La Crosse Technology WS-9075U Program Mode, Programming Sequence and Default Settings

PROGRAM MODE

Programming Note: If 15 seconds are allowed to pass, or the CHANNEL button is pressed during the programming mode, the unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If you don’t leave the program mode during the programming of sections IV through XI, you can advance to step 4 of the next program setting. If you do leave the program setting (or want to program a specific setting) follow each instructional step to program that setting.

I.PROGRAMMING SEQUENCE AND DEFAULT SETTINGS

The programming sequence and default (factory) settings are as follows:

LCD Contrast	2
Time Zone	-5 (Eastern)
Daylight Saving Time	ON
Radio-controlled time	ON
reception
12/24-hour time	12
Time – Hour	12
Time – Minute	:00
Year	2003
Month	1
Day	1
Temperature	ºF
Forecast Sensitivity	2
Animation (Weather Icons	ON
and Stars)

II.FUNCTION KEYS

The function keys are operated by pressing the key corresponding to the operation that you want to perform.

II.SETTING THE LCD CONTRAST

1.Press and hold the SET button for 3 seconds.

2.“LCD” will show in the TIME LCD and the number setting will flash.

Note: There are 8 LCD contrast levels to choose from—“Lcd 0” is the lightest, and “Lcd 7” is the darkest.

3.Press and release the MIN/MAX/+ button to select a darker level and the ALARM/- key to select a lighter level.

4.Press and release the SET button to confirm and advance to the Time Zone setting.

6