Snapper 1807-1 Engine Maintenance, Ring Maintenance, Pump Maintenance, Changing Pump Oil

Page 13

Snapper 2300 PSI Pressure Washer

5.Using a garden hose, remove additional debris by back flushing water through nozzle extension (Figure 14). Back flush between 30 to 60 seconds.Turn adjustable nozzle extension to stream spray and move nozzle from low to high while flushing.

Figure 14 — Backflushing the Nozzle

6.Reinstall orifice and in-line filter into nozzle extension. DO NOT overtighten orifice with allen wrench.

7.Reconnect nozzle extension to spray gun.

8.Reconnect water supply, turn on water, and start engine.

9.Test pressure washer by operating with nozzle in high and low positions.

O–Ring Maintenance

Through the normal operation of your pressure washer, o–rings are used to keep the connections of the hoses and spray gun tight and leak–free.These o-rings may become worn or damaged.

An O–Ring Maintenance Kit is provided with your pressure washer. It includes replacement o-rings, rubber washer and water inlet filter. Refer to the instruction sheet provided in the kit to service your unit’s o-rings. Note that you will not use all of the parts in the kit.

2.Use a 8mm allen wrench to remove black pump oil cap between high pressure outlet and garden hose inlet (Figure 15).

Figure 15 - Changing Pump Oil

Oil Cap

3.Tilt pressure washer to drain oil into an approved container until it drips slowly from pump.

4.Tilt pressure washer in opposite direction and empty premeasured pump oil bottle into same opening (a small funnel may be helpful).

5.Install black pump oil cap and tighten firmly.

6.Set pressure washer in upright position. Add fuel and engine oil.

ENGINE MAINTENANCE

See the engine owner’s manual for instructions on how to properly maintain the engine.

To remove a worn or damaged o–ring, use a small flathead screwdriver to get underneath the o-ring and pry it off.

Pump Maintenance

Changing Pump Oil

Change oil every 50 hours or once yearly, whichever occurs first.

NOTE: Purchase a premeasured bottle of pump oil, item number 190586GS, by contacting the nearest authorized service center.

Change pump oil as follows:

1.Drain engine oil and fuel from pressure washer.

CAUTION

Avoid prolonged or repeated skin contact with used motor oil.

•Used motor oil has been shown to cause skin cancer in certain laboratory animals.

•Thoroughly wash exposed areas with soap and water.

KEEP OUT OF REACH OF CHILDREN. DON'T POLLUTE. CONSERVE RESOURCES. RETURN USED OIL TO COLLECTION CENTERS.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 2300PSI Safety Rules Table of ContentsEquipment Description When Transporting or Repairing Equipment Unintentional sparking can result in fire or electric shock Fire or severe burns can occurKnow Your Pressure Washer Carton Contents AssemblyPreparing Pressure Washer for USE Remove Pressure Washer from CartonConnect Hose and Water Supply to Pump Add Engine Oil and FuelChecklist Before Starting Engine HOW to USE Your Pressure WasherHow to Start Your Pressure Washer How to Stop Your Pressure WasherApplying Detergent with the Adjustable Nozzle How to Use Adjustable NozzleYou must attach all hoses before you start the engine To apply detergent, follow these stepsAutomatic Cool Down System Pressure Washer RinsingFor Rinsing Discharging the warm water onto the groundGeneral Maintenance Recommendations SpecificationsPressure Washer Maintenance Nozzle Maintenance Cleaning Detergent Siphoning TubeCheck In-Line Filter To remove contaminants from the pump, follow these stepsRing Maintenance Engine MaintenancePump Maintenance Changing Pump OilPreparing the Unit for Storage You must protect your unit from freezing temperaturesStoring the Engine Protecting the PumpSnapper 2300 PSI Pressure Washer Snapper 2300 PSI Pressure Washer Troubleshooting Description Exploded View and Parts List Main UnitItems Not Illustrated Description Include all parts shown within the box Exploded View and Parts List PumpAbout your equipment warranty Snapper Owner Warranty Policy Effective January 1Equipment Consumer Use Commercial Use

1807-1 specifications

The Snapper 1807-1 is a sophisticated piece of equipment that caters primarily to landscaping and lawn care enthusiasts and professionals. This versatile machine combines power and efficiency, making it an essential tool for maintaining large areas of turf. Its design and functionality offer robust features that stand out in the current market.

One of the key features of the Snapper 1807-1 is its reliable engine. Powered by a 180 cc OHV engine, this mower is designed for optimal performance, ensuring durability and long-lasting use. The engine not only provides ample power but also enhances fuel efficiency, allowing users to cover larger areas without the need for frequent refueling. The self-propelling mechanism further complements this power by reducing the physical strain on the operator, making it easier to navigate various terrains.

The cutting deck of the Snapper 1807-1 is another highlight. With a 21-inch width, it is perfect for maneuvering through tight spaces while still delivering a professional finish. The deck is designed for superior grass clipping collection, helping maintain a neat and tidy lawn. Additionally, the adjustable height settings allow users to customize the cutting height based on their specific lawn care needs, making it suitable for different grass types and preferences.

The Snapper 1807-1 also incorporates advanced technologies that enhance its usability. The lawn mower features a robust gear drive system, which offers smoother operation and increased control over speed settings. This means that whether you are tackling tall grass or mowing a manicured lawn, you can adjust the speed to your liking, ensuring a seamless mowing experience.

Moreover, the ergonomic design of the controls provides ease of use, allowing operators to engage and adjust functions intuitively even while on the move. The foldable handle enhances storage capabilities, making it space-saving for users with limited storage options.

Finally, maintenance is simplified in the Snapper 1807-1. The machine comes equipped with easily accessible components, allowing for quick checks and servicing. This attention to maintenance needs ensures that the mower remains in top condition, extending its lifespan and reliability. Overall, the Snapper 1807-1 is a powerful, user-friendly machine that meets the demands of both amateur and professional landscapers alike. Its thoughtful design and innovative features make it a standout choice in the lawn care equipment market.
Top Page Image Contents