La Crosse Technology WS-9075U RADIO-CONTROLLED Time ON/OFF Setting, VI or 24 Hour Time Setting

Page 8

V.RADIO-CONTROLLED TIME ON/OFF SETTING

1.“RCC” will appear in the DATE LCD and “ON” or “OFF” will flash in the TIME LCD.

2.Press and release the MIN/MAX/+ or the ALARM/- key to select radio-controlled time on or off.

3.Press and release the SET button to confirm and advance to the 12/24-hour time setting.

VI. 12 OR 24 HOUR TIME SETTING

1.“12h” or “24h” will flash in the TIME LCD.

2.Press and release the MIN/MAX/+ or the ALARM/- button to select 12 or 24-hour time format.

Note: When in the 12-hour format “P.M.” will appear to the left of the hour in the time LCD between the hours of noon and midnight.

3. Press and release the SET button to confirm and advance to the time setting.

VII. TIME SETTING

There are two methods by which the time and date can be set:

A)Automatically via WWVB reception, or

B)Manually.

A. WWVB (Remote Control Time)

This method requires you to do nothing, except wait for the signal to be received, and to select a time zone. Reception usually takes approximately 10 minutes during optimal conditions. The best conditions for reception is at night, between midnight and 6:00 am—when there is less atmospheric interference. To keep your time as accurate as possible, the indoor weather station conducts a WWVB search every night between these hours, and overrides any manually set time. The WWVB tower icon (appearing in the TIME LCD) will flash when a signal-search is in progress and a signal is being received, and will remain steady when the signal has been received. If the WWVB time has not been received after 15 minutes of battery installation, you may manually set the time or leave the time function alone (reception will occur regardless).

B. MANUAL TIME SETTING

Note: When in the 12-hour format “P.M.” will appear to the left of the hour in the time LCD between the hours of noon and midnight.

Note: Reception of the WWVB signal will automatically set the time. The reception of the signal will override any programmed time.

1.The hours digits will flash in the TIME LCD.

2.Press and release the MIN/MAX/+ button to advance or the ALARM/- key to decrease the hours.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents WS-9075U Table of Contents Inventory of Contents Important Notes on Set-up and Operation Quick SET-UP GuideDo not Press ANY Buttons for 15 Minutes Indoor Weather Station Program Mode Programming Sequence and Default SettingsII. Setting the LCD Contrast II. Function KeysIII. Time Zone Setting IV. Daylight Saving Time DST SettingRADIO-CONTROLLED Time ON/OFF Setting VI or 24 Hour Time SettingVII. Time Setting Wwvb Remote Control TimeVIII. Setting the YEAR, DAY and Month Setting the Forecast SensitivityIX. Selecting F or C Time LCDXI. Setting the Animation Forecast Icons and Stars Features of the WS-9075UII. Outdoor Temperature Weather ForecastWeather Icons Weather Tendency ArrowsIV. Minimum and Maximum Temperature and Humidity Records Viewing the Outdoor Temperature RecordsViewing the Indoor Temperature and Humidity Records Resetting the Mimimum and Maximum RecordsTime Alarm Outdoor Channel RE-LEARN ModeMoon Phase Outdoor LCD VII. Adding Remote Temperature Sensors OptionalSET-UP of Multiple Units Mounting with Adhesive Tape Mounting Remote Temperature SensorMounting with Screws Troubleshooting Foldout Table StandMaintenance and Care Instructions SpecificationsFCC Disclaimer
Top Page Image Contents