Section 2 - OPERATING INSTRUCTIONS
2.3.5. CUTTING HEIGHT ADJUSTMENT
This machine has seven different cutting height positions. IMPORTANT: When positioning the cutting deck into a higher cutting position, pull up on the deck lift handle only, it is not necessary to pull up on the release lever at the same time. Use the release lever when moving deck cutting height to a lower cutting position.
1.Grasp both handles together to disengage latch.
2.Raise or lower handles to desired height.
3.Release lower handle to engage latch. See Figure 2.9.
WARNING
Never park the YARD CRUISER on an incline or embankment.
DECK LIFT
HANDLE
HIGHEST
NOTCH
RELEASE
LEVER
CONNECTING BAR OMITTED
IN THIS VIEW FOR CLARITYDETENT PLATE
FIGURE 2.9
9