand and follow instructions and warnings in this manual and on the machine, engine and attachments. Know the controls, the safety signs and the proper use of the machine before starting. If the operators or mechanics cannot read English, it is the owner’s responsibility to explain this material to them.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents MID Mount Z-RIDER Zero Turning Hydro Drive Series Important Safety Instructions From Previous SnapperMaintenance Table of Contents Introduction NomenclatureSafety Messages and Symbols RUN Operating Instructions PRE-START Check ListStarting & Stopping ENGINE, BLADES, Parking Brake Starting EngineStopping Mower Blades Stopping EngineStarting Mower Blades Parking BrakeCutting Height Adjustment OPERATION- Motion Controls Driving MachineEngine should Start if Stopping MachineEngine Must not Start if Engine Must Begin to Stop ifService After First 5 Hours Check Mower BladeAfter Every 25 Operating Hours 4.3.1. Engine Annually END of Each Season Riding Mower LubricationBefore Operating Machine Deck Removal See Figure Adjustments & Repair Neutral Position AdjustmentsNeutral Position Adjustments From Previous Parking Brake Adjustment Highest cutting position and recheck side to sideTraction Belt Replacement Traction Belt TensionBelt Removal Tracking Adjustment Mower Drive Belt ReplacementBelt Replacement Blade Sharpening Battery Service 1. Remove battery Battery Battery RemovalBattery Installation Do not Overfill Battery TestingNEW Battery Preparation 1. Remove battery from carton Bearing Replacement Insert spindle shaft up through the bottomHydraulic SYSTEM, Purging Corrective Action Problem Probable CauseTrouble Shooting on Next Machine Will Not Move 100 Service Performed EachMAINTENANCE/REPLACEMENT Parts Number USE HRS SeasonYear Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Page MID Mount Z-RIDER Zero Turning Hydro Drive Series

NZM19481KWV specifications

The Snapper NZM19481KWV is a robust and versatile ride-on lawn mower that offers exceptional performance and efficiency for various residential and commercial landscaping needs. Engineered for precision and durability, this model is a popular choice among lawn care enthusiasts looking to maintain their outdoor space with ease.

One of the standout features of the Snapper NZM19481KWV is its powerful engine. Equipped with a reliable Briggs & Stratton engine, the mower delivers ample power to tackle even the toughest grass conditions. The engine's high torque ensures that the mower can handle hilly terrains and thick grass without compromising performance. Additionally, the engine meets stringent emissions standards, making it an environmentally friendly choice.

The cutting deck on the NZM19481KWV is another highlight. It boasts a 48-inch fabricated cutting deck, which provides a wide cutting path for faster mowing. The deck's design ensures superior airflow, resulting in a finer and more consistent cut. Users can easily adjust the cutting height with a simple lever, allowing for a customized mowing experience suited to various grass types and conditions.

This mower employs innovative technologies that add to its appeal. The AutoShift transmission allows for smooth and effortless gear changes, enabling users to maintain optimal speed regardless of terrain. Coupled with responsive steering, the Snapper NZM19481KWV provides excellent maneuverability, making it ideal for navigating tight spaces and complex landscapes.

Comfort is also a priority with the Snapper NZM19481KWV. The mower features an ergonomic seat with ample cushioning and adjustable armrests, ensuring a comfortable mowing experience even during extended use. The user-friendly controls are intuitively placed, allowing for easy operation without taking your focus off the mowing task at hand.

In terms of maintenance, the Snapper NZM19481KWV is designed for convenience. Its accessible engine and easy-to-remove cutting deck simplify routine tasks, such as oil changes and blade sharpening. The molded fender and deck prevent rust, prolonging the lifespan of the mower.

Overall, the Snapper NZM19481KWV combines performance, technology, and comfort, making it a worthwhile investment for anyone seeking to achieve a pristine lawn. Whether for home use or commercial landscaping, this ride-on mower stands out with its comprehensive features designed to deliver exceptional results.
Top Page Image Contents