La Crosse Technology WS-9075U Quick SET-UP Guide, Do not Press ANY Buttons for 15 Minutes

Page 4

QUICK SET-UP GUIDE

Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries.

1.Have the indoor weather station and remote temperature sensor 3 to 5 feet apart.

2.Batteries should be out of both the indoor weather station and remote temperature sensor units for 10 minutes.

3.Place the batteries into the remote temperature sensor first then into the indoor weather station.

4.DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.

In this time the indoor weather station and remote temperature sensor will start to talk to each other and the display will show the indoor temperature/humidity, and outdoor temperature. If the indoor weather station does not display all information after the 15 minutes please retry the set up as stated above. After all information has been displayed for 15 minutes you can place your sensors outdoors and set your time.

Important Notes on Set-up and Operation

•The remote temperature sensor should be placed in a dry, shaded area.

•Fog and mist will not harm your remote temperature sensor but direct rain must be avoided.

•The remote temperature sensor has a range of 330 feet. Any walls that the signal will have to pass through will reduce distance. An outdoor wall or window can have up to 30 feet of resistance and an interior wall can have up to 20 feet of resistance. Your distance plus resistance should not exceed 330 ft. in a straight line.

•The remote temperature sensor transmits a signal every minute. After the batteries have been installed, the indoor weather station will search for the signal for a duration of 4 minutes. If there is no temperature reading in the OUTDOOR LCD after 4 minutes, make sure the units are within range of each other, or repeat the battery installation procedure.

•If a button is pressed before the indoor weather station receives the signal from the remote temperature sensor, you will need to follow the battery installation procedure again.

To complete the set up of your new wireless weather station after the 15 minutes have passed please follow the steps that follow in the Detailed Set-Up Guide.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents WS-9075U Table of Contents Inventory of Contents Do not Press ANY Buttons for 15 Minutes Quick SET-UP GuideImportant Notes on Set-up and Operation Indoor Weather Station Program Mode Programming Sequence and Default SettingsII. Setting the LCD Contrast II. Function KeysIII. Time Zone Setting IV. Daylight Saving Time DST SettingRADIO-CONTROLLED Time ON/OFF Setting VI or 24 Hour Time SettingVII. Time Setting Wwvb Remote Control TimeVIII. Setting the YEAR, DAY and Month Setting the Forecast SensitivityIX. Selecting F or C Time LCDXI. Setting the Animation Forecast Icons and Stars Features of the WS-9075UII. Outdoor Temperature Weather ForecastWeather Icons Weather Tendency ArrowsIV. Minimum and Maximum Temperature and Humidity Records Viewing the Outdoor Temperature RecordsViewing the Indoor Temperature and Humidity Records Resetting the Mimimum and Maximum RecordsMoon Phase Outdoor Channel RE-LEARN ModeTime Alarm SET-UP of Multiple Units VII. Adding Remote Temperature Sensors OptionalOutdoor LCD Mounting with Screws Mounting Remote Temperature SensorMounting with Adhesive Tape Troubleshooting Foldout Table StandMaintenance and Care Instructions SpecificationsFCC Disclaimer
Top Page Image Contents