Cub Cadet LTI050 manual CruiseControl, Brake, PTOBlade Engage, Battery

Page 11

SystemsIndicatorMonitor/ HourMeter ElectricPTO/

BladeEngageKnob

 

j /

jr

To engage the power to the cutting deck or other (separately

BATT.

 

OIL

.J

available) attachments, pull

 

qlL

 

 

 

......J

 

 

 

 

 

outward

on the PTO/Blade

 

 

 

 

 

 

Engage

knob. Push the PTO/

II

11

 

 

42.0

 

Blade Engage knob inward to

 

 

 

 

 

disengage the power to the

 

 

 

 

 

 

 

 

 

 

 

 

cutting deck or other (separately available)

 

///

HOURS

1/10 \\\

 

attachments.

 

 

 

 

 

 

 

 

 

 

 

NOTE: The PTO/Blade Engage knob must be in the

PTO / BLADE

 

PARKING

 

disengaged (OFF) position when starting the engine.

LCD

Located in the center of the tractor's console, the systems indicator monitor records, and displays on its LCD, hours of tractor operation whenever the ignition key is rotated out of the STOP position.

The Indicator Monitor will also remind the operator of maintenance intervals for changing the engine oil. The LCD will alternately flash the recorded hours, "CHG" and "OIL" for five minutes, after every 50 hours of recorded operation elapse. The maintenance interval lasts for two hours (from 50-52, 100-102, 150-152, etc.). The LCD will also flash as described above for five minutes every time the tractor's engine has been started during this maintenance interval. Before the interval expires, change the crankcase oil level as instructed in this Operator's Manual.

Brake

If the Brake light illuminates when attempting to start the tractor's engine, depress the brake pedal.

PTO(Blade Engage)

If the PTO light illuminates when attempting to start the tractor's engine, move PTO lever into the disengaged (OFF) position.

0il

It is normal for the Oil light to illuminate while the engine is cranking during start-up, but if it illuminate's during operation, while the engine is running, stop the tractor immediately and check the engine oil level as instructed in this Owner's Manual.

Battery

It is normal for the Battery light to illuminate while the engine is cranking during start-up, but if it illuminate's during operation, while the engine is running, the battery is in need of a charge or the engine's charging system is not generating sufficient amperage. Charge the battery as instructed on page 26 of this manual or have the charging system checked by your Cub Cadet dealer.

CruiseControl

Lever

The cruise control lever is located on the tractor dash

panel, below the steering wheel. Push the cruise control lever downward while traveling forward at a desired speed. While holding the lever down, release pressure from the drive pedal.

This will engage the cruise control and allow the tractor to remain at that speed without applying pressure to the drive pedal. Press the brake pedal or the drive pedal to deactivate cruise control. Refer to page 14 for detailed instructions regarding the cruise control feature.

NOTE: Cruise control can NOT be engaged at the tractor's fastest ground speed. If the operator should attempt to do so, the tractor will automatically decelerate to the fastest optimal mowing ground speed.

Parking Brake

Lever

To set the parking brake, fully depress the brake pedal and

push the parking brake lever down. Hold the lever down while taking your foot off the brake pedal. Both the parking lever and the brake pedal will then stay depressed. To release the parking brake, depress the brake pedal slightly. The parking brake lever will then return to its original position.

NOTE: The parking brake must be set if the operator leaves the seat with the engine running or the engine will automatically shut off.

IMPORTANT: Always set the parking brake when leaving the tractor unattended.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operators Manual Tableofcontents California Proposition 65 Warning ImportantsafeoperationpracticesDataindicatesthatoperators,age60yearsand Towing MOWiHOIH REVERSEiSHOTHECOMMEHDED Seroljs iNJURY or DeathHEVERCARRYCHILDRENEVENWiTHBLADESOFF Sontsa 15o Tire Pressure AttachingtheBatteryCablesTRACTORSET-UP ShippingBraceRemovalKnowyourlawntractor ChokeControl IgnitionSwitchModuleSeatAdjustmentLever ThrottleControlLeverPTOBlade Engage BatteryCruiseControl BrakeReverseCautionMode SafetyInterlockSwitchesTo use the Reverse Caution Mode OperatingyourlawntractorStoppingthe Engine SettingtheGaugeWheelsStartingthe Engine DrivingTheTractor SettingTheCruiseControlEngagingtheParkingBrake Mowing UsingtheDeckLiftLeverOperatingtheHeadlights MovingTheTractorManually46-inch Becks MulchingInch Decks Sideto Side MakingadjustmentsLevelingthe Deck Front To RearSteeringAdjustment ParkingBrakeAdjustmentSeatAdjustment EngineOil Type MaintainingyourlawntractorEngine EngineOil RecommendationsRe-fillingtheCrankcasewith Oil ChangingtheEngine011Changingthe Oil Filter AirFilter SmartJetTM Cleaningthe EngineAndDeckPaper ElementTwin Cylinder Engine Lubrication Carburetor AdjustmentTroubleshooting CuttingBlades TiresFuse Charging BatteryCuttingDeckRemoval Jump StartingChangingthe DeckBelt ChangingTheTransmissionDriveBelt HydrostaticTransmissionAll Models LT1045& LT1046 OFF-SEASONSTORAGE MaintenancescheduleDate Hour Meter Maintenance Performed by MaintenancelogPossible Causes TroubleshootingAttachment Accessory ATTACHMENTS& AccessoriesIT1046 IT1050 ReplacementpartsCapacities SpecificationsLT1042 LT1045 LTI050Manufacturers Warranty Coverage Kohlerco Page Cubcadet LLC, P.O. BOX361131CLEVELAND,OHIO44136-0019

LTI050 specifications

The Cub Cadet LTI050 is a standout lawn care solution designed for both residential and commercial users who value efficiency and durability. With its powerful engine and innovative features, this riding lawn mower is built to tackle a variety of terrains while ensuring a high-quality cut.

At the heart of the LTI050 is a robust engine that delivers exceptional performance. Its reliable horsepower allows it to handle tough grass conditions with ease. This makes it suitable for larger lawns and properties where efficiency is key. The engine is designed for fuel efficiency, reducing the need for frequent refueling and providing longer operating times on a single tank.

One of the most notable features of the LTI050 is its cutting deck. The mower comes equipped with a high-performance cutting deck that offers precise results. Available in various cutting widths, it allows users to choose the best size for their mowing needs. The deck is engineered to enhance airflow and grass flow for a superior cut, resulting in a clean lawn appearance.

The Cub Cadet LTI050 also incorporates advanced technology that enhances the user experience. With its easy-to-use control panel, operators can easily adjust the mower settings, including cutting height and speed, with just a few simple steps. The inclusion of a hydrostatic transmission ensures smooth acceleration and deceleration, providing a more enjoyable mowing experience.

Comfort is a top priority in the LTI050 design. It features an ergonomic seat, adjustable steering, and strategically placed controls to minimize operator fatigue during extended use. The overall layout of the controls is intuitive, making it accessible for users of all experience levels.

Durability is another hallmark of the Cub Cadet brand, and the LTI050 is no exception. Constructed with high-quality materials and components, this mower is built to withstand the rigors of regular use. Its rugged frame and reinforced deck ensure it can handle challenging terrains without compromising performance.

Overall, the Cub Cadet LTI050 is a versatile and reliable choice for anyone looking to maintain a pristine lawn. With its high-performance engine, superior cutting technology, and user-friendly design, it represents a perfect blend of power and convenience, making lawn care a more efficient and pleasurable task. Whether for personal use or commercial landscaping, the LTI050 stands out as a top contender in its class.
Top Page Image Contents