Snapper 1807-1 Preparing the Unit for Storage, Storing the Engine, Protecting the Pump

Page 14

Snapper 2300 PSI Pressure Washer

PREPARING THE UNIT FOR STORAGE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and “freeze” pump action. If you do not plan to use the pressure washer for more than 30 days, follow this procedure:

1.Flush detergent siphoning tube by placing the filter into a pail of clean water while running pressure washer in low pressure mode (adjustable nozzle in the forward position). Flush for one to two minutes.

2.Shut off the engine and let it cool, then remove high pressure and garden hoses. Disconnect spark plug wire from spark plug.

3.Empty the pump of all pumped liquids by pulling the recoil handle about 6 times.This should remove most of the liquid in the pump.

4.Use PumpSaver to prevent corrosion build up and freezing of pump.

5.Store unit in a clean, dry area.

Protecting the Pump

To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver to treat pump.This prevents freeze damage and lubricates pistons and seals.

NOTE: PumpSaver is available as an optional accessory. It is not included with the pressure washer. Contact the nearest authorized service center to purchase PumpSaver.

CAUTION

You must protect your unit from freezing temperatures.

•Failure to do so will permanently damage your pump and render your unit inoperable.

•Freeze damage is not covered under warranty.

CAUTION

Read and follow all cautions and warnings on the PumpSaver can label.

• Always wear eye protection when using PumpSaver.

To use PumpSaver, make sure the pressure washer is turned off and disconnected from supply water. Read and follow all instructions and warnings given on the PumpSaver container.

NOTE: PumpSaver will drip from pump after treatment and will stain wood and concrete.

NOTE: If PumpSaver is not available, draw RV antifreeze (non-alcohol) into the pump by pouring the solution into a 3-foot section of garden hose connected to inlet adapter and pulling recoil handle twice.

STORING THE ENGINE

See the engine owner’s manual for instructions on how to properly prepare the engine for storage.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 2300PSI Equipment Description Table of ContentsSafety Rules When Transporting or Repairing Equipment Fire or severe burns can occur Unintentional sparking can result in fire or electric shockKnow Your Pressure Washer Preparing Pressure Washer for USE AssemblyCarton Contents Remove Pressure Washer from CartonAdd Engine Oil and Fuel Connect Hose and Water Supply to PumpHow to Start Your Pressure Washer HOW to USE Your Pressure WasherChecklist Before Starting Engine How to Stop Your Pressure WasherYou must attach all hoses before you start the engine How to Use Adjustable NozzleApplying Detergent with the Adjustable Nozzle To apply detergent, follow these stepsFor Rinsing Pressure Washer RinsingAutomatic Cool Down System Discharging the warm water onto the groundPressure Washer Maintenance SpecificationsGeneral Maintenance Recommendations Check In-Line Filter Cleaning Detergent Siphoning TubeNozzle Maintenance To remove contaminants from the pump, follow these stepsPump Maintenance Engine MaintenanceRing Maintenance Changing Pump OilStoring the Engine You must protect your unit from freezing temperaturesPreparing the Unit for Storage Protecting the PumpSnapper 2300 PSI Pressure Washer Snapper 2300 PSI Pressure Washer Troubleshooting Items Not Illustrated Description Exploded View and Parts List Main UnitDescription Exploded View and Parts List Pump Include all parts shown within the boxEquipment Consumer Use Commercial Use Snapper Owner Warranty Policy Effective January 1About your equipment warranty

1807-1 specifications

The Snapper 1807-1 is a sophisticated piece of equipment that caters primarily to landscaping and lawn care enthusiasts and professionals. This versatile machine combines power and efficiency, making it an essential tool for maintaining large areas of turf. Its design and functionality offer robust features that stand out in the current market.

One of the key features of the Snapper 1807-1 is its reliable engine. Powered by a 180 cc OHV engine, this mower is designed for optimal performance, ensuring durability and long-lasting use. The engine not only provides ample power but also enhances fuel efficiency, allowing users to cover larger areas without the need for frequent refueling. The self-propelling mechanism further complements this power by reducing the physical strain on the operator, making it easier to navigate various terrains.

The cutting deck of the Snapper 1807-1 is another highlight. With a 21-inch width, it is perfect for maneuvering through tight spaces while still delivering a professional finish. The deck is designed for superior grass clipping collection, helping maintain a neat and tidy lawn. Additionally, the adjustable height settings allow users to customize the cutting height based on their specific lawn care needs, making it suitable for different grass types and preferences.

The Snapper 1807-1 also incorporates advanced technologies that enhance its usability. The lawn mower features a robust gear drive system, which offers smoother operation and increased control over speed settings. This means that whether you are tackling tall grass or mowing a manicured lawn, you can adjust the speed to your liking, ensuring a seamless mowing experience.

Moreover, the ergonomic design of the controls provides ease of use, allowing operators to engage and adjust functions intuitively even while on the move. The foldable handle enhances storage capabilities, making it space-saving for users with limited storage options.

Finally, maintenance is simplified in the Snapper 1807-1. The machine comes equipped with easily accessible components, allowing for quick checks and servicing. This attention to maintenance needs ensures that the mower remains in top condition, extending its lifespan and reliability. Overall, the Snapper 1807-1 is a powerful, user-friendly machine that meets the demands of both amateur and professional landscapers alike. Its thoughtful design and innovative features make it a standout choice in the lawn care equipment market.
Top Page Image Contents