Cub Cadet 7000 Series Transmission Hi/Lo Range Shift Lever, Cup Holder, Hand Holds, Tail Lights

Page 17

E. Transmission Hi/Lo Range Shift Lever

The Hi/Lo range shift lever is located on the right fender. The lever has two speed range settings and a neutral position. The lever must be shifted into either the high or low range prior to depressing the forward/reverse pedal to drive the tractor.

•Push the lever forward to shift into the high range.

•Push the lever rearward to shift into the low range.

•Move the lever to the center position to shift into the neutral position.

WARNING: Never attempt to shift the range lever when the tractor is in motion.

F.Cup Holder

The cup holder is located on the right fender.

G. Hand Holds

Hand holds are built into both the left and right hand fender covers. The handles can be used to assist in mounting and dismounting the tractor.

H. Amber Hazard Lights

The hazard lights are located on each side of the ROPS bar. The lights illuminate in a flashing mode when the hazard light switch is turned on. Always use the hazard lights when it is necessary to warn others that the tractor is being operated in the area.

J. Tail Lights

The tail lights illuminate when the ignition switch is in the ON position and the headlight switch is turned on.

K. Reverse Lights

The reverse lights illuminate when the tractor is being operated in the reverse direction.

L. Storage Tray

The storage tray is located behind the seat. Use the tray to carry small loose articles while operating the tractor.

M. Foldable ROPS (Rollover Protective Structure)

ROPS is installed to prevent or reduce injuries to the operator should the tractor accidentally over- turn. The foldable feature allows the ROPS to be lowered when operating in areas with low over- head clearance. The protection provided by the ROPS is minimized if the seat belt is not used and eliminated when in the folded position.

N. Seat Belt

The seat belt, properly adjusted and used in conjunction with the Rollover Protective Structure (ROPS), can greatly reduce the risk of serious injury or death to the operator if an accidental tractor overturn occurs.

WARNING: DO NOT use the seat belt if the ROPS is in the folded position, or the structure has been removed from the tractor.

O. Auxiliary Hydraulic Control Handle

The auxiliary hydraulic control handle is located on the front of the right hand fender cover. Use this handle to control the movement of attachments connected to the auxiliary hydraulic system of the tractor.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 184VSHYGXW%OXMIRKIWIPPWGLEJX¤7EEVFVµGOIR¤+IVQER English Français Deutsch To the Owner Table of ContentsCalling Service Information Rops Information Plate Recording Model and Serial Number InformationTractor Model Plate Using the Tractor Correctly General Operation Important Safe Operation PracticesChildren Slope OperationOperating the PTO Do notService Safety Frame RopsSymbols on the appliance Starting AID Located Under Hood Safety LabelsFAN Warning Label Located on Each Side of Radiator Roll Over Warning Label Located on RIGHT/REAR Fender Battery Warning Label Located Under HoodPTO Warning Label Located on Rear PTO Shield Floorboard and Dash Panel Mounted Controls Controls and FeaturesIgnition Switch PTO SwitchSeat Adjustment Lever Steering WheelHeadlight Switch Hazard Light SwitchDifferential Lock Pedal Parking Brake LeverEngine Coolant Temperature Light Battery Indicator LightParking Brake Indicator Light PTO Indicator LightPTO Reverse Override Switch Fender Mounted Conrtols and FeaturesFuel Fill Cap PTO Selection LeverCup Holder Transmission Hi/Lo Range Shift LeverHand Holds Amber Hazard LightsFolding the Rops OperationRollover Protective Structure Rops Fueling the Tractor Safety Interlock SystemNEW Tractor BREAK-IN Procedures Starting the Engine Using Jumper Cables to Start EngineCold Weather Starting Stopping the EngineDriving the Tractor Using the FORWARD/REVERSE PedalDriving on Slopes Stopping the TractorLOW Using the HI/LO Range Shift LeverUsing the Differential Lock Pedal Engaging the PTO Using the Hydraulic Lift LeverUsing the PTO Selection Lever Using the TOP Link Retainer Hook Using the PTO Reverse Override SwitchHazard Lights LightingUsing the Hitch Plate Using the Three Point HitchUsing the Auxiliary Hydraulic Valve Using the Auxiliary Hydraulic Control HandleOn Demand Four Wheel Drive Tractor WeightingAdjusting the Seat AdjustmentsAdjusting the Seat Belt Three Point Hitch AdjustmentsCheck the TOE-IN AS Follows Adjusting Front Wheel TOE-INAdjusting Hydraulic Lift Feedback ROD Adjusting the BrakesGeneral Information MaintenanceLubrication Table Lubrication and Maintenance Chart Illustration Service Intervals Operation to Lubrication and Maintenance ChartGeneral Battery Information Accessing the Engine CompartmentCharging the Battery Battery RemovalBattery Maintenance Battery StorageTail Light Bulb Replacement Head Light Bulb ReplacementHazard Bulb Replacement Servicing Electrical System Accessing the Fuse CenterInstrument Panel Fuses RelaysChecking TRANSMISSION/HYDRAULIC System OIL Level Hazard Light Flasher RelayChanging TRANSMISSION/HYDRAULIC System OIL Initial Break-In Period Filter ChangeCheck Front Axle Oil Regularly Scheduled Oil Filter ChangesChanging Front Axle and Final Reduction Gear Case OIL Check Final Reduction Gear Case OilTire Maintenance Maintenance of the Rollover Protective Structure RopsLubrication of Main Drive Shaft Lubrication of FWD Drive ShaftRemoving the Tractor from Storage Tractor StorageCleaning the Engine Engine MaintenanceCleaning RADIATOR/RADIATOR Screen Checking Engine OIL LevelChanging the Engine OIL and Filter Adding Engine OILChecking Engine Coolant Level Changing the Engine Coolant Changing the AIR CleanerInspection of Cooling System Hoses Changing The Fuel Filter Servicing the Fuel FilterDraining The Fuel Filter Fuel Injector Nozzle Service Engine Breather ServiceSpecifications Optional Equipment and Accessories HOW to Obtain Service 073URGXFWV$NWLHQJHVHOOVFKDIW

7000 Series specifications

The Cub Cadet 7000 Series is a line of premium lawn tractors designed for homeowners who seek both performance and durability in their gardening equipment. With a robust build quality and innovative features, the 7000 Series enhances the mowing experience, making it efficient and enjoyable.

One of the standout features of the 7000 Series is its powerful engine options. Equipped with Kohler and Kawasaki twin-cylinder engines, these tractors offer impressive horsepower that translates into higher mowing speeds and superior cutting performance. The engines are designed to provide reliable starting and increased torque, making them suitable for tackling thick grass and uneven terrain.

The series also highlights a superior cutting system. With a 48 to 54-inch cutting deck, the 7000 Series provides a precise and clean cut, allowing users to achieve a manicured lawn. The cutting decks are constructed with durable materials and feature a reinforced edge, ensuring longevity and resistance to wear over time. The decks come with adjustable cutting heights, giving users the flexibility to choose the perfect height for their lawn conditions.

Incorporating advanced technology, the Cub Cadet 7000 Series features a premium hydrostatic transmission. This system offers smooth and effortless speed control and allows for seamless transitions between forward and reverse. The intuitive controls facilitate maneuverability, making it easy for users to navigate around obstacles in their yard.

Comfort and convenience are paramount in the design of the 7000 Series. The tractors come equipped with fully adjustable, high-back ergonomic seats that provide excellent support during extended mowing sessions. Additionally, the dashboard is designed with maximized visibility, offering users clear insights into the tractor's operations and available features.

To enhance productivity, the 7000 Series is compatible with a range of accessories, including mulch kits, baggers, and snow removal attachments. These attachments increase the versatility of the tractors, allowing users to efficiently manage seasonal tasks beyond mowing.

In conclusion, the Cub Cadet 7000 Series combines power, durability, and convenience, making it a top choice for homeowners seeking a high-performance lawn tractor. With impressive cutting capabilities, advanced technologies, and ergonomic design, this series is well-suited for anyone looking to maintain their lawn with ease and efficiency. Whether for regular mowing or seasonal yard work, the 7000 Series stands out as a reliable and practical choice.
Top Page Image Contents