Engine, Chassis, Transmission, Dimensions

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

*The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision 2002–05). Given both the wide

array of products on which our engines are placed, and the variety of environmental issues applicable to operating the equipment, it may be that the engine you have purchased will not develop the rated horsepower when used in a piece of power equipment (actual “on–site” power). This difference is due to a variety of factors including, but not limited to, the following: differences in altitude, temperature, barometric pressure, humidity, fuel, engine lubrication, maximum governed engine speed, individual engine to engine variability, design of the particular piece of power equipment, the manner in which the engine is operated, engine run–in to reduce friction and clean out of combustion chambers, adjustments to the valves and carburetor, and other factors. The power ratings may also be adjusted based on com- parisons to other similar engines utilized in similar applications, and will therefore not necessarily match the values derived using the foregoing codes.

ENGINE:

18.5 HP* Briggs & Stratton

Make	Briggs & Stratton
Model	Intek
Horsepower	18.5 @ 3600 rpm
Displacement	30.59 Cu. in (501 cc)
Electrical System	12 Volt, 16 amp. Alternator, Battery: 230 CCA
Oil Capacity	48 Oz. (1.4 L)

CHASSIS:

Fuel Tank Cap.	Capacity: 1.65 Gallons (6,25 L)
Rear Wheels	Tire Size: 18 x 8.50-8
	Inflation Pressure: 615 psi (1,03 bar)
Front Wheels	Tire Size: 11 x 4.00-5
	Inflation Press.: 40 psi (2,76 bar)

TRANSMISSION:

HydroGear

ZA-DHBB-2A7B-1DGX (LH)

ZA-DHBB-2A7C-1DFX (RH)

Type	EZT
Hydraulic Fluid	Sealed Unit
Capacity	2.6 qt (2,5 L)
Speeds	Forward: 0-5.5 MPH (0-8,8 km/h)
@ Specified rpm	Reverse: 0-3.5 MPH (0-5,6 km/h)
Continuous Torque	115 ft. lbs. (155 N.m.)
Output
Maximum Weight	340 lbs. (154 Kg)
on Axle

DIMENSIONS

Overall Length	66”	(167,64 cm)
Overall Width	52”	(132,1 cm)
Height	At Top of Seat: 45” (114,3 cm)
Weight (approx.)	550 lbs. (249 kg)