Snapper Z-Mow / 150Z manual Maintenance Schedule, Rider MAINTENANCE, All Models

MAINTENANCE

MAINTENANCE SCHEDULE

The following schedules should be followed for normal care of your rider and mower.

RIDER MAINTENANCE, All Models	Before	Spring	8	25	100	200	Yearly
	Each Use	& Fall	Hours	Hours	Hours	Hours
Clean Debris from Rider and Engine Compartment *	•
Clean Debris from Engine Cooling Areas & Air Filter *	•
Check Tire Pressure				•
Lubricate Rider & Mower *				•
Clean Deck & Check/Replace Mower Blades				•
Clean Battery & Cables					•
Check Rider Safety System **		•			•		•
Check / Adjust PTO Clutch						•

ENGINE MAINTENANCE,	8 Hours	25 Hours	50 Hours	100 Hours	200 Hours or	Yearly
18.5HP Briggs & Stratton	or Daily	or Every	or Every	or Every	Every Season
		Season	Season	Season
Check Engine Oil Level *	•
Service Air Pre-Cleaner *		•
Change Oil *			•
Service Air Filter *			•
Change Oil & Filter *				•
Clean Cooling Fins *				•
Replace Air Filter *					•
Replace Spark Plugs						•
Replace Fuel Filter †						•
Check Valve Clearance †						•

*More often in hot (over 85° F: 30° C) weather or dusty operating conditions.

**Check the function of the safety system after the unit has been stored for 30 days or longer.

† These services should be performed by a qualified service dealer.

15