Snapper Z-Mow / 150Z manual Lubrication, Grease, Oil

Page 19

LUBRICATION

Service Interval: 25 hours.

Lubricate the unit at the locations shown in Figures 15 through 17 as well as the following lubrication points.

Grease:

•front wheel grease fittings

•front wheel bushings

•mower pivots

•mower arbors

Use grease fittings when present.

Not all greases are compatible. Use automotive-type lithi- um grease.

Oil:

•rear frame assembly pivot

•hydro linkage

•brake linkage

•frame pivot points

•mower deck height adjustment linkage

•brake linkage

Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Remember to wipe fittings and sur- faces clean both before and after lubrication.

Figure 16. Lubricating Rider

Figure 15a. Mower Lubrication

Figure 17. Lubricating Rider

Figure 15b. Arbor Lubrication (3-Blade Model Shown)

17

Image 19

Contents Mfg. No Description OPERATOR’S ManualPage Table of Contents General Operation Safety RulesIgnition System Safe Handling of Gasoline Service & MaintenanceSafety & Operation Decals Only Identification NumbersNorth American CE ModelsRead The Operator’s Manual PRE-OPERATIONThrottle Control OperationControl Functions Ground Speed Levers Parking BrakeGeneral Operating Safety Fuel Recommendations Checks Before StartingMowing Emergency StoppingStopping the Rider & Engine Starting the EngineReverse Travel Practice Driving PracticeSmooth Travel Forward Travel PracticeExecuting an End-Of-Row Zero Turn Practice Turning Around a CornerPractice Turning In Place Executing TurnsInstalling the Mower Deck Mower Deck Removal InstallationRemoving the Mower Deck 18.5HP Briggs & Stratton MaintenanceMaintenance Schedule Rider MAINTENANCE, All ModelsClean Debris from Engine Cooling Areas and AIR Filter Clean Debris from Rider and Engine CompartmentCheck Tire Pressure Grease LubricationOil Blade Removal Clean Deck Check / Replace Mower BladesCheck Rider Safety System Cleaning the Battery and CablesOperational Safety Checks Adjust PTO Clutch Window Adjustment Nut Feeler Gauge Check / Adjust PTO ClutchChange Engine OIL Check Engine OIL LevelChange Engine OIL & Filter Air Filter Removal & Installation AIR Filter & PRE-CLEANERAir Filter Service Pre-Cleaner Pre-Cleaner ServiceReplace Spark Plug Ground Speed Control Lever Adjustment Service & AdjustmentsSpeed Balancing Adjustment Battery Charging Cutting Height AdjustmentPTO Clutch Adjustment Brake AdjustmentSide to Side Leveling Mower Deck Leveling AdjustmentsMower Drive Belt Replacement Mower Belt ReplacementFront To Back Leveling Storage StorageTroubleshooting the Rider TroubleshootingTroubleshooting the Mower Transmission DimensionsEngine ChassisPage Page RO D U C T S