Snapper RZT185380BVE, RZT20380KH, RZT20420BVE2 manual Installation

Page 16

4.Remove the hairpin clips (D, Figure 11) and clevis pins (C) securing the rear deck brackets (A) to the rear hanger arms (B).

5.Remove the hairpin clips (C, Figure 12) from the front hanger bar (A) and slide the washers (D) in away from the front deck bracket (B). Retain all removed hardware.

6.Slide the mower deck forward slightly and unhook the front hanger bar (A, Figure 12) from the slots in the front deck bracket.

7.Pivot the front wheels out of the way and slide the mower deck out from under the unit.

Installation

1.Disengage the PTO, lock the motion control levers into their neutral lock positions, turn off the ignition, remove the key, and wait for all moving parts to stop.

2.Lower the height adjustment lever to its lowest posi- tion. See “CUTTING HEIGHT ADJUSTMENT”.

3.Pivot the front wheels out of the way and slide the mower deck under the unit. Place a 2 x 4 or similar support under the mower deck.

4.Hook the front hanger bar (A, Figure 12) into the slots in the front deck bracket (B).

Note: Make sure the two hanger bar washers (D) are located inside the front deck bracket.

5.Slide one washer (D) against the inside of each side of the front deck bracket (B), and install the retained hairpin clips (C) into the holes in the front hanger bar

6.Align the rear deck brackets (A, Figure 11) between the rear hanger arms (B), then install the clevis pins

(C)and hairpin clips (D) retained from deck removal.

Note: Install the clevis pins through the top set of holes in the rear deck brackets.

7.Pull back on the tensioning idler (D, Figure 10) in the direction indicated, and install the belt onto the PTO pulley as shown in Figure 10.

Important: Be sure the belt is installed properly onto all pulleys.

Operation

B

D

A

C

Figure 11. Rear Deck Lift Components (Belt Removed For Clarity)

A.Rear Deck Brackets

B.Rear Hanger Arms

C.Clevis Pin (2)

D.Hairpin Clip (2)

D

A

C

B

Figure 12. Front Deck Lift Components

A.Front Hanger Bar

B.Front Deck Bracket

C.Hairpin Clip (2)

D.Washer (2)

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents OPERATOR’S Manual Table of Contents Safety Rules & Information Safety Rules and Information From PreviousTowing Identification Numbers SnapperModels SimplicitySafety Decals Safety DecalsSafety Interlock System Operational Safety ChecksMotion Control Levers Control FunctionsChoke Features & Controls General Operating Safety Checks Before StartingOperation Starting the EngineStopping the Rider & Engine MowingZero Turn Driving Practice Smooth TravelForward Travel Practice Reverse Travel PracticePractice Turning Around a Corner Executing an End-Of-Row Zero TurnAttaching a Trailer Mower Removal InstallationRemoval Installation Regular Maintenance Before Every Spring Each Hours 100 250 Fall UseRegular Maintenance LubricationBlade Removal Service Interval Every 10 Hours or As Required Servicing the Mower BladesEngine Maintenance Check Tire PressuresChecking / Adding Fuel Fuel FilterCleaning the Battery and Cables Battery MaintenanceStorage Troubleshooting, Adjustments, & Service Troubleshooting the RiderTroubleshooting, Adjustments, & Service Troubleshooting the MowerSeat Adjustments Motion Control Lever AdjustmentSpeed Balancing Adjustment Seat Position AdjustmentCutting Height Adjustment Motion Control Lever Friction AdjustmentRoller BAR Adjustment Neutral Adjustments Front Suspension Adjustment Select Models Parking Brake AdjustmentBrake Adjustment PTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Orient Blades Side-to-SideRoller BAR Leveling If EquippedTransmission Drive Belt Replacement Battery ChargingMower Belt Replacement PRY Belts Over PulleysFuse Replacement Dimensions EngineChassis TransmissionsMaintenance Items Replacement PartsTechnical Manuals

RZT185380BVE, RZT20380KH, RZT20420BVE2 specifications

The Snapper RZT20420BVE2, RZT20380KH, and RZT185380BVE are three standout models in the Snapper line of zero-turn riding mowers, designed for both residential and commercial use. Each of these mowers combines advanced technology, robust engineering, and user-friendly features to deliver a reliable lawn care experience.

The Snapper RZT20420BVE2 is a high-performance model equipped with a powerful 20 HP Kawasaki engine. This unit features a 42-inch cutting deck that enables smooth and efficient mowing for medium to large lawns. One of its key characteristics is the commercial-grade, heavy-duty construction, which ensures durability and longevity. The mower is also designed with a zero-turn radius, allowing for exceptional maneuverability around obstacles and tight spaces, making it ideal for complex lawn designs.

The RZT20380KH model offers a slightly smaller and versatile option with an 18.5 HP Kohler engine. It features a 38-inch cutting deck, providing an effective cut for smaller lawns or areas with numerous landscaping features. The adjustable cutting height ensures a customizable mowing experience, catering to various grass types and growth conditions. The mower's integrated dual hydrostatic transmission provides smooth operation and enhances control, making it easy for users to navigate around flower beds and shrubs.

The Snapper RZT185380BVE model stands out for its exceptional power and efficiency, equipped with a robust 18 HP Briggs & Stratton engine. With a 38-inch deck, it's perfect for homeowners looking for a balance of performance and ease of use. This mower is engineered with a user-friendly operation panel, making it easy for operators to control speed and cutting height. The RZT185380BVE also features Snapper’s innovative mow-in-reverse capability, which allows mowing while reversing, increasing efficiency.

Across these models, Snapper emphasizes comfort and ease of use. They are equipped with plush, high-back seats for added support during extended mowing sessions, as well as lap bars that allow fine control and increased maneuverability. The addition of LED headlights in certain models improves visibility for early morning or late evening mowing.

Each of these Snapper mowers showcases advanced engineering and design tailored to meet diverse lawn care needs. With their impressive performance characteristics, ease of operation, and durable build, the Snapper RZT20420BVE2, RZT20380KH, and RZT185380BVE are excellent choices for anyone looking to maintain a pristine lawn.
Top Page Image Contents