AEG 8000012364 BAL operating instructions

Operating Instructions

8000012364 BAL, en

Operating Instructions "UniVert 2" inverter and SBS option

AEG Power Supply Systems GmbH

Department: PPSD TED

Name: Gleitsmann/Schenuit

Revision: 01

Date: 06.08.2008

Contents

Main Operating Instructions 8000012364 BAL, en Operating Instructions "UniVert 2" inverter and SBS option Notes on these Operating Instructions Page Table of Contents Page 1 Safety Instructions! 1.1 Important Instructions and Explanations 1.2 Accident Prevention Regulations 1.3 Danger during Maintenance and Repair Work 1.4 Qualified Personnel 1.5 Safety Awareness 1.6 Application 1.7 Liability 1.8 Directives 2 General Information 2.1 System Description INV SBS INV 2.2 Function of the System Page 2.3 Description of the INV 2.4 Principle of Operation of the INV, Electrical 2.5 Description of the SBS SBS 2.6 Principle of Operation of the SBS, Electrical 3 Function of the Inverter 3.1 DC Input 3.2 AC Output 3.3 DC Input Monitoring System 3.4 Temperature Monitoring System 3.7 ON/OFF Switch 3.8 CAN Bus Interfaces X6 / X7 3.9 DIL Switch Page 3.10 Signalling, Displays and Remote Signals Display Colour Operating status 4 Function of the SBS (optional) 4.1 Operating Statuses ATTENTION: 4.2 Switchback Attempts 4.3 AC Mains Input (X1) 4.4 AC Busbar (X2) 4.5 AC Mains Monitoring System 4.6 AC Busbar Monitoring System 4.7 Temperature Monitoring System 4.10 CAN Bus Interfaces (X6, X7) 4.11 DIL Switch 0 INVs 1 INV 2 INVs 3 INVs The settings must be the same on all INVs and the SBS! Switches S3.4 and S3.5: not used 4.12 Signalling, Displays and Remote Signals (X4) Display Colour Operating status Assignment of the signal terminals: 4.13 Operating modes Switchover without gap: NOTE: Switchover with gap: NOTE: 5 Start-Up 5.1 Installation 5.2 Connection 5.3 Connecting the Loads / DC / Mains Individual INV operation: 5.4 Disconnection NOTE: 6 Maintenance 7 Troubleshooting 7.1 No Output Voltage or Output Current Present (with connected load) Individual INV operation: (Switch the INV OFF and back ON) With INVs in parallel operation: (additionally) For systems with SBS: (additionally) 8 Technical Data 8.1 General Data INV - Output voltage ok - Input undervoltage U - Input overvoltage UE> - Fault - Overtemperature > - Collective fault 8.2 General Data SBS Page Page 8.3 Electrical Data