SECTION 4 - SERVICE
TRACTION LEVERS
Lubricate each with
INTERLOCK SWITCHES Inspect switches for ease of operation
HYDRAULIC | OIL |
|
| |
Use SAE |
| |||
HYDRAULIC | FILTER |
| ||
Change Hydraulic Oil and Filter |
| |||
after first 25 hours of operation. |
| |||
Thereafter, | change | Hyd_ |
| |
and Filter | every 200 | hours | *_ | |
(monthly). |
|
|
|
|
MOTOR HUBS - Lubricate
Motor Hubs with
Compound when replacing
Wheel Hubs.
DEFLECTOR
Lubricate hinge points as required.
HYDRAULIC HOSES & FITTINGS Check daily for leaks, cracks, kinks, and other signs of wear.
MOWING DECK
At end of each mowing period, remove grass and debris from
under mowing deck and above rear SAFETY Shield.
& LUBRICATION INFORMATION
|
| ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, |
|
|
| ||
|
| (Not Illustrated) |
|
CONTROLS | & LINKAGES | Replace every | 100 |
Before each | mowing period, coat all wear | = | • |
points, hinge points and sliding parts with |
|
| |
medium duty oil. |
|
| |
ENGINE
Change Oil Fi{ter after first 5 hours of operation. Change engine oil every 25 hours under normal conditions or daily under extreme dusty conditions. Change Filter every 50 hours of operation.
Clean AIR FILTER Foam Element every 25 hours Service PAPER ELEMENT every 100 hours.
REAR TIRES - Check tire pressure before each mowing period, inflate to
, CUTTER SHAFT
FSPINDLES
Lubricate each with two
(2) SHOTS of bearing grease daily
CUTTER DECK
BELT(S)
Check for cracks _)r wear.
FRONT WHEEL BUSHINGS & CASTER SHAFTS
Lubricate with bearing grease weekly.
MOWER BLADES
Check for tightness every 25 hours of operation Tighten capscrews to 75 foot pounds.
FRONT TIRES
Check tire pressure before
each mowing period. Inflate to 25 PSI
FIGURE 4.1
19