Manuals
/
Brands
/
Marine Equipment
/
Marine Battery
/
AEG
/
Marine Equipment
/
Marine Battery
AEG
8000012364 BAL
- page 40
1
40
42
42
Download
42 pages, 190.43 Kb
"UniVert 2" inverter
Page 40 of 42
8000012364 BAL, en
9 Dimensional
Drawing
Figure 6 Inverter dimensions (type 1.5 and 3.3 kVA)
Contents
Main
Operating Instructions 8000012364 BAL, en
Operating Instructions "UniVert 2" inverter and SBS option
Notes on these Operating Instructions
Page
Table of Contents
Page
1 Safety Instructions!
1.1 Important Instructions and Explanations
1.2 Accident Prevention Regulations
1.3 Danger during Maintenance and Repair Work
1.4 Qualified Personnel
1.5 Safety Awareness
1.6 Application
1.7 Liability
1.8 Directives
2 General Information
2.1 System Description
INV
SBS
INV
2.2 Function of the System
Page
2.3 Description of the INV
2.4 Principle of Operation of the INV, Electrical
2.5 Description of the SBS
SBS
2.6 Principle of Operation of the SBS, Electrical
3 Function of the Inverter
3.1 DC Input
3.2 AC Output
3.3 DC Input Monitoring System
3.4 Temperature Monitoring System
3.7 ON/OFF Switch
3.8 CAN Bus Interfaces X6 / X7
3.9 DIL Switch
Page
3.10 Signalling, Displays and Remote Signals
Display Colour Operating status
4 Function of the SBS (optional)
4.1 Operating Statuses
ATTENTION:
4.2 Switchback Attempts
4.3 AC Mains Input (X1)
4.4 AC Busbar (X2)
4.5 AC Mains Monitoring System
4.6 AC Busbar Monitoring System
4.7 Temperature Monitoring System
4.10 CAN Bus Interfaces (X6, X7)
4.11 DIL Switch
0 INVs 1 INV 2 INVs 3 INVs
The settings must be the same on all INVs and the SBS!
Switches S3.4 and S3.5: not used
4.12 Signalling, Displays and Remote Signals (X4)
Display Colour Operating status
Assignment of the signal terminals:
4.13 Operating modes
Switchover without gap:
NOTE:
Switchover with gap:
NOTE:
5 Start-Up
5.1 Installation
5.2 Connection
5.3 Connecting the Loads / DC / Mains
Individual INV operation:
5.4 Disconnection
NOTE:
6 Maintenance
7 Troubleshooting
7.1 No Output Voltage or Output Current Present (with connected load)
Individual INV operation:
(Switch the INV OFF and back ON) With INVs in parallel operation: (additionally)
For systems with SBS: (additionally)
8 Technical Data
8.1 General Data INV
- Output voltage ok
- Input undervoltage U
- Input overvoltage UE>
- Fault - Overtemperature >
- Collective fault
8.2 General Data SBS
Page
Page
8.3 Electrical Data