AEG 8000012364 BAL operating instructions Table of Contents

"UniVert 2" inverter

Table of Contents

Notes on these Operating Instructions		2
1	Safety Instructions!	6
1.1	Important Instructions and Explanations	6
1.2	Accident Prevention Regulations	6
1.3	Danger during Maintenance and Repair Work	7
1.4	Qualified Personnel	7
1.5	Safety Awareness	8
1.6	Application	8
1.7	Liability	9
1.8	Directives	9
2	General Information	10
2.1	System Description	10
2.2	Function of the System	11
2.3	Description of the INV	13
2.4	Principle of Operation of the INV, Electrical	14
2.5	Description of the SBS	15
2.6	Principle of Operation of the SBS, Electrical	16
3	Function of the Inverter	17
3.1	DC Input	17
3.2	AC Output	17
3.3	DC Input Monitoring System	17
3.4	Temperature Monitoring System	17
3.5	Output Voltage Monitoring System	17
3.6	Monitoring of Functions	17
3.7	ON/OFF Switch	18
3.8	CAN Bus Interfaces X6 / X7	18
3.9	DIL Switch	18
3.10	Signalling, Displays and Remote Signals	20
4	Function of the SBS (optional)	21
4.1	Operating Statuses	21
4.2	Switchback Attempts	21
4.3	AC Mains Input (X1)	22
4.4	AC Busbar (X2)	22
4.5	AC Mains Monitoring System	22
4.6	AC Busbar Monitoring System	22
4.7	Temperature Monitoring System	22
4.8	Monitoring of Functions	22
4.9	Reset Button	22
4.10	CAN Bus Interfaces (X6, X7)	23
4.11	DIL Switch	23
4.12	Signalling, Displays and Remote Signals (X4)	24
4.13	Operating modes	25
5	Start-Up	27
5.1	Installation	27
5.2	Connection	27
5.3	Connecting the Loads / DC / Mains	27
5.4	Disconnection	28

Page 4 of 42 8000012364 BAL, en