"UniVert 2" inverter
Switches S2.4, S2.5 and S2.6: Own Address (INV)
The settings must be different on all INVs!
Standard setting:
Address 1: S2.4, S2.5 and S2.6 open
| S2.4 | S2.5 | S2.6 |
|
|
|
|
Address 1 | 0 | 0 | 0 |
Address 2 | 0 | 0 | 1 |
|
|
|
|
Address 3 | 0 | 1 | 0 |
Address 4 | 0 | 1 | 1 |
|
|
|
|
Address 5 | 1 | 0 | 0 |
|
|
|
|
Address 6 | 1 | 0 | 1 |
|
|
|
|
Address 7 | 1 | 1 | 0 |
|
|
|
|
Address 8 | 1 | 1 | 1 |
|
|
|
|
ATTENTION:
With parallel operation systems, the addresses set must not exceed the number of parallel INVs in the system; for example, in a system with
2 parallel inverters only address 1 or 2 may be set. Addresses 3 or 4 are then only permissible for individually operated INVs!
Switches S2.7 and S2.8: Number of redundant INVs
| S2.7 | S2.8 |
|
|
|
0 INVs | 0 | 0 |
|
|
|
1 INV | 0 | 1 |
|
|
|
2 INVs | 1 | 0 |
|
|
|
3 INVs | 1 | 1 |
|
|
|
The settings must be the same on all INVs and the SBS!
Standard setting: S2.7 and S2.8 open
Example: 4 INVs are in the system, at least 3 INVs should run,
i.e. 1 INV is redundant: S2.1=0; S2.2=1; S2.3=1; S2.7=0; S2.8=1
Page 19 of 42 | 8000012364 BAL, en |
