"UniVert 2" inverter
1.5Safety Awareness
The qualified personnel defined in chapter 1.4 are responsible for safety. They are also responsible for ensuring that only suitably qualified persons are permitted access to the INV system or the safety area.
The following points must be observed:
All working procedures are prohibited which are detrimental to the safety of persons and the function of the INV system in any way.
The INV system may only be operated in perfect working condition. Never remove or render inoperable any safety devices.
All necessary operational measures must be initiated prior to deactivating any safety device for performing maintenance, repair or any other work on the unit.
Safety awareness also entails informing colleagues of any unsuitable behaviour and reporting any faults detected to the respective authority or person.
1.6Application
The INV system has been designed for installation in a power supply cabinet and may only be used for uninterrupted power supply in the described installation position and operating mode while observing the maximum permissible connection values as given in these operating instructions. The unit may only be used for this intended purpose. It is not permitted to make any unauthorised modifications to the INV or to use any spare parts and replacement parts not approved by AEG SVS or to use the INV system for any other purpose.
The person responsible for the installation must ensure that:
•the safety regulations and operating instructions are readily available and are complied with,
•the operating conditions and technical data are observed,
•safety devices are used,
•the prescribed maintenance work is performed,
•the maintenance personnel is informed without delay or that the INV system is shut down immediately in the event of abnormal voltages or noise, high temperatures, vibrations or any similar effects, in order to detect the cause.
These operating instructions contain all information required by qualified personnel for operation of the INV system. Additional information and explanations for unqualified persons and for the use of the INV system in
The warranty obligations of the manufacturer are only applicable if these operating instructions are observed and complied with.
Page 8 of 42 | 8000012364 BAL, en |
