Check Tire Pressures, Checking / Adding Fuel

CHECK TIRE PRESSURES

Tire pressure should be checked periodically, and main- tained at the levels shown in the chart. Note that these pressures may differ slightly from the “Max Inflation” stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life.

CHECKING / ADDING FUEL

To add fuel:

1.Remove the fuel cap.

2.Fill the tank to the bottom of the filler neck. This will allow for fuel expansion.

NOTE: Do not overfill. Refer to your engine manual for specific fuel recommendations.

3. Install and hand tighten the fuel cap.

FUEL FILTER

The fuel filter is located in the fuel line between fuel tank and fuel pump. If the filter is dirty or clogged, replace as follows:

1.Shut off the fuel valve (A, Figure 18).

2.Disconnect the negative battery cable.

3.Place a container below the filter to catch spilled fuel.

4.Using pliers, open and slide hose clamps from fuel fil- ter (B, Figure 18).

5.Remove hoses from filter.

6.Install new filter in proper flow direction in fuel line.

7.Secure with hose clamps.

8.Reconnect the negative battery cable when finished.

ENGINE MAINTENANCE

Refer to engine owners manual for all engine mainte- nance procedures and recommendations.

Regular Maintenance


Tire	Pressure
Front	25 psi (1,72 bar)

Rear	15 psi (1,03 bar)

Figure 17. Checking Tire Pressure

WARNING

Gasoline is highly flammable and must be handled with care. Never fill the tank when the engine is still hot from recent operation. Do not allow open flame, smoking or matches in the area. Avoid over-filling and wipe up any spills.

Do not remove fuel filter when engine is hot, as spilled gasoline may ignite. DO NOT spread hose clamps further than necessary. Ensure clamps grip hoses firmly over filter after installation.

Do not use gasoline containing METHANOL, gasohol containing more than 10% ethanol, gasoline additives, premium gasoline, or white gas because engine/fuel system damage could result.

Figure 18. Fuel Valve Replacement

(View looking back from battery compartment)

A.Fuel Valve

B.Fuel Filter

RZT185380BVE, RZT20380KH, RZT20420BVE2 specifications

The Snapper RZT20420BVE2, RZT20380KH, and RZT185380BVE are three standout models in the Snapper line of zero-turn riding mowers, designed for both residential and commercial use. Each of these mowers combines advanced technology, robust engineering, and user-friendly features to deliver a reliable lawn care experience.

The Snapper RZT20420BVE2 is a high-performance model equipped with a powerful 20 HP Kawasaki engine. This unit features a 42-inch cutting deck that enables smooth and efficient mowing for medium to large lawns. One of its key characteristics is the commercial-grade, heavy-duty construction, which ensures durability and longevity. The mower is also designed with a zero-turn radius, allowing for exceptional maneuverability around obstacles and tight spaces, making it ideal for complex lawn designs.

The RZT20380KH model offers a slightly smaller and versatile option with an 18.5 HP Kohler engine. It features a 38-inch cutting deck, providing an effective cut for smaller lawns or areas with numerous landscaping features. The adjustable cutting height ensures a customizable mowing experience, catering to various grass types and growth conditions. The mower's integrated dual hydrostatic transmission provides smooth operation and enhances control, making it easy for users to navigate around flower beds and shrubs.

The Snapper RZT185380BVE model stands out for its exceptional power and efficiency, equipped with a robust 18 HP Briggs & Stratton engine. With a 38-inch deck, it's perfect for homeowners looking for a balance of performance and ease of use. This mower is engineered with a user-friendly operation panel, making it easy for operators to control speed and cutting height. The RZT185380BVE also features Snapper’s innovative mow-in-reverse capability, which allows mowing while reversing, increasing efficiency.

Across these models, Snapper emphasizes comfort and ease of use. They are equipped with plush, high-back seats for added support during extended mowing sessions, as well as lap bars that allow fine control and increased maneuverability. The addition of LED headlights in certain models improves visibility for early morning or late evening mowing.

Each of these Snapper mowers showcases advanced engineering and design tailored to meet diverse lawn care needs. With their impressive performance characteristics, ease of operation, and durable build, the Snapper RZT20420BVE2, RZT20380KH, and RZT185380BVE are excellent choices for anyone looking to maintain a pristine lawn.