Eltax A-6.2 instruction manual Troubleshooting

Page 11

Troubleshooting

Symptom

Check

No sound

Subwoofer connected to the mains lead.

 

Power is ON.

 

Your unit is connected to the LINE IN (1) of

 

the sub-woofer.

 

Volume control (4).

 

Crossover (5).

11

Red LED not ON

Power switch is in ON position.

 

Subwoofer fuse.

 

Mains plug fuse.

Please note you may hear a tone from the subwoofer when the power are being switched OFF, this is normal and not a fault.

For your guidance.

Service

Before requesting service, please refer to the trouble-shooting guide above. To obtain service please contact your local dealer.

Image 11
Contents Active Subwoofer Dolby Digital Dolby Pro LogicDolby Pro Logic From amplifier with pre out to subwoofer VolumePhase PlacementPlacering InstallationVolume Control Achtung Page Page Page $ 5 $ $ Troubleshooting Active A-6.2Subwoofer

A-6.2 specifications

The Eltax A-6.2 is an impressive passive loudspeaker designed to deliver a remarkable audio experience in both home theater and music listening environments. Known for its stylish design and robust performance capabilities, this speaker is an ideal choice for audiophiles and casual listeners alike.

One of the main features of the Eltax A-6.2 is its dual 6.5-inch bass drivers. These drivers are engineered to produce deep, rich bass tones, making it perfect for genres that benefit from solid low-end response, such as electronic music and action-packed movie soundtracks. The enhanced bass is complemented by a 1-inch silk dome tweeter that ensures clear and crisp highs, presenting a well-rounded audio profile that allows for an engaging listening experience.

The A-6.2 also boasts a frequency response range of 38 Hz to 20 kHz. This extensive range allows listeners to experience a broad array of sound frequencies, ensuring that both the deep rumble of bass and the delicate nuances of higher frequencies are accurately reproduced. The design also includes a crossover frequency of 2 kHz, which balances the output between the woofer and the tweeter, allowing for seamless sound transitions and reducing distortion.

In terms of build quality, the Eltax A-6.2 features a sturdy cabinet that minimizes vibrations, thus enhancing performance. The speaker is available in several finishes, allowing it to blend seamlessly into various interior designs. Its front-firing bass port adds flexibility in placement options, enabling it to be positioned close to walls without compromising sound quality.

The Eltax A-6.2 is also user-friendly, with a rated power handling capacity of 100 watts, making it compatible with a wide range of amplifiers and receivers. Its nominal impedance of 8 ohms makes it easy to integrate into most home audio systems without compatibility concerns.

Overall, the Eltax A-6.2 is a well-designed loudspeaker that offers impressive performance characteristics, solid build quality, and attractive aesthetics, making it an excellent addition to any audio setup. Whether for home cinema use or enjoying music, the A-6.2 ensures an immersive listening experience that meets the expectations of discerning audio enthusiasts.