Snapper NZM19481KWV important safety instructions Machine Will Not Move

Page 30

TROUBLESHOOTING

PROBLEM

 

PROBABLE CAUSE

Machine Will Not Move

1.

Motion Control Levers in the neutral “N” position.

Loss Of Traction

2.

Hydro. Pumps in roll release setting.

3.Low transmission hydraulic oil level.

4.Parking Brake engaged.

5.Traction drive belt requires replacement.

Blade(s) Not Cutting 1. Blade engagement switch in the “OFF” position.

2.Clutch belt slipping.

3.Mower belt slipping.

4.Electric clutch not functioning.

Cutting Grass 1. Uneven tire pressure.

Improperly

2. Cutting height too low or high.

 

3.

Engine speed too slow.

 

4.

Forward speed too fast.

 

5.

Terraced cut, side to side.

 

6.

Excessive deck pitch, front to rear.

 

7.

Cutting blade(s) dull or damaged.

 

8.

Blade belt slipping.

 

9.

Check electric clutch.

 

10. Check clutch belt.

 

11. Check gearbox for damage.

Poor Grass Discharge

1. Engine speed too slow.

 

2.

Forward speed too fast.

 

3.

Grass is wet.

 

4.

Excessively worn or damaged blade(s).

 

5.

Build up of grass clippings and debris under deck.

 

6.

Improper blade(s) installed on deck.

 

7.

Blade(s) installed improperly on deck.

Battery Will Not Charge

1. Poor cable connections.

 

2.

Bad battery cell(s).

 

3.

Faulty alternator.

CORRECTIVE ACTION

1.Move Motion Controls to desired speed

2.Tighten relief valves.

3.Bring hydraulic oil to proper level.

4.Move parking brake to disengaged position.

5.Replace traction drive belt.

1.Move blade switch to the “ON” position.

2.Replace clutch belt.

3.Replace mower belt.

4.Contact authorized SNAPPER dealer.

1.Bring to proper pressure.

2.Adjust cutting height.

3.Move throttle control to “FAST” position.

4.Move joystick to a slower speed.

5.Adjust side to side level.

6.Adjust front to rear level.

7.Sharpen cutting edges or replace blade(s).

8.Replace blade belt.

9.Adjust to proper specifications.

10.Replace clutch belt.

11.Contact authorized SNAPPER dealer.

1.Move throttle control to “FAST” position.

2.Move joystick to a slower speed.

3.Mow when grass is dry.

4.Service mower blade(s).

5.Clean deck.

6.Install proper SNAPPER blades.

7.Install blades properly.

1.Clean cables and battery terminals.

2.Replace with new battery.

3.Contact engine manufacturer’s dealer.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents MID Mount Z-RIDER Zero Turning Hydro Drive Series Important Safety Instructions From Previous SnapperMaintenance Table of Contents Introduction NomenclatureSafety Messages and Symbols RUN Operating Instructions PRE-START Check ListStarting & Stopping ENGINE, BLADES, Parking Brake Starting EngineStopping Mower Blades Stopping EngineStarting Mower Blades Parking BrakeCutting Height Adjustment OPERATION- Motion Controls Driving MachineEngine should Start if Stopping MachineEngine Must not Start if Engine Must Begin to Stop ifService After First 5 Hours Check Mower BladeAfter Every 25 Operating Hours 4.3.1. Engine Riding Mower Lubrication Before Operating MachineAnnually END of Each Season Deck Removal See Figure Adjustments & Repair Neutral Position AdjustmentsNeutral Position Adjustments From Previous Parking Brake Adjustment Highest cutting position and recheck side to sideTraction Belt Replacement Traction Belt TensionTracking Adjustment Mower Drive Belt Replacement Belt ReplacementBelt Removal Blade Sharpening Battery Battery Removal Battery InstallationBattery Service 1. Remove battery Battery Testing NEW Battery Preparation 1. Remove battery from cartonDo not Overfill Bearing Replacement Insert spindle shaft up through the bottomHydraulic SYSTEM, Purging Problem Probable Cause Trouble Shooting on NextCorrective Action Machine Will Not Move 100 Service Performed EachMAINTENANCE/REPLACEMENT Parts Number USE HRS SeasonYear Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page Page MID Mount Z-RIDER Zero Turning Hydro Drive Series

NZM19481KWV specifications

The Snapper NZM19481KWV is a robust and versatile ride-on lawn mower that offers exceptional performance and efficiency for various residential and commercial landscaping needs. Engineered for precision and durability, this model is a popular choice among lawn care enthusiasts looking to maintain their outdoor space with ease.

One of the standout features of the Snapper NZM19481KWV is its powerful engine. Equipped with a reliable Briggs & Stratton engine, the mower delivers ample power to tackle even the toughest grass conditions. The engine's high torque ensures that the mower can handle hilly terrains and thick grass without compromising performance. Additionally, the engine meets stringent emissions standards, making it an environmentally friendly choice.

The cutting deck on the NZM19481KWV is another highlight. It boasts a 48-inch fabricated cutting deck, which provides a wide cutting path for faster mowing. The deck's design ensures superior airflow, resulting in a finer and more consistent cut. Users can easily adjust the cutting height with a simple lever, allowing for a customized mowing experience suited to various grass types and conditions.

This mower employs innovative technologies that add to its appeal. The AutoShift transmission allows for smooth and effortless gear changes, enabling users to maintain optimal speed regardless of terrain. Coupled with responsive steering, the Snapper NZM19481KWV provides excellent maneuverability, making it ideal for navigating tight spaces and complex landscapes.

Comfort is also a priority with the Snapper NZM19481KWV. The mower features an ergonomic seat with ample cushioning and adjustable armrests, ensuring a comfortable mowing experience even during extended use. The user-friendly controls are intuitively placed, allowing for easy operation without taking your focus off the mowing task at hand.

In terms of maintenance, the Snapper NZM19481KWV is designed for convenience. Its accessible engine and easy-to-remove cutting deck simplify routine tasks, such as oil changes and blade sharpening. The molded fender and deck prevent rust, prolonging the lifespan of the mower.

Overall, the Snapper NZM19481KWV combines performance, technology, and comfort, making it a worthwhile investment for anyone seeking to achieve a pristine lawn. Whether for home use or commercial landscaping, this ride-on mower stands out with its comprehensive features designed to deliver exceptional results.
Top Page Image Contents