Snapper 1807-1 Check In-Line Filter, Cleaning Detergent Siphoning Tube, Nozzle Maintenance

Page 12

Snapper 2300 PSI Pressure Washer

2.Pull trigger on spray gun and hold.

3.When water supply is steady and constant, engage safety latch.

To remove contaminants from the pump, follow these steps:

1.Set up pressure washer as described in “Preparing Pressure Washer For Use”. Connect water supply and turn water on.

2.Remove nozzle extension from spray gun.

3.Start engine according to instructions in “How To Use Pressure Washer”.

4.Squeeze trigger on spray gun and hold.

5.When water supply is steady and constant, engage safety latch and refasten nozzle extension.

Check In-Line Filter

Refer to Figure 12 and service the in-line filter if it becomes clogged, as follows:

Figure 12 — Clean In-Line Filter

Filter Screen

Nozzle

Extension

O-ring

Cleaning Detergent Siphoning Tube

If you used the chemical injection hose, you must flush it with clean water before stopping the engine.

1.Place chemical injection hose in a bucket full of clean water.

2.Slide adjustable nozzle forward to low pressure position. Flush for 1-2 minutes.

3.Shut off engine.

IMPORTANT: Simply shutting OFF engine will not release pressure in the system. When the engine has

shut down, squeeze the trigger on the spray gun to relieve the pressure in the hose.

Nozzle Maintenance

A pulsing sensation felt while squeezing the spray gun trigger may be caused by excessive pump pressure.The principal cause of excessive pump pressure is a orifice clogged or restricted with foreign materials, such as dirt, etc.To correct the problem, immediately clean the orifice using the tools included with your pressure washer and follow these instructions:

1.Shut off engine and turn off water supply.

2.Detach nozzle extension from spray gun.Twist nozzle clockwise to stream position. Using supplied 2mm (5/64) allen wrench, remove orifice from end of nozzle extension (Figure 13).

1.Detach spray gun and nozzle extension from high pressure hose. Detach nozzle extension from spray gun and remove o-ring and screen from nozzle extension. Flush the screen, spray gun, and adjustable nozzle extension with clean water to clear debris.

2.If screen is damaged, the o-ring kit contains a replacement in-line filter screen and o-ring. If undamaged, reuse screen.

3.Place in-line filter screen into threaded end of nozzle extension. Direction does not matter. Push screen in with eraser end of pencil until it rests flat at bottom of opening.Take care to not bend screen.

4.Place o-ring into recess. Push o-ring snugly against in-line filter screen.

5.Assemble nozzle extension to spray gun.

Figure 13 — Removing and Cleaning Nozzle

Orifice

3.Remove in-line filter from other end of nozzle extension.

4.Use wire included in kit (or a small paper clip) to free any foreign material clogging or restricting orifice (Figure 13).

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 2300PSI Table of Contents Safety RulesEquipment Description When Transporting or Repairing Equipment Fire or severe burns can occur Unintentional sparking can result in fire or electric shockKnow Your Pressure Washer Assembly Carton ContentsPreparing Pressure Washer for USE Remove Pressure Washer from CartonAdd Engine Oil and Fuel Connect Hose and Water Supply to PumpHOW to USE Your Pressure Washer Checklist Before Starting EngineHow to Start Your Pressure Washer How to Stop Your Pressure WasherHow to Use Adjustable Nozzle Applying Detergent with the Adjustable NozzleYou must attach all hoses before you start the engine To apply detergent, follow these stepsPressure Washer Rinsing Automatic Cool Down SystemFor Rinsing Discharging the warm water onto the groundSpecifications General Maintenance RecommendationsPressure Washer Maintenance Cleaning Detergent Siphoning Tube Nozzle MaintenanceCheck In-Line Filter To remove contaminants from the pump, follow these stepsEngine Maintenance Ring MaintenancePump Maintenance Changing Pump OilYou must protect your unit from freezing temperatures Preparing the Unit for StorageStoring the Engine Protecting the PumpSnapper 2300 PSI Pressure Washer Snapper 2300 PSI Pressure Washer Troubleshooting Exploded View and Parts List Main Unit DescriptionItems Not Illustrated Description Exploded View and Parts List Pump Include all parts shown within the boxSnapper Owner Warranty Policy Effective January 1 About your equipment warrantyEquipment Consumer Use Commercial Use

1807-1 specifications

The Snapper 1807-1 is a sophisticated piece of equipment that caters primarily to landscaping and lawn care enthusiasts and professionals. This versatile machine combines power and efficiency, making it an essential tool for maintaining large areas of turf. Its design and functionality offer robust features that stand out in the current market.

One of the key features of the Snapper 1807-1 is its reliable engine. Powered by a 180 cc OHV engine, this mower is designed for optimal performance, ensuring durability and long-lasting use. The engine not only provides ample power but also enhances fuel efficiency, allowing users to cover larger areas without the need for frequent refueling. The self-propelling mechanism further complements this power by reducing the physical strain on the operator, making it easier to navigate various terrains.

The cutting deck of the Snapper 1807-1 is another highlight. With a 21-inch width, it is perfect for maneuvering through tight spaces while still delivering a professional finish. The deck is designed for superior grass clipping collection, helping maintain a neat and tidy lawn. Additionally, the adjustable height settings allow users to customize the cutting height based on their specific lawn care needs, making it suitable for different grass types and preferences.

The Snapper 1807-1 also incorporates advanced technologies that enhance its usability. The lawn mower features a robust gear drive system, which offers smoother operation and increased control over speed settings. This means that whether you are tackling tall grass or mowing a manicured lawn, you can adjust the speed to your liking, ensuring a seamless mowing experience.

Moreover, the ergonomic design of the controls provides ease of use, allowing operators to engage and adjust functions intuitively even while on the move. The foldable handle enhances storage capabilities, making it space-saving for users with limited storage options.

Finally, maintenance is simplified in the Snapper 1807-1. The machine comes equipped with easily accessible components, allowing for quick checks and servicing. This attention to maintenance needs ensures that the mower remains in top condition, extending its lifespan and reliability. Overall, the Snapper 1807-1 is a powerful, user-friendly machine that meets the demands of both amateur and professional landscapers alike. Its thoughtful design and innovative features make it a standout choice in the lawn care equipment market.
Top Page Image Contents