Snapper RZT20380KH, RZT185380BVE, RZT20420BVE2 manual Safety Rules & Information

Page 3

Safety Rules & Information

!

IMPORTANT SAFETY INSTRUCTIONS

!

WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only per- sons who understand these instructions to operate machine. Each person operating the machine must be of sound mind and body and must not be under the influence of any substance, which might impair vision, dexterity or judgment. If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER Products Inc., McDonough, Georgia 30253. Phone: (1-800-935-2967).

PROTECTION FOR CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine. Never assume that children will remain where you last saw them.

1.KEEP children out of the mowing area and under the watch- ful care of a responsible adult other than the operator.

2.DO NOT allow children in yard when machine is operated (even with the blade OFF).

3.DO NOT allow children or others to ride on machine, attach- ments or towed equipment (even with the blades OFF). They may fall and be seriously injured.

4.DO NOT allow pre-teenage children to operate machine.

5.ALLOW only responsible adults & teenagers with mature judgment under close adult supervision to operate machine.

6.DO NOT operate blades in reverse. STOP BLADES. LOOK and SEE behind and down for children, pets and hazards before and while backing.

7.USE EXTRA CARE when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

PROTECTION AGAINST TIPOVERS

Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra CAUTION. If you cannot back up the slope or if you feel uneasy on the slope, DO NOT mow it. Use extra care with grass catchers or other attachments; these affect the handling and the stability of the machine.

1.DO NOT operate machine on slopes exceeding 15 degrees (27% grade).

2.Exercise EXTREME CAUTION on slopes above 10 degrees (18% grade). Turn blades OFF when traveling uphill. Use a slow speed and avoid sudden or sharp turns.

3.DO NOT operate machine back and forth across face of slopes. Operate up and down. Practice on slopes with blades off.

4.AVOID starting, stopping or turning on slopes. If machine stops going uphill or tires lose traction, turn blades OFF and back slowly straight down the slope.

PROTECTION AGAINST TIPOVERS

(Continued From Previous Column)

5.STAY ALERT for holes and other hidden hazards. Tall grass can hide obstacles. Keep away from ditches, washouts, cul- verts, fences and protruding objects.

6.KEEP A SAFE DISTANCE (at least 3 feet) away from edge of ditches and other drop offs. The machine could turn over if an edge caves in.

7.Always begin forward motion slowly and with caution.

8.Use weights or a weighted load carrier in accordance with instructions supplied with a grass catcher. DO NOT operate machine on slopes exceeding 10 degrees (18% grade) when equipped with grass catcher.

9.DO NOT put your foot on the ground to try to stabilize the machine.

10.DO NOT operate machine on wet grass. Reduced traction could cause sliding.

11.Chose a low enough speed setting so that you will not have to stop or shift on a slope. Tires may lose traction on slopes even though the brakes are functioning properly.

12.DO NOT operate machine under any condition where trac- tion, steering or stability is doubtful.

13.Always keep the machine in gear when going down slopes. DO NOT shift to neutral (or actuate hydro roll release) and coast downhill.

PREPARATION

1.Read, understand, and follow instructions and warnings in this manual and on the machine, engine and attachments. Know the controls and the proper use of the machine before starting.

2.Only mature, responsible persons shall operate the machine and only after proper instruction.

3.Data indicates that operators age 60 and above, are involved in a large percentage of mower-related injuries. These opera- tors should evaluate their ability to operate the mower safely enough to protect themselves and others from serious injury.

4.Handle fuel with extra care. Fuels are flammable and vapors are explosive. Use only an approved fuel container. DO NOT remove fuel cap or add fuel with engine running. Add fuel outdoors only with engine stopped and cool. Clean spilled fuel from machine. DO NOT smoke.

5.Practice operation of machine with BLADES OFF to learn controls and develop skills.

2

Image 3
Contents OPERATOR’S Manual Table of Contents Safety Rules & Information From Previous Safety Rules and InformationTowing Simplicity Identification NumbersSnapper ModelsSafety Decals Safety DecalsOperational Safety Checks Safety Interlock SystemControl Functions Motion Control LeversChoke Features & Controls Checks Before Starting General Operating SafetyMowing OperationStarting the Engine Stopping the Rider & EngineReverse Travel Practice Zero Turn Driving PracticeSmooth Travel Forward Travel PracticeExecuting an End-Of-Row Zero Turn Practice Turning Around a CornerMower Removal Installation Attaching a TrailerRemoval Installation Before Every Spring Each Hours 100 250 Fall Use Regular MaintenanceLubrication Regular MaintenanceServicing the Mower Blades Blade Removal Service Interval Every 10 Hours or As RequiredFuel Filter Engine MaintenanceCheck Tire Pressures Checking / Adding FuelBattery Maintenance Cleaning the Battery and CablesStorage Troubleshooting the Rider Troubleshooting, Adjustments, & ServiceTroubleshooting the Mower Troubleshooting, Adjustments, & ServiceSeat Position Adjustment Seat AdjustmentsMotion Control Lever Adjustment Speed Balancing AdjustmentMotion Control Lever Friction Adjustment Cutting Height AdjustmentRoller BAR Adjustment Neutral Adjustments Parking Brake Adjustment Front Suspension Adjustment Select ModelsBrake Adjustment Blade Brake Check PTO Clutch AdjustmentOrient Blades Side-to-Side Mower Deck LevelingIf Equipped Roller BAR LevelingBattery Charging Transmission Drive Belt ReplacementPRY Belts Over Pulleys Mower Belt ReplacementFuse Replacement Transmissions DimensionsEngine ChassisReplacement Parts Maintenance ItemsTechnical Manuals

RZT185380BVE, RZT20380KH, RZT20420BVE2 specifications

The Snapper RZT20420BVE2, RZT20380KH, and RZT185380BVE are three standout models in the Snapper line of zero-turn riding mowers, designed for both residential and commercial use. Each of these mowers combines advanced technology, robust engineering, and user-friendly features to deliver a reliable lawn care experience.

The Snapper RZT20420BVE2 is a high-performance model equipped with a powerful 20 HP Kawasaki engine. This unit features a 42-inch cutting deck that enables smooth and efficient mowing for medium to large lawns. One of its key characteristics is the commercial-grade, heavy-duty construction, which ensures durability and longevity. The mower is also designed with a zero-turn radius, allowing for exceptional maneuverability around obstacles and tight spaces, making it ideal for complex lawn designs.

The RZT20380KH model offers a slightly smaller and versatile option with an 18.5 HP Kohler engine. It features a 38-inch cutting deck, providing an effective cut for smaller lawns or areas with numerous landscaping features. The adjustable cutting height ensures a customizable mowing experience, catering to various grass types and growth conditions. The mower's integrated dual hydrostatic transmission provides smooth operation and enhances control, making it easy for users to navigate around flower beds and shrubs.

The Snapper RZT185380BVE model stands out for its exceptional power and efficiency, equipped with a robust 18 HP Briggs & Stratton engine. With a 38-inch deck, it's perfect for homeowners looking for a balance of performance and ease of use. This mower is engineered with a user-friendly operation panel, making it easy for operators to control speed and cutting height. The RZT185380BVE also features Snapper’s innovative mow-in-reverse capability, which allows mowing while reversing, increasing efficiency.

Across these models, Snapper emphasizes comfort and ease of use. They are equipped with plush, high-back seats for added support during extended mowing sessions, as well as lap bars that allow fine control and increased maneuverability. The addition of LED headlights in certain models improves visibility for early morning or late evening mowing.

Each of these Snapper mowers showcases advanced engineering and design tailored to meet diverse lawn care needs. With their impressive performance characteristics, ease of operation, and durable build, the Snapper RZT20420BVE2, RZT20380KH, and RZT185380BVE are excellent choices for anyone looking to maintain a pristine lawn.